Otherwise I just wanted to see if BIAB would make sense as a tool for some musical goals I'm trying to accomplish.
One thing I love is how you give BIAB a number of 1 measure phrases and then it sort of randomizes them. This is especially useful for percussion. I have some different drum machines, groove boxes, and an electronic drum kit. Would it be feasible to create or edit a style where I record a whole ton of phrases myself via midi from these different devices? Would it capture the sounds or just the midi information? Or is BIAB the wrong tool for this kind of job?
If it is possible for me to build a song this way, would it be easy to then experiment swapping out different midi instruments while the track is playing to find the sounds that I like the best?
Sorry if either of these questions are too basic, I have been reading the tutorials and watching videos, I'm trying to figure out if my goals are even possible before I spend all this time trying to figure it out.
You are essentially describing creating loops and samples with your question. Biab can do the things you are wanting to do but any DAW will do it faster, easier and better in most conceivable aspects than Biab. DAWs are designed to do that type task whereas Biab is not. Biab can use loops and samples, contains loops and samples and is a great place to construct your song. There is simply little reason to do so unless you wish to use additional features of Biab such as RealTracks, Supermidi, midi or RealDrums. Or, perhaps use Biab to scratch out ideas.
Some DAWs are better suited by design to work with loops and samples than others such as Logic, Ableton Live and FL Studio. However, most every commercial DAW will be more than competent. It is better to work with a DAW you understand and are familiar with than change to another DAW because it recommended for loops and samples.
Thanks for the reply! I guess the only thing I wonder about is how easy is it to structure a song in another DAW? BIAB has been very intuitive so far, since I think in terms of traditional musicianship. Everything is bars, and choruses, repeat signs, bla bla. I've not seen that in any DAWs I've looked at. Also, are there DAWs that do what BAIB does in terms of randomizing phases within a style? Like, if I create some percussion within a DAW I have to create every second of it, then if I don't like the way it sounds I have to do it all over again and again. Wouldn't BAIB allow me to save some time in that regard if I used it to create percussion?
Sorry if I'm not explaining myself very well. Basically I like the "robot drummer with some degree of autonomy" that BAIB provides. But maybe stuff like FL studio and Ableton do that too?
Yes, to your question of randomizing phrases. That's actually a unique feature of Biab/RealBand. Each time you regenerate a track, it changes from the previous version. You can also force these variations to occur and somewhat control them using various means such as part markers, pushes rests and stops, as well as slash chords. I made some additional suggestions over in your other post also.
I'm particularly enjoying following your posts because you are working within a genre that's not featured very much here in the BIAB forum but is a genre certainly within the programming capabilities of BIAB. Your work may inspire others to try this genre too.
I urge you to post some of your ongoing projects onto the BIAB Users Showcase to get other Biab users feedback and recommendations. They are very respectful even if they may not follow your particular genre of music, but for you, it as a wonderful way to fast track your learning how to work with BIAB all the while letting the world hear your original music. Covers can't be posted to the Users Forum and a PGMusic produce must be used in creating the finished work in some manner.
Cool, thanks for all of your help so far. Next time I sit down my plan is going to be to pick an existing style and see how far I can take editing that style, and play with how far I can push that style from what it started out as. I'd REALLY like to have more control of the types and amounts of rhythm phrases that BIAB will randomize, that's kinda how I approach percussion.
I'll also play around with mixing and matching from different styles to see what happens. So, one more thing if you don't mind: I can only edit things in Style Maker that are pure MIDI right? I cannot edit real tracks, real drums, or live drums (pre recorded phrases?), correct? Can I edit midi styles than later assign real tracks and real drums to the phrases I edited?
I'll figure it out eventually I'm sure, and yes I will certainly be sharing stuff here once I start making some progress.
In style maker, you can only edit MIDI events. You can include RealTracks in a style; however, it's just a matter of picking an existing RealTrack for that particular track in the style and it will play according to how the RealTrack engine processes it. You can't edit it.
But for MIDI tracks, you have the flexibility to edit as much as you wish.
For a drum track, each pattern is up to one 4-beat bar in length, broken down into 16th notes (if you use the grid); however, you can also import "live" played drums for each bar as well. You get 14 slots (or 14 bars worth of content) for the "A" substyle and 14 slots for the "B" substyle. You also get 14 slots for drum fills (which will play when transitioning between the "A" and "B" substyles. And you get 14 slots for the 2-bar song ending.
Also, don't forget that you can define multi-styles, which basically daisy chain individual style files together to give you "C", D" and "E", F" and "G", "H" etc. substyles for as many as you wish.
If you want to create MIDI riffs for the other instruments, you get 30 slots to work with. For the "A" substyle, you get 30 8-beat slots, 30 4-beat slots, 30 2-beat slots, and 30 1-beat slots. Likewise for the "B" substyle, and then 30 slots for the 2-bar song ending. What happens is that if a chord's duration is 8 beats or longer, BIAB will pick riffs from the 8-beat slots; if a chord's duration is 4 beats, it will pick from the 4-beat slots; likewise for 2-beat and 1-beat. And again, with multi-styles, you can have very many riffs.
John
Laptop-HP Omen I7 Win11Pro 32GB 12TB SSD Desktop-ASUS-I7 Win10Pro 32GB 12TB SATA
Hey there, thanks for the response! That's what I figured out RealTracks, I'm thinking it'd be more useful for me to just acquire better MIDI samples and prioritize those over RealTracks if I'm trying to so something really specific.
Also, this is copy and pasted from a different question I had about editing in stylemaker. Basically I was trying to build something from scratch (following the tutorial mind you) and BIAB just started adding in weird rhythm tracks that showed up in the mixer, but were nowhere to be found in stylemaker editer:
""Hi, just got BIAB a few days ago and I've been messing around with it, trying to figure out how it works. I've run into some hiccups with the style maker.
First I tried editing an existing style like the tutorial suggested and that went ok, I get how it works more or less. Then I tried building a style from scratch. I went into the drum grid and put some patterns in. Then, as soon as I save it and hit play I hear all these extra drum sounds on the drum and loop channels in the mixer. They are sort of blended in with the drums I recorded. Has anyone else had this problem? What is going on?""
If you have any insights about this I'd love to hear, just so have a better gut feeling of what is going on when I work with the thing you know?
Some styles have loops defined in them; I would avoid those if you are looking to modify an existing style. I would probably start with the BLANK.STY and go from there, and then after saving the style, make sure your saved style is what is loaded in BIAB. In general, you shouldn't get weird sounds.
John
Laptop-HP Omen I7 Win11Pro 32GB 12TB SSD Desktop-ASUS-I7 Win10Pro 32GB 12TB SATA
OK, I suspect my problem is that I did not start from BLANK.STY, perhaps assuming that that would happen automatically. I will check that out later, thank you!
Band-in-a-Box® 2025 for Mac® users: Build 904 now available!
If you're already using Band-in-a-Box® 2025 for Mac®, make sure to grab the latest update! Build 904 is now available for download and includes the newest additions and enhancements from our team.
PowerTracks 2026 is here—bringing powerful new enhancements designed to make your production workflow faster, smoother, and more intuitive than ever.
The enhanced Mixer now shows Track Type and Instrument icons for instant track recognition, while a new grid option simplifies editing views. Non-floating windows adopt a modern title bar style, replacing the legacy blue bar.
The Master Volume is now applied at the end of the audio chain for consistent levels and full-signal master effects.
Tablature now includes a “Save bends when saving XML” option for improved compatibility with PG Music tools. Plus, you can instantly match all track heights with a simple Ctrl-release after resizing, and Add2 chords from MGU/SGU files are now fully supported... and more!
Get started today—first-time packages start at just $49.
Already using PowerTracks Pro Audio? Upgrade for as little as $29 and enjoy the latest improvements!
Band-in-a-Box 2026 for Windows Special Offers End Tomorrow (January 15th, 2026) at 11:59 PM PST!
Time really is running out! Save up to 50% on Band-in-a-Box® 2026 for Windows® upgrades and receive a FREE Bonus PAK—only when you order by 11:59 PM PST on Thursday, January 15, 2026!
We've added many major new features and new content in a redesigned Band-in-a-Box® 2026 for Windows®!
Version 2026 introduces a modernized GUI redesign across the program, with updated toolbars, refreshed windows, smoother workflows, and a new Dark Mode option. There’s also a new side toolbar for quicker access to commonly used windows, and the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, making it easier to customize your workspace.
Another exciting new addition is the new AI-Notes feature, which can transcribe polyphonic audio into MIDI. You can view the results in notation or play them back as MIDI, and choose whether to process an entire track or focus on specific parts like drums, bass, guitars/piano, or vocals. There's over 100 new features in Band-in-a-Box® 2026 for Windows®.
There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
Upgrade your Band-in-a-Box for Windows to save up to 50% on most Band-in-a-Box® 2026 upgrade packages!
Plus, when you order your Band-in-a-Box® 2026 upgrade during our special, you'll receive a Free Bonus PAK of exciting new add-ons.
If you need any help deciding which package is the best option for you, just let us know. We are here to help!
Band-in-a-Box® 2026 for Windows® Special Offers Extended Until January 15, 2026!
Good news! You still have time to upgrade to the latest version of Band-in-a-Box® for Windows® and save. Our Band-in-a-Box® 2026 for Windows® special now runs through January 15, 2025!
We've packed Band-in-a-Box® 2026 with major new features, enhancements, and an incredible lineup of new content! The program now sports a sleek, modern GUI redesign across the entire interface, including updated toolbars, refreshed windows, smoother workflows, a new dark mode option, and more. The brand-new side toolbar provides quicker access to key windows, while the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, creating a flexible, clutter-free workspace. We have an amazing new “AI-Notes” feature. This transcribes polyphonic audio into MIDI so you can view it in notation or play it back as MIDI. You can process an entire track (all pitched instruments and drums) or focus on individual parts like drums, bass, guitars/piano, or vocals. There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
There are over 100 new features in Band-in-a-Box® 2026 for Windows®.
When you order purchase Band-in-a-Box® 2026 before 11:59 PM PST on January 15th, you'll also receive a Free Bonus PAK packed with exciting new add-ons.
Upgrade to Band-in-a-Box® 2026 for Windows® today! Check out the Band-in-a-Box® packages page for all the purchase options available.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean