Hi guys, Thank you for all your help & suggestions; I think I've found an HP laptop that fits the bill. It's within my price range, and the specs meet the recommendations as suggested by the forum. Just one problem - it doesn't have a line in. I currently have my keyboard connected to the Ketron, which has stereo RCA output, through a lead to a 3.5mm (?) jack that goes into the line in of the laptop.
Without a line-in, is there another way to connect the Ketron to the HP - perhaps some sort of adaptor? TIA
Maybe the line in and line out are combined? Seems strange. You can always use a USB output for sound. As mentioned a good audio interface will be most suitable if the budget stretches. I use the the UA-2 by Zoom as it's USB 3. There are others by Zoom. Personally I love Zoom products but a lot of people on the site like Focusrite, and there are loads of others. Even some of these fancy mixers..... if live is going to be your thing. :-)
Windows 10 Home 20H2 Build 19042.487 BIAB 2021 (Build 818) Intel(R) Core(TM), i3-4160, CPU @3.60 GHz RAM 16 GB, 64 Bit X64-based processor Zoom UAC-2 (USB 3 interface-built in midi) VoiceLive 3 Extreme, Sputnik Valve Condenser Mic
Hi Ed, I'm not sure. I believe the signal that comes from the Ketron SD2 is MIDI. Currently I connect a regular RCA/3.5mm lead from the Ketron output to the line in of the laptop. I hoping someone who uses a Ketron & a laptop without line in will jump in.
Like Matt said, you're going to need an external interface that has line-in capability to get the audio from the Ketron back to your computer.
I've got a Ketron SD-2 (and unfortunately, it is failing, so I can use it much anymore, however....).
The Ketron accepts MIDI input from either a computer or a keyboard. It generates the audio from that input and sends it out via a stereo audio connection. That's why you need the "line-in" on your computer to be able to record the Ketron's output in real time (you have to records it; you can't render it like you can with a DXi or a VSTi).
So, something like Matt's suggestion should work for you. Here is how I had my system set up (I have an M-Audio Fast Track Pro, which has audio in, audio out, MIDI in and MIDI out capability).
My Fast Track pro is connected to my computer via USB and is seen by the computer as an available sound card. The USB is a bi-direction connetion that supports audio and MIDI data across the connection. I then have the MIDI out of the FastTrack connected to the MIDI in of the Ketron (which allows MIDI data from the computer to drive the Ketron; however, you could just have the MIDI out of your electronic keyboard connected to the MIDI in of the Ketron, which allows the keyboard to drive the Ketron). Then the output from my Ketron goes to a stereo audio input on my hardware mixer unit and then the mixer unit is connected to the audio in on my Fast Track pro (via balanced cables for clean sound) so that the audio data from the Ketron can be recorded back into the computer. You don't need the intermediary mixer (the Ketron audio out could go directly to the audio in of your external sound card); however, this allows me to also use the mixer for microphone records and other instrument recordings.
Below is a rough picture of how I do it with my laptop:
John
Laptop-HP Omen I7 Win11Pro 32GB 2x2TB, 1x4TB SSD Desktop-ASUS-I7 Win10Pro 32GB 2x1.5TB, 2x2TB, 1x4TB SATA
Now that Band in a Box comes on its own hard drive, has that changed anything, as far as what computer to use?
No, that has nothing to do with it. The PGM hard drive is just another external storage device, it's not processing anything. The processing is done by your CPU in your computer.
Keith, you said you're not very technical and I can certainly see that's true. I sympathize because about 15 years ago I was right there with you. I decided to get into digital audio and knew absolutely squat about any of it. I could barely spell MIDI much less understand what it was.
First, Bob's Mantra: "Midi is not audio, audio is not MIDI, ommmm."
Once you understand that, the first question is what exactly are you recording? Are you using the Ketron as a sound source for Biab? If so that's for Biab's MIDI tracks, the Real Tracks/Drums are all audio, not MIDI so the Ketron is not doing anything with the RT/RD's
Next is do you sing, are you wanting to record your vocals?
Next do you want to record anyone else like a singer, a guitarist, whatever?
Right now you have a laptop and a Ketron. The Ketron is a synth that accepts a MIDI signal and converts that to audio. Go back to Bob's mantra and understand that. It converts MIDI to audio. How do you hear or record the audio? To simply hear it you take the RCA audio jacks out of the Ketron and plug them into your amp or studio monitors. To record that audio you have to run those RCA's into your laptop and then the audio FROM the laptop goes to your sound system unless you want to listen to everything on the little crappy laptop speakers. The headphone out's from the laptop can sound pretty good, you could use an audio adapter to run the audio from the headphone out to your sound system.
If your laptop has a line out but no line in then you need something to get the audio into the laptop. The only way is to use a USB interface. That interface plugs into your laptop using it's USB port, it's the USB that carries the audio from your Ketron. The interface has inputs for your mic or any instruments (which are audio inputs). That means you need an interface with two audio inputs for L and R stereo. Those come from the Ketron. You could use something as simple as this:
ALL this does is run the audio out from the Ketron to a USB line into your laptop. Personally I think it's a waste of money because you'll realize you want some other inputs too like a mic for example. But if all you want is a way to get the audio from the Ketron to your laptop then this is all you need plus a couple of 1/4" to RCA adapters. Then use the headphone out of your laptop to your sound system.
This is enough of a lesson for the moment. Let us know exactly what you're trying to do.
Now that Band in a Box comes on its own hard drive, has that changed anything, as far as what computer to use?
I do not disagree with anything Bob jazzmammal said. I'll just point out that I think there is something to consider if you are really trying hard to squeeze out the best performance. BIAB runs fine from the supplied USB drive. But it will run better if the program is loaded onto an internal hard drive, and much better if loaded onto an internal SSD drive.
Most laptops you can buy have a SSD boot drive (the only drive) as standard or an option, but it isn't large enough capacity for all of BIAB, and maybe not even for just the program without the RealTracks. In a desktop, you can easily pop in a SSD just for the BIAB program; this is what I did. Then save the RealTracks on an internal fast hard drive that will always be faster than an external USB drive (again, this is what I did). Extreme and more expensive? Yes. But for me as a composer it is worth it.
BIAB 2024 Win Audiophile. Software: Studio One 6.5 Pro, Swam horns, Acoustica-7, Notion 6; Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus Studio 192, Presonus Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors
Hi again, Thank you all for your assistance. John - thank for going to the trouble of showing me your set up - very impressive.
Matt - as always your knowledge & advice is always first class - thank you.
Bob -
Originally Posted By: jazzmammal Keith, you said you're not very technical and I can certainly see that's true. I sympathize because about 15 years ago I was right there with you. I decided to get into digital audio and knew absolutely squat about any of it. I could barely spell MIDI much less understand what it was.
I still can't spell MDII
Next is do you sing, are you wanting to record your vocals?
No ... my singing is cr*p
Next do you want to record anyone else like a singer, a guitarist, whatever?
No, just me and my keyboard.
This is enough of a lesson for the moment. Let us know exactly what you're trying to do.
Bob
Bob , thank you. I was of the (mis)understanding that the signal coming out of the Ketron was MIDI, but now I understand that its not. I can now look at finding a suitable connection as per your recommendation.
OK, I see in your other thread you were asking about a MIDI to USB converter cable. In this thread I assumed you already had one of those because you said here you needed to get the audio out of your Ketron since the new laptop doesn't have a line in like the old one did. Since the Ketron can only produce audio from an incoming midi signal that begs the question, how have you been using the Ketron up to now if you don't already have a midi connection cable?
This is why I asked you exactly what are you planning to do with your equipment in this case a keyboard and the Ketron. To be specific:
1. What make and model of keyboard do you have and what kind of midi connections does it have?
2. How do want to use your keyboard? Is it to play along with Biab and you want to record the audio only? If you connect the midi from your keyboard to the Ketron you can use the Ketron for better/different sounds than what the keyboard produces internally.
3. When you use Biab do you use some midi styles or do you use all Real Tracks? Your Ketron can really make the midi styles come to life.
Answers to these questions will help us to figure out just what you need. it's possible you can get away with a couple of cheap midi to USB cables but lets find out.
Hi Bob, Thanks for your continuing interest & help. The previous thread you referred to relates to a replacement cable, rather than a new item. My current setup (which works fine) is as follows:
Casio WK1800 keyboard -> Edirol UM1X interface - 1 DIN into Casio & the other into -> Ketron SD2. The USB from the interface into the Toshiba laptop. Ketron via RCAs to 3.5mm lead into line in of laptop. Laptop headphone out via graphic equalizer into amp.
I've had the Ketron for a number of years now, and I absolutely love it. The sounds it produces, particularly the higher bank patches are great, and combined with Real Tracks, they make a simple piano player like me sound half good
I'm hoping that the solution will be simply a lead with RCA stereo jacks (from the Ketron) and a USB (to the new laptop).
We need to know, you are not likely to run into the highest end studios and see a MacBook Pro running Garage Band, although I am told Willie's Austin studio has good ol' Pro Tools at the core. You might see a rack of something like these: http://tascam.com/product/da-3000/
Scroll down to the schematic and note the components include transformer (no 12v converter in the wall) DAC and ADC modules, and a few other things. run the And, the clock to snyc them. The channel faders are in another room.
I only point this out to advise you as to what you are hoping to duplicate with the system you are putting together. Don't spend too much time reinventing the wheel.
It doesn't take long to get up to $1,299 putting components together. They have to balance. If it runs cakewalk, it probably will run BIAB. If not, run the BIAB on a laptop.
Risking being rude by replying to my own post, one other general knowlege topic we should all be familiar with are is the processors. Questions one: AMD or Intel? Question two: Intel Core i5 or Intel Core i7? Compare Intel processors. Four core, eight thread, recomended for audio visual media work.
Video: Making a Song with Band-in-a-Box®, ChatGPT, and Synth V
Take your Band-in-a-Box® project to a whole new level when you incorporate ChatGPT and Synth V to add lyrics and vocals to your song!
We wanted to demonstrate how this is done with our video, where we show you how to go from nothing to a finished "radio ready" modern pop song by combining the features of Band-in-a-Box®, ChatGPT, and Synth V!
User Video: Next-Level AI Music Editing with ACE Studio and Band-in-a-Box®
The Bob Doyle Media YouTube channel is known for demonstrating how you can creatively incorporate AI into your projects - from your song projects to avatar building to face swapping, and more!
His latest video, Next-Level AI Music Editing with ACE Studio and Band-in-a-Box, he explains in detail how you can use the Melodist feature in Band-in-a-Box with ACE Studio. Follow along as he goes from "nothing" to "something" with his Band-in-a-Box MIDI Melodist track, using ACE Studio to turn it into a vocal track (or tracks, you'll see) by adding lyrics for those notes that will trigger some amazing AI vocals!
Wir waren fleißig und haben über 50 neue Funktionen und eine erstaunliche Sammlung neuer Inhalte hinzugefügt, darunter 222 RealTracks, neue RealStyles, MIDI SuperTracks, Instrumental Studies, "Songs with Vocals" Artist Performance Sets, abspielbare RealTracks Set 3, abspielbare RealDrums Set 2, zwei neue Sets von "RealDrums Stems", XPro Styles PAK 6, Xtra Styles PAK 17 und mehr!
Add updated printing options, enhanced tracks settings, smoother use of MGU and SGU (BB files) within PowerTracks, and more with the latest PowerTracks Pro Audio 2024 update!
Download and install this to your RealBand 2024 for updated print options, streamlined loading and saving of .SGU & MGU (BB) files, and to add a number of program adjustments that address user-reported bugs and concerns.
Did you know... not only can you download your Band-in-a-Box® Pro, MegaPAK, or PlusPAK purchase - you can also choose to add a flash drive backup copy with the installation files for only $15? It even comes with a Band-in-a-Box® keychain!
For the larger Band-in-a-Box® packages (UltraPAK, UltraPAK+, Audiophile Edition), the hard drive backup copy is available for only $25. This will include a preinstalled and ready to use program, along with your installation files.
Backup copies are offered during the checkout process on our website.
Already purchased your e-delivery version, and now you wish you had a backup copy? It's not too late! If your purchase was for the current version of Band-in-a-Box®, you can still reach out to our team directly to place your backup copy order!
Note: the Band-in-a-Box® keychain is only included with flash drive backup copies, and cannot be purchased separately.
Handy flash drive tip: Always try plugging in a USB device the wrong way first? If your flash drive (or other USB plug) doesn't have a symbol to indicate which way is up, look for the side with a seam on the metal connector (it only has a line across one side) - that's the side that either faces down or to the left, depending on your port placement.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.