David S asked about this and this is what I sent him.
Several years ago floyd told me that he often doubled the snare by using a second track and positioning a snare hit snippet under each BiaB snare hit on the wave form. I later discovered that for each RD there is an audio file hidden in the depths of BiaB folders that includes several minutes of the drum track and at the end has the actual individual hits, e.g., snare, kick, tom, ride, high hat, etc.
So my method is to cut the snare hit out of the respective “hidden” RD drum audio file and use it for the double. Since the RD is, well, a real human, lining them up was tedious at first as the RD snare would not always be right on the beat but for a, say, three minute song it only takes about 15 minutes or so. Then you can process the snare track anyway you wish and it's the same snare that's in the original full kit. I used Ozone’s imager module to “spread” the sound a bit and them pan it dead center. Some times I'll pull out other hits from the RD audio file to build my own drum intro, etc.
Oh, my DAW (Logic Pro X) has a snare replacement function designed for it's drummers but it works pretty well on a RD; however, I think doubling them as mentioned above with the same sound works best. I love the snare sound that Mellecamp has had for decades and that's the sound I aim for. Farm rock
Bud
Our albums and singles are on Spotify, Apple Music, Amazon Music, YouTube Music, Pandora and more. If interested search on Janice Merritt. Thanks! Our Videos
I later discovered that for each RD there is an audio file hidden in the depths of BiaB folders that includes several minutes of the drum track and at the end has the actual individual hits, e.g., snare, kick, tom, ride, high hat, etc.
Hey Bud, I dug up an old post from the "Post your own Tips and Tricks" forum where I went into detail a little more on that in case anyone is interested:
I later discovered that for each RD there is an audio file hidden in the depths of BiaB folders that includes several minutes of the drum track and at the end has the actual individual hits, e.g., snare, kick, tom, ride, high hat, etc.
Hey Bud, I dug up an old post from the "Post your own Tips and Tricks" forum where I went into detail a little more on that in case anyone is interested:
Thanks! I knew I couldn't have been the first to find that
Bud
Our albums and singles are on Spotify, Apple Music, Amazon Music, YouTube Music, Pandora and more. If interested search on Janice Merritt. Thanks! Our Videos
Could you pls help me with this question. If you generate a song in BIAB, usually it only has a few tracks (bass, drum, guitar, piano, synth). If you add your own vocal singing the melody, and some harmony vocals, it seems you still only have about 10 tracks.
But when I saw some mixing tutorials on the web, especially for the professional songs, apparently a song may have 60, 70 tracks.
A typical EDM track has 60 to 100 tracks. The magic answer is 'layering'. A lot of layering goes into tracks that are done properly. On synths, atmosphere, kicks and other elements as well like claps, hi hats, etc. 60 kind of seems low actually but again, depends on what kind of music you are making. For EDM is super low. Maybe even for trap music too.
Also go on Google and type 'Hyperbits Revolution'. Click on the first link and half way through the page is a video tutorial. It's an hour long tutorial and you'll learn TONS! Even if you're not and EDM producer, it should give you a good idea on how to make real professional tracks. Dude easily has over 80 tracks.
One observation--actually several. EDM is kind of its own thing. It is also constantly evolving.
You CAN make an EDM composition with 200 tracks but you can also use any one of the EDM or techno styles from BIAB and add in your own string parts and piano parts and such and make an EDM song with 10 tracks or less.
Put side by side, it's user's choice. The listener will decide.
(I found the guy's comment about the basic Compressor unit looking like something from NASA was funny. It was like "Man you haven't seen complicated. That's a cereal bowl full of fruit loops and warm milk, dude.")
Anyway, in music you can do anything you want. If you want to paste together a great song with 5000 samples, you can do it. But you can also do great song in EDM with 12 tracks or a great jazz song with 3 tracks. Or one.
Also, people who play instruments and who have been studying piano or guitar since they were two years old will never agree with loopers on how many tracks you need to make a professional song.
But, since you can do whatever you want in music, I say do it. If you write the greatest song in the world with two tracks and both of them done on the first take I say bravo. If you spend 4 days pasting together 100 synths to do as many variations of the same piano riff, well bravo to that too.
Come to think of it, though, I think I get the most goosebumps listening to Hilary Hahn do one track.
But, well, she has a lot going on, that Hilary Hahn.
David Snyder Songwriter/Renaissance Man Studio + Fingers
I think she was actually in her early 20's at the time of that Ronnie Scotts gig. And the ultimate track for me from that particular concert that showcases her talent is this one:
I think she was actually in her early 20's at the time of that Ronnie Scotts gig. And the ultimate track for me from that particular concert that showcases her talent is this one:
I think she was actually in her early 20's at the time of that Ronnie Scotts gig. And the ultimate track for me from that particular concert that showcases her talent is this one:
I keep readindg here about how double tracks fattens up the sound.how does that work?If I copy and paste my vocal to a second one surely it just makes itlouder.Then I'd have to knock a few db off both and I'm back where I started. Open to offers!lol Wendy
BiaB2022PLUS,927. every extras pack I can find ;-),Sonar7XL,Win 10
I keep readindg here about how double tracks fattens up the sound.how does that work?If I copy and paste my vocal to a second one surely it just makes itlouder.Then I'd have to knock a few db off both and I'm back where I started. Open to offers!lol Wendy
Hi Wendy,
If you just copy and paste your vocal onto a new track then yes; when you combine them you will just end up with a vocal twice as loud.
To get a fatter or bigger sound the best way is to actually sing the same part twice. The reason it then sounds fatter is because it is just about impossible for you to sing them identical both times, they will be off slightly in pitch and in timing.
There are tools that simulate this doubling effect, but best way is to just sing it twice IMHO.
Dave's advice is very good. If you can't or don't want to sing it twice there are a few tricks you can try:
1-Copy your vocal twice. Pan you first track dead center. Pan the second track far left and detune it down a couple of cents. Then pan the third track far right and detune it up a couple of cents. You would do this in a DAW. If your DAW doesn't have detune the use your pitch bend.
2- using either two vocal tracks panned left and right or the above three tracks put a different subtle effect on the far left and right tracks. Maybe a little delay, or reverb or chorus.
3- on a single track put a very subtle chorus effect on it. This can thicken vocals.
5-Copy you vocal twice. Pan you first track dead center. Pan the second track far left and move it forward a tick or two. Then pan the third track far right and move it back a tick or two. You would do this in a DAW. Combine this with #1 and/or #2 if you wish.
Good luck and I hope this helps.
The bumper sticker said "I'm a veterinarian, therefore I can drive like an animal". Suddenly I realized how many proctologists are on the road.
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
Very similar to Mario's step 5: I getter a fatter sound by duping the main vocal twice, especially on the chorus. Pan those two new copies one hard left and one hard right. Shift the left track 10ms earlier and right track 10 ms later than the original vocal in the center. Thickens up nicely.
I think this last series of posts gets at what I was trying to offer earlier.
I ALWAYS copy the main vocal to at least two other tracks. The main stays center and the other two go left and right--slightly, I mean ever so slightly--panned.
The left and right vocals get some treatment, different for each track, maybe something from Nectar on one, and one of my own "homemade" effects chain strips on another with some tape saturation, or plate reverb, and additional EQing.
The MAIN vocal track on my stuff is sometimes completely dry and set just a little higher than the others--this gives my voice a more natural sound, but the other tracks add sweetness.
For my genre, I want to hear the grit and emotion in my voice, even the imperfections, because I am doing rock, or folk rock, or pop rock.
There are many ways to approach this but that is my recipe.
Also, your vocals will never sound twice as loud with a doubled (duped) track. The only way to make it louder is to increase the volume or gain.
Finally, signing along with yourself for another take is a whole different ball game and effect--it creates exactly what it sounds like--you singing along with yourself.
If this is not the effect you want (which is immediately evident) you need to copy and paste the track.
Hope that helps.
Happy New Year everyone.
David Snyder Songwriter/Renaissance Man Studio + Fingers
PowerTracks 2026 is here—bringing powerful new enhancements designed to make your production workflow faster, smoother, and more intuitive than ever.
The enhanced Mixer now shows Track Type and Instrument icons for instant track recognition, while a new grid option simplifies editing views. Non-floating windows adopt a modern title bar style, replacing the legacy blue bar.
The Master Volume is now applied at the end of the audio chain for consistent levels and full-signal master effects.
Tablature now includes a “Save bends when saving XML” option for improved compatibility with PG Music tools. Plus, you can instantly match all track heights with a simple Ctrl-release after resizing, and Add2 chords from MGU/SGU files are now fully supported... and more!
Get started today—first-time packages start at just $49.
Already using PowerTracks Pro Audio? Upgrade for as little as $29 and enjoy the latest improvements!
Band-in-a-Box 2026 for Windows Special Offers End Tomorrow (January 15th, 2026) at 11:59 PM PST!
Time really is running out! Save up to 50% on Band-in-a-Box® 2026 for Windows® upgrades and receive a FREE Bonus PAK—only when you order by 11:59 PM PST on Thursday, January 15, 2026!
We've added many major new features and new content in a redesigned Band-in-a-Box® 2026 for Windows®!
Version 2026 introduces a modernized GUI redesign across the program, with updated toolbars, refreshed windows, smoother workflows, and a new Dark Mode option. There’s also a new side toolbar for quicker access to commonly used windows, and the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, making it easier to customize your workspace.
Another exciting new addition is the new AI-Notes feature, which can transcribe polyphonic audio into MIDI. You can view the results in notation or play them back as MIDI, and choose whether to process an entire track or focus on specific parts like drums, bass, guitars/piano, or vocals. There's over 100 new features in Band-in-a-Box® 2026 for Windows®.
There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
Upgrade your Band-in-a-Box for Windows to save up to 50% on most Band-in-a-Box® 2026 upgrade packages!
Plus, when you order your Band-in-a-Box® 2026 upgrade during our special, you'll receive a Free Bonus PAK of exciting new add-ons.
If you need any help deciding which package is the best option for you, just let us know. We are here to help!
Band-in-a-Box® 2026 for Windows® Special Offers Extended Until January 15, 2026!
Good news! You still have time to upgrade to the latest version of Band-in-a-Box® for Windows® and save. Our Band-in-a-Box® 2026 for Windows® special now runs through January 15, 2025!
We've packed Band-in-a-Box® 2026 with major new features, enhancements, and an incredible lineup of new content! The program now sports a sleek, modern GUI redesign across the entire interface, including updated toolbars, refreshed windows, smoother workflows, a new dark mode option, and more. The brand-new side toolbar provides quicker access to key windows, while the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, creating a flexible, clutter-free workspace. We have an amazing new “AI-Notes” feature. This transcribes polyphonic audio into MIDI so you can view it in notation or play it back as MIDI. You can process an entire track (all pitched instruments and drums) or focus on individual parts like drums, bass, guitars/piano, or vocals. There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
There are over 100 new features in Band-in-a-Box® 2026 for Windows®.
When you order purchase Band-in-a-Box® 2026 before 11:59 PM PST on January 15th, you'll also receive a Free Bonus PAK packed with exciting new add-ons.
Upgrade to Band-in-a-Box® 2026 for Windows® today! Check out the Band-in-a-Box® packages page for all the purchase options available.
Band-in-a-Box 2026 Video: The Newly Designed Piano Roll Window
In this video, we explore the updated Piano Roll, complete with a modernized look and exciting new features. You’ll see new filtering options that make it easy to focus on specific note groups, smoother and more intuitive note entry and editing, and enhanced options for zooming, looping, and more.
Band-in-a-Box 2026 Video: AI Stems & Notes - split polyphonic audio into instruments and transcribe
This video demonstrates how to use the new AI-Notes feature together with the AI-Stems splitter, allowing you to select an audio file and have it separated into individual stems while transcribing each one to its own MIDI track. AI-Notes converts polyphonic audio—either full mixes or individual instruments—into MIDI that you can view in notation or play back instantly.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean