Originally Posted By: Mike Head
Hi again
Hope you don't mind me jumping in again.
Well I managed to do just that

I had an Mgu with a midi melody.
I copied that to the soloist track
So 2 identical midi tracks.
I used the plug-in dialogue to insert a separate instance of Kontakt into both the melody and soloist tracks

On the melody track under the plug in tab in the mixer I brought up Kontakt and chose a voice, as this data will be coming from the melody track I chose port A from host channel 4 as the input.

Then the same for the soloist track choosing my other voice in Kontakt but this time
chose port A from host channel 8 to match the soloist tracks output channel.

After that set every 4 bars just for fun to mute one and use the other with F5
Works a treat.

I found this easier than trying to use a multi instrument in Kontakt
But you are limited to the 2 tracks.
Mike
Hi again Mike.. No, I don't mind it at all.. I appreciate it.. Did u try to save it? Because that is the problem. In BiaB, it works, but when saved, it does not. Only the melodist track give the sound in Kontakt. The soloist gives the selected BiaB patch... So must be some setting I overlook if u make it work when saved.... I have done the same as u with the channels. Melody on 4 and solo on 8...

Forever Grateful, BUT, sometimes pissed of. wink
Trygve "Leo" Larsen
BiaB 2020, Windows 8.1, Intel Core i5 CPU, 270GHz, 32 Gb RAM
My OLD tracks on Soundcloud; https://soundcloud.com/trygve-larsen My NEW is unpublished
The Universe = Uni-verse ie one song.