I have really strange problem (with BIAB, not personal) with loading a song that I arranged with BIAB 2017 Everything Pak. Having partly composed the song I saved it for later amendment. However, trying to reload the song failed. What happens is the song appears to load and goes through the loading of instruments etc. and then starts to play. But only the drums play, the bar cursor doesn't move and the program shows "Program Not responding". Also, my mouse is not responding and I cannot open Task Manager and 9/0 times I have to restart my PC. All this only happens with this one song. I can get around it by loading a previous SGU and then open the file in question and everything works OK but not if I try to open the file in the first instance. I have tried to open the file following amendments and re-saving as a different file name, but still no joy and it still locks up. I have also initialised BIAB to default settings, tried MME & ASIO The style I am using is _TBSLZ8R.STY Texas Blues Straight.
This is a pretty unique situation. From what you a describing, you are correct, it seems that there is something in this song file that is not being agreeable.
Something of this nature would be difficult to troubleshoot over the forum here. Can you please send us the project file via email to support@pgmusic.com and we will take a look at it for you.
Thanks!
C-sharp when you cross the street… or you’re going to B-flat.
You could also upload your song file to a service such as the free Dropbox, put it in a public folder, copy the link to it, and post that link here. We can then try the song.
BIAB 2025 Win Audiophile. Software: Studio One 7 Pro, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus 192 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.
I'm having a similar problem with three midi files. These are homemade with a Yamaha PSR-910 where my keyboardist friend played the songs normally by selecting a Yamaha style on the 910, setting the tempo and played the song. Saved it as a midi file. BIAB loads, decodes the chords but when I hit play, the count off begins and the screen grays out prior to the first note playing. Loads and decodes the chords in RB as well but locks up prior to the first note in RB also.
The songs play in Win Media Player.
Next step was to load the song back in BIAB and I muted all the tracks. The song played without freezing but no sound of course. I began to unmute on a per channel basis and Channel 2 was the culprit. I examined the midi events and there are a lot of control commands on that channel at the beginning but they are meaningless to me.
What is odd to me is that I use to own this very Keyboard and I've saved many many midi song files on it with never any corruption errors.
I'll put some files in dropbox and post a link and anyone is welcome to give a look and tryout. Thanks.
EDIT: Here's the Dropbox Link with the midi file, MGX and Seq projects. As I stated, the files load but go to NOT RESPONDING status before any note plays out.
Hi Charlie I have just loaded your midi ITS.MID to the melody track in BIAB and it plays fine. And generates a chord sheet tempo is 169bpm When I look at track 2 ch 2 in Sona The 2 cnt events at the start of the are RPN pitch bend Sensitivity and cnt 5 portamento time. As this is a tenor sax track I would say that they are required for the correct sound Mike
Thanks Mike. It must be something common to my setups in BB and RB. Fortunately, this time it was not necessary to have a midi file of the recording because I was recording the audio performance for my friend. I recently purchased Sampletank Max and wanted to play around a bit. I am able to extract individual channels so I will have some advantage. Thanks again for checking out the files. I'll leave the link up for a while in case others want to check them.
I just tried both versions of Tunica Motel and they loaded and played fine for me.
Just to check, do you have the latest update for BIAB installed (build 520)?
Also, have you tried "Returning to factory settings" -- found under the Options menu? I've often found that when BIAB stops doing something that it used to do, returning to factory settings often helps.
Lastly, I saved Tunic Motel as Tunica Motel 3. It's available at the link below. Does this one load and play for you?
Hi Noel, You refer to Build 520, but that's for BIAB 2018, I am running 2017 Build 471 Yes I have done a factory reset I tried your file from Dropbox and the file wouldn't even play the drums as before. The program just locked up completely (program not responding)
As before, I loaded a previously made .SGU and then loaded the other 2 files and your from Dropbox and they played perfectly.
So the only way I can get them to play is if I load a previous file first and play part of it. Thanks for trying it out anyway.
Also just chose any style without inputting any chords and pressed Play, let it do the count in and stop, then load my suspect files and they play as they should
If you open the file by double-clicking on it, have you tried using the "File | Open" method and then navigating to the song's folder from within BIAB?
As you said before, this is a weird problem.
Something that I'd try is after you have the song generated and playing (when it's the second instance that you mention), try freezing all the tracks and saving. This may allow you to re-open the song without issue.
Cari amici
È stata aggerate la versione in Italiano del programma più amato dagli appassionati di musica, il nostro Band-in-a-Box.
Questo è il link alla nuova versione 2025.
Di seguito i link per scaricare il pacchetti di lingua italiana aggiornati per Band-in-a-Box e RealBand, anche per chi avesse già comprato la nuova versione in inglese.
Band-in-a-Box® 2025 pour Windows est disponible en Français.
Le téléchargement se fait à partir du site PG Music
Pour ceux qui auraient déjà acheté la version 2025 de Band-in-a-Box (et qui donc ont une version anglaise), il est possible de "franciser" cette version avec les patchs suivants:
Band-in-a-Box 2025 für Windows Deutsch ist verfügbar!
Die deutsche Version Band-in-a-Box® 2025 für Windows ist ab sofort verfügbar!
Alle die bereits die englische Version von Band-in-a-Box und RealBand 2024 installiert haben, finden hier die Installationsdateien für das Sprachenupdate:
Update Your Band-in-a-Box® 2025 to Build 1128 for Windows Today!
Already using Band-in-a-Box 2025 for Windows®? Download Build 1128 now from our Support Page to enjoy the latest enhancements and improvements from our team.
Already using RealBand® 2025 for Windows®? Download Build 5 now from our Support Page to ensure you have the latest enhancements and improvements from our team.
PowerTracks Pro Audio 2025 is here! This new version introduces many features, including VST3 support, the ability to load or import a .FLAC file, a reset option for track height in the Tracks window, a taller Timeline on the Notation window toolbar, new freeze buttons in the Tracks window, three toolbar modes (two rows, single row, and none), the improved Select Patch dialog with text-based search and numeric patch display, a new button in the DirectX/VST window to copy an effects group, and more!
First-time packages start at only $49. Already a PowerTracks Pro Audio user? Upgrade for as little as $29!
Video: Summary of the New Band-in-a-Box® App for iOS®
Join Tobin as he takes you on a tour of the new Band-in-a-Box® app for iOS®! Designed for musicians, singer-songwriters, and educators, this powerful tool lets you create, play, and transfer songs effortlessly on your iPhone® or iPad®—anytime, anywhere.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean