Note the version number of the plugin is not changed, as the fixes were in accessory Files.
Here are the changes for the plugin:
[*]Fixed: (for the VST DAW Plugin) Generating multi-riffs would sometimes generate an error. (tips: make sure to first select a multi-riff before generating. Also, highlight a region of the chordsheet first to generate just that section as a multi-riff)
[*]Added: (for the VST DAW Plugin) Shots, holds, rests, push chords now read in from BB files. [/list]
Note that a frequent cause for people saying the multi riffs didn’t generate is that you need to select a multi riff first. (Via the select button) and the. Press generate. (There was also a sometimes error message that has been fixed too’)
Also for multiriffs the typical use is to highlight a section, for example 4 bars, and then select generate and you will get 7 variations of riffs for those 4 bars. If you don’t highlight a section, you will get 7 variations of the whole song (at least the first chorus). Nothing wrong with doing that, it just isn’t the typical use. Also remember that multi riffs will generate with a single leadin bar because there are often pickup notes in the riff. And there may be an extra bar if there are trailing or decaying notes too. _________________________ Have Fun! Peter Gannon PG Music Inc.
i'm sorry to report that the plugin build 610 does not work any better than build 609 in fact 609 was working even if it was shaky. it did work on new shorter files. I built a new file of 32 bars 1 chorus and while it generated fast, the multiriff (8 bars)locked up on riff 2. it still generated the range check error
Last edited by RobH; 12/28/1806:33 PM.
HP Win 11 12 gig ram, Mac mini Sonoma with 16 gig of ram, BiaB 2025, Realband, Reaper 7, Harrison Mixbus 9 32c , Melodyne 5 editor, Presonus Audiobox 1818VSL, Presonus control app.
Rob, That's an install issue, where it wasn't installing one file. We've fixed the 610 installer, so you can just download it again and install it. After the install, you can verify that c:\bb\bbw4.exe (assuming BB is installed to c:\bb) is dated 12/28/2018. That's a sign the installation was correct.
Rob, That's an install issue, where it wasn't installing one file. We've fixed the 610 installer, so you can just download it again and install it. After the install, you can verify that c:\bb\bbw4.exe (assuming BB is installed to c:\bb) is dated 12/28/2018. That's a sign the installation was correct.
BINGO.... Did not get a chance to do more than a 12 bar song with a 4 bar multi riff but worked like a charm in Ableton. Will put it to a work load tomorrow. Great progress and thanks for the hard work
Thanks rap, Note that this update just addresses two things (multi-riff and shots). There will be a release on Monday that adds more plugin related fixes and features, as well as a 20 minute video on using it with Ableton. we shot that video today, and it worked well in Ableton.
Aawesome Peter I give it a run today I appreciate the effort as we say down here Y’all put into it
HP Win 11 12 gig ram, Mac mini Sonoma with 16 gig of ram, BiaB 2025, Realband, Reaper 7, Harrison Mixbus 9 32c , Melodyne 5 editor, Presonus Audiobox 1818VSL, Presonus control app.
Could you please answer 2 questions below and check directly and confirm with your IT dept/ programmer and let us know. I really appreciate your great customer service.
There are some long threads on another BIAB user list where people are asking these 2 questions below--
1. Has BIAB 2019 program really been totally rewritten as a 64-bit program or did PGM figure out a kludge to wrap the old 32-bit code (or is much of it still 16-bit?) is it some sort of a wrapper so that it interacts with other software as a 64-bit program but internally still 32 bit? Sort of like j-bridge serves as a 64-bit "wrapper" for 32-bit plug-ins so they can be used with 64-bit DAWs.....or has the BIAB 2019 been completely rewritten in native 64 bit code without shortcut wrappers.....question 2 below is associated
2. With the new 2019 BIAB VST feature-- the rendering takes a lot longer in DAW's in both Ableton and Presonus Pro in multiriff mode and in general with the generating. Why does the rendering take a lot longer in the DAW's and why is it faster in the BIAB standalone. Some are saying because BIAB 2019 is not true native 64 bit. I for one as many do-- appreciate fast render times and being able to quickly stay in the creative zone and not have excessive render times.
Thank you for getting the correct answers to us so people will stop speculating and complaining. Your software is awesome but we sure hope the rendering can be faster and need to know the answers from your IT Dept.
It stops a 3rd of the way across when I Generate tracks in both Studio One or Ableton Live. I have tried changing the mapping of directory. still the same. Please Help!!
Everything is all go in the fixing and features being added to BBvst, you just need to hang in there as the end result will be well worth it ! A few things are being done at a time to keep it stable.
If you are stuck while creating your song in the DAW with something not working try this:
1. Save the SGU in BBvst 2. Open RealBand and Ctrl+T 3. Size it to just show the tracks window 4. Open > saved BBvst SGU 5. Generate > All BB Tracks
You can now drag the track number directly into the DAW track/s. In Realband > Options > Preferences > Audio > Audio File Type (set to your DAW sample rate). In Realband > Options > Preferences > General > Click and Drag Midi Tracks to other programs as Midi files..
I was having ~ 30% success rate under Build 609 conditions to get the DAW VST to generate correctly in Cakewalk,sadly no success now under Build 610,with generation hanging at about 75-80% complete and requiring Cakewalk to be crashed out in Task Manager.
...stop press...additionally,the four failed attempts I had this morning to generate a song have also left behind four folders in >C/bb/BBPlugIn/SavedTracks,the combined total filespace used for these is 175Gb! I only noticed this when doing a routine defrag.Currently,the four folders are defying any attempts to change permissions to allow me to delete them.So quite a hit on disc space so far...
I'm sure we'll get there,and when it does work,the results are really pleasing.
Cheers
Neil Cummins Warrington UK
Last edited by NeilC; 12/30/1812:55 AM.
Dell Inspiron 5748 iPad Mini. iRig HD2. BIAB,RB 2019,Cakewalk,Auria Pro,Cubasis,Garageband,Sampletank. Lots of VST,DXi and FabFilter Pro Bundle. Amplitube,BIAS FX. Behringer MS20 Monitors. Several guitars. Always trying to leave the audience wanting less.
I had a similar experience with the VST in Reaper. Seems like 610 is worse than 609...a big step backwards. Isn't there any kind of QA testing platform that would enable the developers to simulate the various environments?
Thanks for the feedback Guichard! Can you please provide a bit more detail on what issues you are experiencing with the plugin? Which tracks are causing errors? Are you able to reproduce the problem every time? As Peter mentioned, build 610 only addressed issues with Multi-Riffs and opening saved shots but there will be another build released this week which may address some of these issues.
Video: Band-in-a-Box® 2025 for Mac®: VST3 Plugin Support
Band-in-a-Box® 2025 for Mac® now includes support for VST3 plugins, alongside VST and AU. Use them with MIDI or audio tracks for even more creative possibilities in your music production.
Band-in-a-Box® 2025 for Macs®: VST3 Plugin Support
Video: Band-in-a-Box® 2025 for Mac®: Using VST3 Plugins
With the release of Band-in-a-Box® 2025 for Mac, we’re rolling out a collection of brand-new videos on our YouTube channel. We’ll also keep this forum post updated so you can easily find all the latest videos in one convenient spot.
From overviews of new features and walkthroughs of the 202 new RealTracks, to highlights of XPro Styles PAK 8, Xtra Styles PAKs 18, the 2025 49-PAK, and in-depth tutorials — you’ll find everything you need to explore what’s new in Band-in-a-Box® 2025.
Band-in-a-Box® 2025 for Mac is here, packed with major new features and an incredible collection of available new content! This includes 202 RealTracks (in Sets 449-467), plus 20 bonus Unreleased RealTracks in the 2025 49-PAK. There are new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 4, two new sets of “RealDrums Stems,” XPro Styles PAK 8, Xtra Styles PAK 19, and more!
Special Offers
Upgrade to Band-in-a-Box® 2025 for Mac with savings of up to 50% on most upgrade packages during our special—available until July 31, 2025! Visit our Band-in-a-Box® packages page for all the purchase options available.
2025 Free Bonus PAK & 49-PAK Add-ons
We've packed our Free Bonus PAK & 49-PAK with some incredible Add-ons! The Free Bonus PAK is automatically included with most Band-in-a-Box® for Mac 2025 packages, but for even more Add-ons (including 20 Unreleased RealTracks!) upgrade to the 2025 49-PAK for only $49. You can see the full lists of items in each package, and listen to demos here.
If you have any questions, feel free to connect with us directly—we’re here to help!
Cari amici
È stata aggerate la versione in Italiano del programma più amato dagli appassionati di musica, il nostro Band-in-a-Box.
Questo è il link alla nuova versione 2025.
Di seguito i link per scaricare il pacchetti di lingua italiana aggiornati per Band-in-a-Box e RealBand, anche per chi avesse già comprato la nuova versione in inglese.
Band-in-a-Box® 2025 pour Windows est disponible en Français.
Le téléchargement se fait à partir du site PG Music
Pour ceux qui auraient déjà acheté la version 2025 de Band-in-a-Box (et qui donc ont une version anglaise), il est possible de "franciser" cette version avec les patchs suivants:
Band-in-a-Box 2025 für Windows Deutsch ist verfügbar!
Die deutsche Version Band-in-a-Box® 2025 für Windows ist ab sofort verfügbar!
Alle die bereits die englische Version von Band-in-a-Box und RealBand 2024 installiert haben, finden hier die Installationsdateien für das Sprachenupdate:
Update Your Band-in-a-Box® 2025 to Build 1128 for Windows Today!
Already using Band-in-a-Box 2025 for Windows®? Download Build 1128 now from our Support Page to enjoy the latest enhancements and improvements from our team.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean