Created a track in BIAB and then transferred to RB and saved in my RB folder so it saved as a SEQ file. Decided to add a solo track. I can do that in BIAB using the soloist button which gives me some control of where the solo plays.
No such button in RB (or is there?) Decided to generate a RealTracks soloist throughout the whole song and simply delete the bits I didn't want.
Right click track and choose generate etc etc. But only two bars or so were generated over the drum count in and a bit further.
Tried several times then thought laterally. Opened the original BIAB track (SGU not SEQ) and everything worked fine - complete track generated.
I do all my editing etc in PT cos I'm used to it. Saved song with new solo as a seq file, opened in PT, exported the solo to a wav file and then imported to the original seq file which I had done a bit of editing on.
So now the original seq file has a solo. Long and laborious but sounds good.
Two questions.
1) Is there a soloist dialogue in RB I haven't found?
2) Can I only generate a new RealTracks track successfully if I work on a sgu fle not a seq? If that's true then I need to get my RB tracks right before I save them to seq files which seems odd.
Can I overwrite the original BIAB file from RB and not save as a seq?
RB will only generate whatever section is highlighted. So you need to adjust your generation view to be more DAW inspired; work on this track from here to here. That may explain your situation in RB if your From-Thru settings are not selecting the whole track.
You can right-click and Select Whole Track (CTRL+A)
The whole blue track designation also comes into play.
When you open an SGU file, the BB track names turn blue in RB and behave differently. You can change this using Track-Make all tracks regular tracks .. then the tracks behave like DAW tracks where you have to highlight the area you want generated. When they are BiaB tracks they can all generate at once.
One of the differences between RB and BiaB. If you open a SEQ file it'll likely have 'regular tracks' .. but if you open a BiaB file it acts more like BiaB
Make your sound your own! .. I do not work here, but the benefits are still awesome
snip ... Can I overwrite the original BIAB file from RB and not save as a seq?
Yes, you can save a SGU or MGU file as a SGU or MGU file in RealBand. Click on File > Save As ... then select Band-in-a-Box songs from the Save as type drop down menu.
thanks rharv and Jim. all sorted. RB it seems to me either acts an extension to BIAB or a DAW depending on hos its used and unles you make allowances for that you won't get the result you need. just one further question to save me experimenting if i work on a sgu file in RB then save as an sgu file in the original BIAB folder can I overwrite the original BIAB file or not?
I'm pretty sure if you save an SGU from RealBand to the original location of the BIAB file (as long as it's not currently/concurrently open in BIAB, in which case it should be locked), you will definitely overwrite the original file. I would give it a different name, at least initially, to make sure all is working well. They are small files and don't take up much space.
John
Laptop-HP Omen I7 Win11Pro 32GB 2x2TB, 1x4TB SSD Desktop-ASUS-I7 Win10Pro 32GB 2x1.5TB, 2x2TB, 1x4TB SATA
Yes, you can write over a file in the BB directory, but I do not suggest doing this until you fully understand the differences in an RB saved BB file and a BB saved file.
Put simply; RB files saved as BiaB files may lose some data. So it is best practice to keep the original BiaB file (just in case) and save the RB file to a different name. This way you have both for reference. If you later feel comfortable deleting one or the other, fine, but losing work should always be avoided or intentional. At least in my opinion.
Like John mentioned, the BiaB files are pretty small, so think before overwriting them, as there isn't much to lose by keeping them for reference later.
I use a date stamp here in the file name to recognize them.
Example; Biab file may be named SongName.SGU My RB file would then be saved as SongName_RB_180309.SGU .. so I know the source of the file (showing an RB file saved to BB format) and the date I did it .. 180309 would equal YYMMDD (year-month-date) so 180309 = 2018-March-9th.
Just my way of referencing things.
Make your sound your own! .. I do not work here, but the benefits are still awesome
still having trouble when I open a seq file in Real Band. If I want to generate a RealTrack to add a part even if I select the whole track and then choose generate all I get is a few bars. Tried setting the 'from............ to' settings to match the whole track but all i got was two bars again.
I create songs in BIAB and the transfer to RealBAnd and save as a seq file for editing in PT. So I always have the original BIAB file, and opening the original BIAB file in RealBand I can then generate a whole track, export to wav and then reimport to the seq file.
Can I generate a whole track in RealBand when I open a seq file?
I like working with seq files in PT as its a simple program and I'm used to it - without the added bits that RealBand gives me. But sometimes I want to add to a seq file and RealBAnd should be able to do it
If its possible can someone walk me through generating a whole RealTrack in a seq file using RealBand? Please?
I like working with seq files in PT as its a simple program and I'm used to it - without the added bits that RealBand gives me. But sometimes I want to add to a seq file and RealBAnd should be able to do it
Bob, I don't seem to have this problem. PT/RB can trade SEQ files, with each acting as expected. Can you post an example file, maybe in DropBox or something?
Or as a test, try using Save As to make a copy of the SEQ file and see if the copy still misbehaves. If not, something in the original file may have become corrupt. If this is the case, my next suggestion would be to select the whole track (CTRL _ A) and use the Track - Consolidate Track option. This writes the track to one contiguous chunk of data (in case any of the bits get confused by the temp file/chunk settings).
Once you start making edits on a track RB and PT will write the edited 'chunks' as smaller file sections that get read in series; sometimes forcing them to all become one 'chunk' again can fix weird issues like this, especially if a plugin is involved .. and then if this fixes things I'd note the plugin as a possible suspect.
Make your sound your own! .. I do not work here, but the benefits are still awesome
what I'm trying to do is to write a new blank audio track in RB. Works fine with sgu files but won't witha seq filw. Control A doesn't seem to select the whole track and trying the from to setting doesn't seem to either with seq files but does with sgu files
I only quickly scanned the above posts so I may have missed it but I don't recall seeing 'build 5' mentioned. If you don't have this update, it can be obtained from the link below.
2. Are you running RB as administrator? (I'm guessing that you are. If not, though, try this.... close RB, right-click on the RB start-up shortcut and select "Run as administrator" to start the program.)
3. When you go to generate a track are you using the BIAB-reserved tracks (these have track names in blue text) or the non-BIAB tracks (names in black text)?
Although generating works on both types of track, try one of the non-BIAB ones if you've only been experimenting with the BIAB-reserved ones.
4. To select the entire track, try right clicking on the track and selecting "Select whole track" from the menu that pops up.
5. Lastly, does the SEQ file that you're loading into RB have a chord progression saved to it? RB won't be able to generate anything if a chord progression not present.
Apologies if I've covered ground that others have already dealt with.
Obvious question that I have not seen address is if you have EVER been able to do what you want to do and it stopped working or has it never worked? I can't imagine the latest update fixing it if it has never worked, as that is not a listed bug that build 5 fixed, BUT you should do it anyway.
The only thing I would try that has not yet been suggested is to move down 10 like track 12 and try it well away from the rest of the song. If that doesn't help, then send this to support. The code monkeys here are seriously good programmers. If they can't fix it it can't be fixed. They are THAT good.
As they tell me when I complain (too often!) if this was an inherent bug, they would be swamped with reports of it happening. You may need to do a fresh install from square zero. Because it isn't a "crash" type event that creates an error message at a specific memory register in the software they don't have a lot to work with. "Working, but not working right" is so much harder to address than "causing a fatal error" when working with computer code. Then add to that when it is something that is isolated to just one user. I have an issue with undoing a generated part (as opposed to deleting the track) but I seem to be the only one who sees it, so it's the same kind of situation.
I am using the new 1040XTRAEZ form this year. It has just 2 lines.
1. How much did you make in 2023? 2. Send it to us.
1) Is there a soloist dialogue in RB I haven't found?
Not that I'm aware of; you just generate a new track in RB using a realtrack, Soloist is more of a BB term
Quote:
2) Can I only generate a new RealTracks track successfully if I work on a sgu fle not a seq? If that's true then I need to get my RB tracks right before I save them to seq files which seems odd.
No, SEQ files should be able to generate new tracks freely, this is an odd behavior you describe, so getting a copy of the SEQ file would be nice. Have you checked out Dropbox as an upload option? It usually will allow a SEQ size file.. and has free options.
Wish I could help more, but what you describe has been done regularly for years here. Something seems amiss with how you're setup or how you are trying it..
Make your sound your own! .. I do not work here, but the benefits are still awesome
First..... click on an existing track and select WHOLE TRACK.
Now select a new, empty track. It should be highlighted in it's entirety.
Choose the real track SOLO track (vs Rhythm) and let it generate.
