Hi again
Hope you don't mind me jumping in again.
Well I managed to do just that

I had an Mgu with a midi melody.
I copied that to the soloist track
So 2 identical midi tracks.
I used the plug-in dialogue to insert a separate instance of Kontakt into both the melody and soloist tracks

On the melody track under the plug in tab in the mixer I brought up Kontakt and chose a voice, as this data will be coming from the melody track I chose port A from host channel 4 as the input.

Then the same for the soloist track choosing my other voice in Kontakt but this time
chose port A from host channel 8 to match the soloist tracks output channel.

After that set every 4 bars just for fun to mute one and use the other with F5
Works a treat.

I found this easier than trying to use a multi instrument in Kontakt
But you are limited to the 2 tracks.
Mike


BIAB2021 UltraPlus,AsusN55S1Tbssd, W10/64,Akai EIEpro
Yamaha CVP405,SquireStrat, CoolsoftVMidSynth
Novatation Impulse61 Ctr kbd, Cwalk blab Kontakt

http://mikesmusic.byethost16.com/