There's no need to unfold the song to one linear chorus and copy/paste to mute/unmute the pedal steel track.
To play the 16 measure song 3 times and mute pedal steel on 1 & 3, but ON for loop 2, do the following:

Select Bar one of the 1st chorus
Select Bar Settings using the menu or F5
At the top of the Bar Settings window note the box following beside the words Settings Apply to All Chorus # - It defaults to "All Chorus'"
Use the small triangle to open the drop down window and you see a list of number choruses
Highlight Chorus 1
Select the pedal steel track and select 'Mute'
Highlight Chorus 2
Select the pedal steel track and select 'Back to normal'
Highlight Chorus 3
Select the pedal steel track and select 'Mute'
OK and exit the Bar settings menu

Generate and the following should occur:

Chorus One should play 32 bars with the pedal steel muted.
Chorus Two should play 32 bars with the pedal steel unmuted.
Chorus three should play 32 bars with the pedal steel muted.

Because you first selected Bar One before accessing the Bar Settings, the changes to mute/unmute occur on the first bar of each Chorus.

Last edited by Charlie Fogle; 04/20/18 08:48 AM.
BIAB 2025:RB 2025, Latest builds: Dell Optiplex 7040 Desktop; Windows-10-64 bit, Intel Core i7-6700 3.4GHz CPU and 16 GB Ram Memory.