Use volume automation and nodes to bring the solo up where you want it and down where you don't. Doing this lets you edit with copy/paste if there's a better solo elsewhere in the song.
You can find my music at: www.herbhartley.com Add nothing that adds nothing to the music. You can make excuses or you can make progress but not both.
The magic you are looking for is in the work you are avoiding.
Which version and build of RealBand are you running? You can find out by clicking on the Help menu, then About RealBand.
I'm wondering what numbers are in the "Start" and "End" boxes in the RealBand toolbar, and exactly where you're clicking to generate these RealTracks.
I can open any SEQ file, whether it started as a BIAB file or not, or even just hit File - New, right-click on an empty track, go to Generate - Select and Generate RealTrack, choose one, and click OK, and the track fills with audio. Does this work on a blank file?
Feel free to send a song file that has this problem to support@pgmusic.com, we'll be happy to check it out. If the file is too big to send as an email attachment, you can upload it to Sendspace or Dropbox, and paste the download link into the email.
Kent from support is likely your best option for a solution.
That said; have you tried right-clicking a track (anywhere) and selecting 'Track- Make all BiaB tracks regular tracks' ?
Just a thought. When a BiaB file is opened in RB the BiaB tracks try to act like BiaB tracks .. but when changed to regular tracks they act more like DAW tracks. Like I said, just a thought. Struck me on the ride home ..
Make your sound your own! .. I do not work here, but the benefits are still awesome
If you've reviewed our Support page, you've probably noticed the Videos page, which separates our Band-in-a-Box® tutorial videos by category: Overview, VST DAW Plugin, Setup, Beginner, Intermediate, Advanced, and there's even an Archive category to go down memory lane... (You'll also find these videos on our YouTube Channel.)
Ci siamo dati da fare e abbiamo aggiunto oltre 50 nuove funzionalità e una straordinaria raccolta di nuovi contenuti, tra cui 222 RealTracks, nuovi RealStyles, MIDI SuperTracks, Instrumental Studies, "Songs with Vocals" Artist Performance Sets, Playable RealTracks Set 3, Playable RealDrums Set 2, due nuovi set di "RealDrums Stems", XPro Styles PAK 6, Xtra Styles PAK 17 e altro ancora!
Band-in-a-Box® 2024 apporte plus de 50 fonctions nouvelles ainsi qu'une importante de contenus nouveaux à savoir : 222 RealTracks, des RealStyles nouveaux, des SuperTracks MIDI, des Etudes d'Instruments, des Prestations d'Artistes, des "Morceaux avec Choeurs", un Set 3 de Tracks Jouables, un Set 2 de RealDrums Jouables, deux nouveaux Sets de "RealDrums Stems", des Styles XPro PAK 6, des Xtra Styles PAK 17 et bien plus encore!
Video: Making a Song with Band-in-a-Box®, ChatGPT, and Synth V
Take your Band-in-a-Box® project to a whole new level when you incorporate ChatGPT and Synth V to add lyrics and vocals to your song!
We wanted to demonstrate how this is done with our video, where we show you how to go from nothing to a finished "radio ready" modern pop song by combining the features of Band-in-a-Box®, ChatGPT, and Synth V!
User Video: Next-Level AI Music Editing with ACE Studio and Band-in-a-Box®
The Bob Doyle Media YouTube channel is known for demonstrating how you can creatively incorporate AI into your projects - from your song projects to avatar building to face swapping, and more!
His latest video, Next-Level AI Music Editing with ACE Studio and Band-in-a-Box, he explains in detail how you can use the Melodist feature in Band-in-a-Box with ACE Studio. Follow along as he goes from "nothing" to "something" with his Band-in-a-Box MIDI Melodist track, using ACE Studio to turn it into a vocal track (or tracks, you'll see) by adding lyrics for those notes that will trigger some amazing AI vocals!
Wir waren fleißig und haben über 50 neue Funktionen und eine erstaunliche Sammlung neuer Inhalte hinzugefügt, darunter 222 RealTracks, neue RealStyles, MIDI SuperTracks, Instrumental Studies, "Songs with Vocals" Artist Performance Sets, abspielbare RealTracks Set 3, abspielbare RealDrums Set 2, zwei neue Sets von "RealDrums Stems", XPro Styles PAK 6, Xtra Styles PAK 17 und mehr!
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.