We are thinking of adding WASAPI driver support for the various programs. I'm wondering if people use WASAPI drivers with other programs. And if they do: - does it work well - what interface are they using? Is it multi-port and do the WASAPI drivers show up in stereo pairs (so that an 8-port interface would show up as 4 stereo inputs)
They just show up as a stereo in or 2 mono with WASAPI, there's no multichannel. The ASIO4All gives you all inputs of all devices (this is handy if you are using 2 devices for recording that are synced with optical or rca cable) but you get that GS Wavetable error thing unless everything else is closed.
I use the WASAPI with the onboard audio for playback/mixing that works good, rather than having a good ASIO interface plugged in and on all the time just for playback. I lent a 16ch USB Phonic Mixer to someone, they used it as a soundcard so it was left on all the time so the internal power supply blew, but I fixed it after replacing a lot of parts, so now I only use the multichannel interfaces for recording only.
Thanks for the reply and the video demonstration. So WASAPI is strictly for a single stereo input. Not more than that.
It is confusing because I've been told that Presonus interfaces hav wasapi that can do multiple audio in. We have a presonus on order, so I will check that out.
"Improved Built-in Audio Support: With new WASAPI drivers, SONAR now delivers extremely low-latency performance with laptops and tablets that can rival pro audio devices—we’re talking truly high-performance mobile setups, whether for Artist, Professional, or Platinum. "
+++ Documentation 2 +++ I find it very interesting that Cakewalk makes a distinction to select WASPI as the driver for onboard (built into the computer motherboard) audio devices and ASIO for external devices.
I know some of this information does not exactly match your request for information but many users in this forum are also active in the Sonar forum so I'm hoping this may prompt them to add their personal experience using the WASPI driver selection.
I sometimes use the Windows 7 WASAPI driver selection on a Dell laptop while using Cakewalk's Music Creator 6 DAW or the open source Audacity wave editor. While using the WASAPI driver both programs offer additional audio input and output devices that I otherwise would have difficulty using. The WASAPI driver adds native support for USB microphones, headphones and speakers. Latency varies around 10 - 12 milliseconds while using the USB devices.
That's with the TASCAM. I just tried it with the Avid Rack and I get 18ch with with ASIO but 12ch with WASAPI.
Yes I remember trying that Exclusive thing with ASIO4All but the only thing that worked for me now as I remember is Vista Midi Fix http://www.benryves.com/products/vistamidi this sets the default midi output device for Windows, and I set it to Coolsoft, see before after below:
This is potentially interesting. I switched to ASIO (I have an ASIO driver available with my Zoom audio interface although I also have ASIO4ALL installed on my PC) as I was having latency issues with the BIAB default driver and it fixed the latency issues when recording to BIAB. Unfortunately, afterwards, I found my midi controls to external devices had stopped. Is there anything in ASIO that alters midi messages? Mine were going out on Channel 4 and 16. If ASIO has nothing to do with those kind of problems, is there any other down side to using ASIO or would I be better to try to set up WASAPI which I have yet to track down let alone use!
Windows 10 Home 20H2 Build 19042.487 BIAB 2021 (Build 818) Intel(R) Core(TM), i3-4160, CPU @3.60 GHz RAM 16 GB, 64 Bit X64-based processor Zoom UAC-2 (USB 3 interface-built in midi) VoiceLive 3 Extreme, Sputnik Valve Condenser Mic
I just got rid of all my USB interfaces to go back to old school analog mixer with a Behringer 802. I was tired of mucking with ASIO and latency etc.
I did find that WASAPI is handy in Audacity as I can run my motherboard line ins and outs through my mixer using the LOOPBACKS it provides, so I can, for example, mix my Kentron SD100 to do MIDI along with RealTracks.
I suspect this might get me around the limitation to use DXi for MIDI when I output to .WAV / .MP3 in BIAB. I had been using Audacity for this purpose, when I want to record to digital audio using an external sound module.
I've been using ASIO from the start. What little I know about WASAPI is that it's Windows answer to ASIO. Very similar in how it acts and if I understand correctly, it allows sharing mode so that multiple audio devices can use it at the same time. It is supposed to be a low latency driver. It allows bypassing of the audio mixer and the default settings according to what I read. It is recommended as an audio driver when MME, and ASIO are problematic in one way or the other. If your ASIO driver provides excellent service, there is no advantage to using WASAPI.
It is simply one other option to use for running an audio product. It is proprietary so the device or software has to be designed to be compatible with WASAPI in order to function properly using it.
AS far as PG adding it to the compatibility list, I think that would be a good idea since some people may actually find that WASAPI is the fix they need to run a low latency system with some of the off brand interfaces on the market.
You can find my music at: www.herbhartley.com Add nothing that adds nothing to the music. You can make excuses or you can make progress but not both.
The magic you are looking for is in the work you are avoiding.
"Proprietary" is sometimes an advantage (look at Apple) when you own the stack from hardware through OS and drivers.) I've found the Surface Pro the most stable "laptop" I have ever used. I don't mind a Windows-specific technology when it comes to multimedia (as MSFT has ignored this area for so long.)
I've made an entire CAREER out of Microsoft's inadequacies, so I'm not about to abandon Windows any time soon.
Band-in-a-Box® 2025 pour Windows est disponible en Français.
Le téléchargement se fait à partir du site PG Music
Pour ceux qui auraient déjà acheté la version 2025 de Band-in-a-Box (et qui donc ont une version anglaise), il est possible de "franciser" cette version avec les patchs suivants:
Band-in-a-Box 2025 für Windows Deutsch ist verfügbar!
Die deutsche Version Band-in-a-Box® 2025 für Windows ist ab sofort verfügbar!
Alle die bereits die englische Version von Band-in-a-Box und RealBand 2024 installiert haben, finden hier die Installationsdateien für das Sprachenupdate:
Update Your Band-in-a-Box® 2025 to Build 1128 for Windows Today!
Already using Band-in-a-Box 2025 for Windows®? Download Build 1128 now from our Support Page to enjoy the latest enhancements and improvements from our team.
Already using RealBand® 2025 for Windows®? Download Build 5 now from our Support Page to ensure you have the latest enhancements and improvements from our team.
PowerTracks Pro Audio 2025 is here! This new version introduces many features, including VST3 support, the ability to load or import a .FLAC file, a reset option for track height in the Tracks window, a taller Timeline on the Notation window toolbar, new freeze buttons in the Tracks window, three toolbar modes (two rows, single row, and none), the improved Select Patch dialog with text-based search and numeric patch display, a new button in the DirectX/VST window to copy an effects group, and more!
First-time packages start at only $49. Already a PowerTracks Pro Audio user? Upgrade for as little as $29!
Video: Summary of the New Band-in-a-Box® App for iOS®
Join Tobin as he takes you on a tour of the new Band-in-a-Box® app for iOS®! Designed for musicians, singer-songwriters, and educators, this powerful tool lets you create, play, and transfer songs effortlessly on your iPhone® or iPad®—anytime, anywhere.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean