Frank,

See if the below helps....

1) Click on #1 and then #2 shown on IMAGE 1 above.

2) Now scroll through the list on the left until you get to the Realtrack whose hold volume you want to adjust (#3, IMAGE 2).

You many need to scroll down a bit to find the Realtrack because MIDI soloists could be at the top of the list.

3) Now click on "Edit" under "Soloist Maker" (#4, IMAGE 2).

4) Click on the "More" button (#5, IMAGE 3) when the Soloist Editor window opens.

5) Double-check that the name of the Realtrack is correct (it's the heading for the new window that opens).

6) Under the 'Normal' column, adjust the values in the boxes I've labelled #6 on IMAGE 3. If you want to make the hold quieter, reduce the value by 1, 2, or 3 decibels. If you want to make the hold louder, increase the value by a decibel or two.

NOTE: There are two values to enter.... one for the 'a' sub-style and one for the 'b' substyle (I suggest just making them both the same.)

7) 'OK' your way back to BIAB and generate the song for the changes to take effect.

This should do the job for you.

Regards,
Noel

MY SONGS...
Audiophile BIAB 2025