|
Log in to post
|
Print Thread |
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Feb 2001
Posts: 733
Journeyman
|
OP
Journeyman
Joined: Feb 2001
Posts: 733 |
I would like to use Bluetooth for transmitting from my mixer (keyboard plus BIAB tracks) to my home stereo system for casual home use. I have found a couple of Bluetooth transmitters that typically state "Not recommend for streaming live music (while playing guitar, keyboard, electronic drums etc."
Can anyone suggest a Bluetooth transmitter that will do what I want?
Thanks
Tony
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jul 2000
Posts: 27,569
Veteran
|
Veteran
Joined: Jul 2000
Posts: 27,569 |
I have some experience with this. I have a Switchcraft 318BT plugged into my studio mixer, so anyone with an iPhone can pair to it and play back what they want to hear on good speakers.
There are problems, though.
1st, it's mono. It plugs into an XLR jack that supplies power (so no batteries; that's good) which makes it one channel. At least it sums the Left and Right coming from the iPhone.
2nd, it's Bluetooth. As such the range is severely limited. It starts to wink out even when I walk into the hall, with one bedroom wall separating the iPhone and the Switchcraft. Bluetooth specs say 30' but I don't count on more than 10. This Sweetwater ad says 100'. Nope, not even half at best.
Still, it's VERY handy to have this and never worry about it.
https://www.sweetwater.com/store/detail/318BT--switchcraft-audiostix-318bt-xlr-bluetooth-receiver?mrkgcl=28&mrkgadid=1233692239&rkg_id=0&campaigntype=dsa&campaign=aaDSA&adgroup=1233692239:DSA%20-%20Studio%20&%20Recording&placement=google&adpos=1t1&creative=316784071842&device=c&matchtype=b&network=g&gclid=Cj0KCQiAr93gBRDSARIsADvHiOqTbVQ-3y8f0pvZrdi6qJRiX34awrejhcRyvkWj-v7Hc3JHGV6yWyQaAhxVEALw_wcB
BIAB 2026 Win Audiophile. Software: Fender Studio One 8, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Fender Quantom HD8 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Feb 2001
Posts: 733
Journeyman
|
|
OP
Journeyman
Joined: Feb 2001
Posts: 733 |
After posting my question I found several online discussions about using Bluetooth live. It seems that this is just not practical (yet?) because of the inherent latency with Bluetooth.
Tony
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jan 2002
Posts: 7,913
Veteran
|
|
Veteran
Joined: Jan 2002
Posts: 7,913 |
What is it that you want to do - play live keys into the mixer while transmitting the audio to the stereo for monitoring? Audio over wired Ethernet could be a solution for you. https://en.wikipedia.org/wiki/Audio_over_EthernetBluetooth just is not designed for live performance from a latency standpoint. Probably the cheapest solution, however, is to do low power FM transmission in your house. Be careful when picking a transmitter on Amazon. Some for sale there are powerful enough to cause concern with neighbors and even the FCC. https://www.fcc.gov/media/radio/low-power-radio-general-informationhttps://wholehousefmtransmitter.com/
Last edited by rockstar_not; 12/20/18 05:00 PM.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Oct 2017
Posts: 745
Journeyman
|
|
Journeyman
Joined: Oct 2017
Posts: 745 |
It has long been fixed but my church was broadcasting via FM a funeral to the elementary school next door.
...Deb
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Apr 2013
Posts: 8,867
Veteran
|
|
Veteran
Joined: Apr 2013
Posts: 8,867 |
For reliability and distance, FM is still the way to go. There are lots of options and in my opinion and experience, even the cheapest options most times are (or can be made to...) better than Bluetooth. I have used and recommended this device for years. Particularly for Churches in situations like broadcasting to additional buildings like Deb described in her post above. It's not hard to actually get or exceed 300' with the older units I have. These units can also send video but it is not required in order to transmit audio only or to transmit video without audio. They transmit stereo audio. Wavcomm Jr
BIAB 2026:RB 2026, Latest builds: Dell Optiplex 7040 Desktop; Windows-10-64 bit, Intel Core i7-6700 3.4GHz CPU and 16 GB Ram Memory.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Feb 2001
Posts: 733
Journeyman
|
|
OP
Journeyman
Joined: Feb 2001
Posts: 733 |
What is it that you want to do - play live keys into the mixer while transmitting the audio to the stereo for monitoring?
Yes, I want to send the output from my mixer i.e. keyboard plus midi plus Reattracks etc to another room in our house and don't want to run any wires. The request came from my wife who asked me if I could play live music into another room for a Xmas party. We still remember the days when families used to gather round the piano at Xmas! Tony
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Apr 2013
Posts: 8,867
Veteran
|
|
Veteran
Joined: Apr 2013
Posts: 8,867 |
Looks like we provided an overkill solution to your problem. FM is still the way to go since it seems the party won't be around the piano at Christmas but the piano music will be piped to the party.
Success depends on the distance to broadcast. My first try would be a cheap FM Transmitter found in the auto section at WalMart, Target, Best Buy or an Auto Parts store. They are not expensive. Try to get one with a digital tuner. It will come with a cigarette lighter plug to get power in a car. You can connect two Nine Volt batteries in Parallel (+ to + and - to -) which will give you 9 volts but more current before discharging. Tape the plus wire to the tip of the cigarette lighter plug and the minus wire to the metal strip on the side.
This should power the unit for a couple of hours while the party is ongoing. Test it first to be sure! You may have to move the power chord around a bit as that also functions as the transmitter antenna. Set the transmitter tuner on an unused broadcast channel and any radio you want to receive the broadcast to the same channel and you should receive a stereo broadcast signal from the transmitter.
The FM transmitter will have a stereo 1/8" jack. WalMart or any music store sells a 1/8" to RCA converter plug so you should be able to take a line signal from your mixer RCA jacks if it has them. The RCA outputs should be the same audio as your main outputs. If your mixer doesn't have RCA jacks. Take your output signal from an AUX Output rather than the headphone or main output because that will give you a line out. You will mix your output signal using the AUX Send knobs on each channel you want to use rather than your faders.
You can transmit further and your transmitter will broadcast longer if you have a 12 volt battery of some sort. Maybe a lantern battery or car battery.
Last edited by Charlie Fogle; 12/21/18 04:04 PM.
BIAB 2026:RB 2026, Latest builds: Dell Optiplex 7040 Desktop; Windows-10-64 bit, Intel Core i7-6700 3.4GHz CPU and 16 GB Ram Memory.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Feb 2001
Posts: 733
Journeyman
|
|
OP
Journeyman
Joined: Feb 2001
Posts: 733 |
Looks like we provided an overkill solution to your problem. FM is still the way to go since it seems the party won't be around the piano at Christmas but the piano music will be piped to the party.
You can transmit further and your transmitter will broadcast longer if you have a 12 volt battery of some sort. Maybe a lantern battery or car battery. I didn't think about using an FM transmitter. In fact I think I have one lying about somewhere, I will give it a try. I have only used an FM transmitter in a car and seem to remember it was hard to find a clear frequency. Perhaps it is easier in a static situation. For a 12v power supply I will use an old AC/12V 3A DC adapter. Thanks Tony
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Apr 2013
Posts: 8,867
Veteran
|
|
Veteran
Joined: Apr 2013
Posts: 8,867 |
<<< For a 12v power supply I will use an old AC/12V 3A DC adapter. >>>
Be sure to test first. Most adapters create terrible hum and normally have to have circuitry to filter hum and regulate the voltage.
BIAB 2026:RB 2026, Latest builds: Dell Optiplex 7040 Desktop; Windows-10-64 bit, Intel Core i7-6700 3.4GHz CPU and 16 GB Ram Memory.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Feb 2001
Posts: 733
Journeyman
|
|
OP
Journeyman
Joined: Feb 2001
Posts: 733 |
Based on the help in this thread my new FM transmitter set up worked perfectly to transmit 30 feet through one wall from my mixer to an audio receiver. This is the transmitter I used. https://www.amazon.ca/gp/product/B01K4NI9RS/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1I connected the mixer directly to the transmitter from the "control room" outlet. Finding an unused frequency was no problem, perhaps I am lucky in my location. Using a AC/DC adapter to power the transmitter worked perfectly. I did get quite a bit of static initially but managed to eliminate this by repositioning wires. I also discovered that the transmitter needed to be positioned so that there is no human body close to the transmitter inline with the receiver, including my own. Tony
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Apr 2013
Posts: 8,867
Veteran
|
|
Veteran
Joined: Apr 2013
Posts: 8,867 |
Glad it worked out for you. It's a nice looking unit.
BIAB 2026:RB 2026, Latest builds: Dell Optiplex 7040 Desktop; Windows-10-64 bit, Intel Core i7-6700 3.4GHz CPU and 16 GB Ram Memory.
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
XPro & Xtra Styles PAK Sets On Sale Now - Until May 15, 2026!
All of our XPro Styles PAKs and Xtra Styles PAKs are on sale until May 15th, 2026!
It's the perfect time to expand your Band-in-a-Box® style library with XPro and Xtra Styles PAKs. These additional styles for Band-in-a-Box® offer a wide range of genres designed to fit seamlessly into your projects. Each style is professionally arranged and mixed, helping enhance your songs while saving you time.
What are XPro Styles and Xtra Styles PAKs?
XPro Styles PAKs are styles that work with any version (Pro, MegaPAK, UltraPAK, UltraPAK+, or Audiophile Edition) of Band-in-a-Box® 2025 (or higher). XPro Styles PAKS 1-10 includes 1,000 styles!
Xtra Styles PAKs are styles that work with the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box® 2025 (or higher). Xtra Styles PAKs 1-21 includes 3,700 styles (and 35 MIDI styles)!
The XPro & Xtra Styles PAKs are not included in any Band-in-a-Box® package.
The XPro Styles PAKs 1-10 are available for only $29 ea (reg. $49 ea), or get them all in the XPro Styles PAK Bundle for only $149 (reg. $299)! Listen to demos and order now! For Mac or for Windows.
The Xtra Styles PAKs 1-21 are available for only $29 ea (reg. $49 ea), or get them all in the Xtra Styles PAK Bundle for only $199 (reg. $349)! Listen to demos and order now! For Mac or for Windows.
Note: XPro Styles PAKs require Band-in-a-Box® 2025 or higher and are compatible with ANY package, including the Pro, MegaPAK, UltraPAK, UltraPAK+, and Audiophile Edition.
The Xtra Styles require the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box®. (Xtra Styles PAK 19 requires the 2025 or higher UltraPAK, UltraPAK+, or Audiophile Edition. They will not work with the Pro or MegaPAK version as they require the RealTracks included in the UltraPAK, UltraPAK+, or Audiophile Edition.
Supercharge your Band-in-a-Box today with XPro Styles PAKs and Xtra Styles PAK Sets!
Band-in-a-Box 2026 for Mac Videos
With the release of Band-in-a-Box® 2026 for Mac, we’re rolling out a collection of brand-new videos on our YouTube channel. We’ll keep this forum post updated so you can easily find all the latest videos in one convenient spot.
Whether you're exploring new features, checking out the latest RealTracks or Style PAKs, this is your go-to guide for Band-in-a-Box® 2026.
Check out this forum post for "One Stop Shopping" of our Band-in-a-Box® 2026 Mac Videos!
Band-in-a-Box 2026 for Mac is Here!
Band-in-a-Box® 2026 for Mac is here and it is packed with major new features! There’s a new modern look, a GUI redesign to all areas of the program including toolbars, windows, workflow and more. There’s a Multi-view layout for organizing multiple windows. A standout addition is the powerful AI-Notes feature, which uses AI neural-net technology to transcribe polyphonic audio into MIDI—entire mixes or individual instruments—making it easy to study, view, and play parts from any song. And that’s just the beginning—there are over 100 new features in this exciting release.
Along with version 2026, we've released an incredible lineup of new content! There's 202 new RealTracks, brand-new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two new RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
Special Offers
Upgrade to Band-in-a-Box® 2026 for Mac and save up to 50% on most upgrade packages during our special offer—available until May 15, 2026. Visit our Band-in-a-Box® packages page to explore all available upgrade options.
2026 Free Bonus PAK & 49-PAK Add-ons
Our Free Bonus PAK and 49-PAK are loaded with amazing add-ons! The Free Bonus PAK is included with most Band-in-a-Box® 2026 for Mac packages, but you can unlock even more—including 20 unreleased RealTracks—by upgrading to the 2026 49-PAK for just $49.
Holiday Weekend Hours
As we hop into the Easter weekend, here are our holiday hours:
April 3 (Good Friday): 8:00 AM – 4:00 PM PDT
April 4 (Saturday): Closed
April 5 (Easter Sunday): Closed
April 6 (Easter Monday): Open regular hours
Wishing you an egg-cellent weekend!
— Team PG
Update to Build 10 of RealBand® 2026 for Windows®!
If you're already using RealBand 2026 for Windows, download build 10 to get all the latest additions and enhancements.
Band-in-a-Box® 2025 for Mac® users: Build 904 now available!
If you're already using Band-in-a-Box® 2025 for Mac®, make sure to grab the latest update! Build 904 is now available for download and includes the newest additions and enhancements from our team.
Band-in-a-Box® 2026 for Windows® users: Build 1237 is now available!
Already a Band-in-a-Box 2026 for Windows user? Stay up to date and download the build 1237 to get all the latest additions and enhancements.
|
|
|
|
|
|
|
|
|
|
|
|
Forums57
Topics86,204
Posts801,930
Members40,067
| |
Most Online64,515
Apr 8th, 2026
|
|
|
|
|
|
|
|
|
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean