I wanted to build my own pc that would help to render BIAB tunes that I create. Where should I invest the money for the biggest bang for the buck? Processor? Skip graphics card? What should the focus be on?
I build all my computers, and their primary function is for music programs especially including BIAB.
The CPU is very important for regenerating RealTracks. Don’t skimp there.
The graphics card is relatively not very important in digital audio.
I highly recommend a SSD boot drive, and put the BIAB program on it. The RealTracks can stay on the supplied USB drive but if you can give them a separate internal hard drive, I recommend that.
Tougher question: RAM. At this time BIAB is a 32-bit program and itself doesn’t benefit from more than 4 GB. However, if you have large software synths BIAB can use JBridge to access more RAM if you have it.
To prevent RFI, I only use wired mice and keyboards for music, and I keep the router away from the PC.
I am careful not to run power cables in parallel with line level or mic cables.
And we haven’t even talked about an audio/MIDI interface outside the box, decent monitors and a room without lots of square surfaces and windows.
Does this help?
BIAB 2025 Win Audiophile. Software: Studio One 7 Pro, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Presonus 192 & Faderport 8, Royer 121, Slate VSX, Adam Sub8 & Neumann 120 monitors.
That is an option, but unless you are truly a pro (meaning your computer you build is how you are going to make money) let me share with you that I just went out and ordered a Dell. After years of hand building with specs and safeguards that in the long run didn't mean much it was just as easy to buy the Dell. Solid state drives are nice and if I had money and desire I would have SSDs in that computer, but for me the primary advantage is boot speed, and I have no reason to care it it take 4 seconds to boot or 4 minutes. Nothing is that urgent for me. I have an i7 with 64 gigs of RAM and a 2tb storage drive for files. Programs live on C: and data lives on D: with thumb drives just for utility. When I work on music downstairs I move them by network anyway. I have never had any issues with RF from the wireless keyboard but I'll take Matt's word for it if he says he has. In my case I am writing songs nobody will ever hear but me and a handful of people here who bother to listen, so I don't care if the wireless keyboard maybe could might possible potentially emit a spurious bit of noise.
My PC with the RAM upgrades, the second drive and updated video card was $1100. I am so out of touch with that world since retiring from IT that I don't even know (or care) if buillding would have been cheaper, more expensive, or the same.
All depends on you, bro. According to your post you have been a member over 2 years and this is your 10th post. I don't know how much you are into music, if it is your means to make a living, if you play with it for 2 hours a month.... I don't know your skill level with computers, so building may be a challenge to you or it may be second nature. Back when I was a gamer I had a water cooled system because I pushed the front end bus of the fastest AMD processor made then to the limits it could be pushed and it ran so hot you could weld with it. That one also had 64gb of RAM and the best ATI video card. That was like 18-20 years ago though. THAT computer you won't buy at Staples... Now I am retired and lazy and refuse to work on computers ever again.
So ask yourself some questions. Is this a money pit that will sit in a spare room or is it going to make money for you to at the very least pay for itself. That's step one on your decision. I have been to houses bigger than my high school where people had obscene amounts of money and wanted these state of the art computers so they could check their AOL email..... LOL
To build off Eddie, I usually go with Dells too. I've been shopping PCs and laptops with them for over 10 years. I usually shop at the Dell Outlet and buy refurbished machines. They have all the warranties of a brand-new machine but were returned for some reasons or other. The prices can be steeply discounted depending on the models and specs you are looking for. I work in IT as well and could build my own machine too but prefer the challenge of finding a machine already built with the features I want.
Steve, do you know if current Dells have slots to add more hard drives or SSDs, plus power and SATA cables or at least ports for them? That was a serious problem the last time I looked under the hood at one.
BIAB 2025 Win Audiophile. Software: Studio One 7 Pro, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Presonus 192 & Faderport 8, Royer 121, Slate VSX, Adam Sub8 & Neumann 120 monitors.
Hey Matt, my Dell Precision T5400 is an engineering workstation from 2008. I've found better luck with number of power/SATA cables and drive bay on those versus the consumer grade PCs. On the screenshot below you'll find that they separate the good workstations from consumer models with (For Home) or (For Work). I always have gone with the Precisions as I was introduced to them through the office in IT-land. I knew they were bulky and tough workhorses from supporting and maintaining them in the work environment. Of course a Dell Precision Workstation will cost you a bit more than the consumer (home) models but you have an awesome machine for music, video, or whatever challenge you throw at it. The newer version of my machine is the 5810 and 5820. I've got upgrades maxed out on my machine, 32 Gig Ram, Dual Quad Core Xeon processors (8 logical cores) and a beefed up video card. I should still be good for another couple of years before I get a newer machine. I also use this machine to render 4K HD video and flight simulation. Hope that helps!
NP. Once you see what models you may want, then pop over to the Dell Outlet store. Available PCs change on a daily basis. I just saw 2 5810s one loaded with an 8 core processor and the other with a 12 core. Each PC was marked down over 50% from their original price.
Thank very much for the responses everyone. I’m taking notes on all of your comments. You guys confirmed what I was thinking. I do make a living from music and wanted the BIAB program to load faster and render to mp3 faster. I figured it wasn’t the graphics card, but the processor. I do live in Florida so cooling is going to be a factor. I hadn’t considered Dell, but I’ve looked into many YouTube videos on how to build a pc. My laptop is struggling a bit. It’s a refurbished Windows 10 running the latest BIAB. I’m probably looking at the 1,500-2,000 range.
I wanted to build my own pc that would help to render BIAB tunes that I create. Where should I invest the money for the biggest bang for the buck? Processor? Skip graphics card? What should the focus be on?
Thanks!
-Andrew
This is the best way to do home recording.... build or buy a machine that will be dedicated to the music.
I've used both with good results. The important part is to have a really nice USB interface. That's the sound card. You really don't want to try to use the soundcard in the computer.
Most computers today are more than sufficient and powerful enough to do everything you need. Just use a good interface and you'll be just fine.
I have a Dell laptop that I used for several years with a Focusrite interface and it did an amazing job. Later, well, it's been over 10 years ago now, I built a custom DAW with the i5 Intel chip and running XP pro 32bit. That machine is still running rock solid and it now uses the Focusrite interface that was on the Dell. The benefit to the custom build was it didn't come from the factory loaded with bloatware and unnecessary software taking up drive space.
I keep my main DAW totally off the internet. As a result, I don't get surprise updates that screw up my configuration.
But yeah.... I think you'll be fine with either a build or an off the shelf machine. Put the focus on the interface, the speakers you monitor with , and some good software besides PG's fabulous stuff.
You can find my music at: www.herbhartley.com Add nothing that adds nothing to the music. You can make excuses or you can make progress but not both.
The magic you are looking for is in the work you are avoiding.
Band-in-a-Box® 2025 for Mac® users: Build 904 now available!
If you're already using Band-in-a-Box® 2025 for Mac®, make sure to grab the latest update! Build 904 is now available for download and includes the newest additions and enhancements from our team.
PowerTracks 2026 is here—bringing powerful new enhancements designed to make your production workflow faster, smoother, and more intuitive than ever.
The enhanced Mixer now shows Track Type and Instrument icons for instant track recognition, while a new grid option simplifies editing views. Non-floating windows adopt a modern title bar style, replacing the legacy blue bar.
The Master Volume is now applied at the end of the audio chain for consistent levels and full-signal master effects.
Tablature now includes a “Save bends when saving XML” option for improved compatibility with PG Music tools. Plus, you can instantly match all track heights with a simple Ctrl-release after resizing, and Add2 chords from MGU/SGU files are now fully supported... and more!
Get started today—first-time packages start at just $49.
Already using PowerTracks Pro Audio? Upgrade for as little as $29 and enjoy the latest improvements!
Band-in-a-Box 2026 for Windows Special Offers End Tomorrow (January 15th, 2026) at 11:59 PM PST!
Time really is running out! Save up to 50% on Band-in-a-Box® 2026 for Windows® upgrades and receive a FREE Bonus PAK—only when you order by 11:59 PM PST on Thursday, January 15, 2026!
We've added many major new features and new content in a redesigned Band-in-a-Box® 2026 for Windows®!
Version 2026 introduces a modernized GUI redesign across the program, with updated toolbars, refreshed windows, smoother workflows, and a new Dark Mode option. There’s also a new side toolbar for quicker access to commonly used windows, and the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, making it easier to customize your workspace.
Another exciting new addition is the new AI-Notes feature, which can transcribe polyphonic audio into MIDI. You can view the results in notation or play them back as MIDI, and choose whether to process an entire track or focus on specific parts like drums, bass, guitars/piano, or vocals. There's over 100 new features in Band-in-a-Box® 2026 for Windows®.
There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
Upgrade your Band-in-a-Box for Windows to save up to 50% on most Band-in-a-Box® 2026 upgrade packages!
Plus, when you order your Band-in-a-Box® 2026 upgrade during our special, you'll receive a Free Bonus PAK of exciting new add-ons.
If you need any help deciding which package is the best option for you, just let us know. We are here to help!
Band-in-a-Box® 2026 for Windows® Special Offers Extended Until January 15, 2026!
Good news! You still have time to upgrade to the latest version of Band-in-a-Box® for Windows® and save. Our Band-in-a-Box® 2026 for Windows® special now runs through January 15, 2025!
We've packed Band-in-a-Box® 2026 with major new features, enhancements, and an incredible lineup of new content! The program now sports a sleek, modern GUI redesign across the entire interface, including updated toolbars, refreshed windows, smoother workflows, a new dark mode option, and more. The brand-new side toolbar provides quicker access to key windows, while the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, creating a flexible, clutter-free workspace. We have an amazing new “AI-Notes” feature. This transcribes polyphonic audio into MIDI so you can view it in notation or play it back as MIDI. You can process an entire track (all pitched instruments and drums) or focus on individual parts like drums, bass, guitars/piano, or vocals. There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
There are over 100 new features in Band-in-a-Box® 2026 for Windows®.
When you order purchase Band-in-a-Box® 2026 before 11:59 PM PST on January 15th, you'll also receive a Free Bonus PAK packed with exciting new add-ons.
Upgrade to Band-in-a-Box® 2026 for Windows® today! Check out the Band-in-a-Box® packages page for all the purchase options available.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean