If you will search on this subject under my name (BB for Windows forum) you will find out how to do what you want. Basically, what I do is create my guitar tab line by first making a piano midi file using G cleft piano notation for the entire song. I use Music Time Deluxe for this but you can do this using the BB music editor also, just takes a little longer. Then I open the Guitar fret board and use the notation editor to adjust the position of each note is played on the fretboard to match the positions found in the tabs that I am inputing. If they are my licks then I adjust them to the position I play them. Hope this helps. BB has a very good Tap notation editor, but I still don't know how to put in Bends, hammer ons, and pull offs, etc. If they fix that, then it will be great. Lots of times you can find midi tab files for the song you are interested in on the internet, see Ultimate Guitar Tabs on internet. You can use these midi files to do the same thing as above as long as you know the cords for the song, most of the time they are provided with the tabs. As Peter would say, have fun.