Originally Posted By: 2bSolo
Noel,

The problem is in RB. I looked at the drums channel and it is set on 10.

Is there a table that shows what channel each instrument should be on?

Also, I know you are a Reaper user. Do you have annoying problems like this that happen on a regular basis?

Thanks.

2b


The only channel that is set aside is channel 10. It is for drums in most all cases. One exception is Steven Slates SSD4/5. There you can have each drum on a separate channel or all on one channel and you can decide what channel(s).

I use Studio One Pro as my DAW and I virtually always change changes from BiaB's dedicated channels. I use a lot of VSTis and each VSTi track is set to channel one. But it is up to you to decide what channel you want to use.

Many times I will split a MIDI BiaB drum track into individual drum tracks. Each drum or cymbal will be on its own track with its own VSTi but always set to channel 10. You can use any channel but in cases like this I keep all drums/cymbals on channel 10.

I hope this helps.

When you are at the checkout line and they ask if you found everything say "Why, are you hiding stuff?"

64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware