|
Log in to post
|
Print Thread |
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Sep 2007
Posts: 57
Enthusiast
|
OP
Enthusiast
Joined: Sep 2007
Posts: 57 |
Hi Experts,
Would anybody be able to offer up some possible explanations to the following,which is driving me to distraction and spoiling several weeks of work...I'll use bullet points to be as concise as possible..
1.I have a relatively simple 10 track guitar instrumental project in Cakewalk,comprising Bass/Drums/Keys/Strings as RealTracks from BIAB and 6 live guitar stems.
2. All tracks have some EQ and compression applied to get a basic mix I'm happy with.
3. Peak level at the Mix bus during playback is -14.3dB,with all the stems at similar levels with no clipping evident at any point.
4.No evidence of clipping or transient muting is evident during playback of the pre-mixdown version.
5. After mixdown however to a basic 44.1kHz/24Bit .WAV file,I can hear occasional very short term clips/mutes lasting only milliseconds but definitely audible and deleterious to the quality of the piece,despite no clipping evident on the meters and seemingly plenty of headroom.
All the guitar tracks have been "repaired" at some points using Cakewalk's AudioSnap to correct some minor timing errors,and I suspect this may play some part in the problem,as by moving one transient marker from it's corrected position back to it's original location,one of the clips/mutes was removed.
If this is the problem,I have the onerous task of hunting for and repositioning a lot of corrected transients in the six guitar stems.
Does anyone else have any experience of a problem like this after using AudioSnap,or any other proprietary Audio Quantisation tool,and if so why it may be happening?
This is my first experience of using AudioSnap,so wondering if I've made a fundamental error.
The issue is unrelated to any VST plugins applied as I've done several "vanilla" mixdowns with no effects and flat EQ and the problem persists.
Many Thanks,
Neil Cummins
Warrington
UK
Dell Inspiron 5748
iPad Mini.
iRig HD2.
BIAB,RB 2019,Cakewalk,Auria Pro,Cubasis,Garageband,Sampletank.
Lots of VST,DXi and FabFilter Pro Bundle.
Amplitube,BIAS FX.
Behringer MS20 Monitors.
Several guitars.
Always trying to leave the audience wanting less.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jun 2008
Posts: 625
Journeyman
|
|
Journeyman
Joined: Jun 2008
Posts: 625 |
You might try and mute separate tracks and do a mixdown to see if it is a certain track that is causing the problem.A
Also if you have them sub to a buss you can try muting that buss. I have not used Sonar in a while but I believe you can disable all plugins with a button. You certainly have plenty of headroom.
Have you soloed each track and listened all the way through?
Edit: In Studio One Pro I use Audio Bend function which is like what you are using in Sonar. Once you edit a track it is doing this in real time stretching and compressing the audio. This takes some CPU power, it is wise to consolidate or bounce them tracks in case it is causing your computer to struggle. Also you might check your buffer latency setting and try increasing this if you need too.
Brian
Last edited by Brian Hughes; 12/29/18 01:59 PM.
BIAB 2026 Ultrapack- Fender Studio Pro 8, Windows 11, Mac Mini M4 with Logic Pro 11, Melodyne Studio, Luna Pro
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Sep 2007
Posts: 57
Enthusiast
|
|
OP
Enthusiast
Joined: Sep 2007
Posts: 57 |
Thanks for replying Brian.Yes,I solo'ed each track and there's not a hint of the issue I mentioned,which is the annoying part.
I haven't tried specifically freezing the tracks,so this is another angle of attack I can employ.
Let's see.
BR//
Neil
Dell Inspiron 5748
iPad Mini.
iRig HD2.
BIAB,RB 2019,Cakewalk,Auria Pro,Cubasis,Garageband,Sampletank.
Lots of VST,DXi and FabFilter Pro Bundle.
Amplitube,BIAS FX.
Behringer MS20 Monitors.
Several guitars.
Always trying to leave the audience wanting less.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Dec 2003
Posts: 24,267
Veteran
|
|
Veteran
Joined: Dec 2003
Posts: 24,267 |
Neil, soloing one track at a time may not expose the problem. Most audio clipping and distortion comes from gain. Thus your combined tracks may exhibit the problem while individual tracks do not. Here is how I mix.
In the mixer mode turn all volumes to zero. Then bring up the drums followed by the bass then the other tracks one by one. Carefully watch your output master while doing this. If it shows in the red start over.
Your song may not be as loud as you are use to but the clipping and distortion should be gone. Then you can mix master effect in, usually EQ & compression, again carefully watching your master levels. Note some use a pre-master channel for this.
I hope this helps and good luck.
Principal: Your child always causes trouble in school.
Me: My child causes trouble at home, do I ever call you?
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Sep 2007
Posts: 57
Enthusiast
|
|
OP
Enthusiast
Joined: Sep 2007
Posts: 57 |
Thanks Mario....I'll give this a try alongside the track freezing suggested by Brian.
I think the best guess at the moment is that the audio quantising is the culprit,as it's the first time I've used this technique,and as I mentioned,I carefully located the point at which a very audible mute occurred in the master track and narrowed it down to one guitar stem exactly at the point where I had moved an audio transient from it's original location.
When I returned it back to it's original location in time,the issue on the master was removed when this new version was mixed down.
I have another related question which I'm going to start a thread on,on this forum.
Cheers!
Dell Inspiron 5748
iPad Mini.
iRig HD2.
BIAB,RB 2019,Cakewalk,Auria Pro,Cubasis,Garageband,Sampletank.
Lots of VST,DXi and FabFilter Pro Bundle.
Amplitube,BIAS FX.
Behringer MS20 Monitors.
Several guitars.
Always trying to leave the audience wanting less.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Apr 2009
Posts: 10,720
Veteran
|
|
Veteran
Joined: Apr 2009
Posts: 10,720 |
Yep.
I get that from time to time when I run Melodyne. The track looks and sounds good on playback but gets clipped on the render.
So.... to find it..... In CW.... simply freeze or apply the effects to one track at a time. It does the same thing as the render but does it in the tracks where you can now SEE where it's clipped.
It might be coming from the rendering of the multiple tracks at the same time.
The way I get around this in Melodyne is to go to the audio sections that are clipping and use the gain control function in AUDIO dropdown...... lower the original volume by -3dB and do a render. Check it.... undo and drop the gain as needed. Set your resolution and put markers there.... split the track if needed, to apply the gain to a limited area of the track. Look for the quiet areas in the phrasing.
Of course you can also simply envelope it out as well instead of the gain drop render repeat routine.
Anyway, I experimented to see what works and this worked for me on a few tunes. I have not figured out yet what is the root cause of this issue.
You can find my music at: www.herbhartley.comAdd nothing that adds nothing to the music. You can make excuses or you can make progress but not both. The magic you are looking for is in the work you are avoiding.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Aug 2011
Posts: 10,964
Veteran
|
|
Veteran
Joined: Aug 2011
Posts: 10,964 |
Two thoughts: 1) As you sliced tracks to move audio around did you manually or automatically perform cross fades between the start and stop positions of each clip? By default Cakewalk automatically performs a cross fade between clips but that feature can be disabled in settings. 2) Once you complete all edits you need to combine all the audio in a track into one audio file. Highlight a track, move the cursor to the track area, right click and select the "Bounce to Clips" command.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Dec 2016
Posts: 1,173
Expert
|
|
Expert
Joined: Dec 2016
Posts: 1,173 |
In Sonar set your theme to Mercury (I say this because it looks different in Tungsten and I’m not used to it but the same rule applies anyhow).
Go to the mixer panel (Console View). Run the song keeping an on both the little symbol next to the post button in the Pro Channel indicator. Assuming you are using the Pro Channel this should say reasonably green. If you are clipping you’ll get a red glow on the clips. Also keep an eye on the figure at the bottom of the volume indicator. It will show you the actual peak level per channel and or the master channel.
Also make sure that your track outputs are going where they should. It is possible for example to be sending a channel directly to the sound card and not via the Master. If such a track is clipping you might not see it in the mix.
Edit: an afterthought also check any hard panning or extra stereo width. For example it is possible to push cymbals out wide where they can really clip and not be noticed in the daw.
Edit: set your theme to Mercury
Just some thoughts
Tony
Last edited by Teunis; 12/30/18 08:30 PM.
HP i7-4770 16GB 1TB SSD, Win 10 Home,
Focusrite 2i2 3rd Gen, Launchkey 61, Maton CW80, Telecaster, Ovation Elite TX, Yamaha Pacifica 612
BB 2022(912) RB 2022(2), CakeWalk, Reaper 6, Audacity, Melodyne 5 Editor, Izotope Music Production Suite 4.1
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Mar 2004
Posts: 1,753
Expert
|
|
Expert
Joined: Mar 2004
Posts: 1,753 |
Does the noise in your head bother me ?
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Sep 2007
Posts: 57
Enthusiast
|
|
OP
Enthusiast
Joined: Sep 2007
Posts: 57 |
Further thanks to everyone for some great ideas,some of which I had considered but others very novel.
My poor brain is fried yet further now as the problem completely vanished when I mastered to MP3 at 320/High Quality,but still there when .WAV.
Probably worth another thread at another time,in the interim I need to get those user manuals out again!
Happy New Year!
Neil Cummins
Warrington
UK
Dell Inspiron 5748
iPad Mini.
iRig HD2.
BIAB,RB 2019,Cakewalk,Auria Pro,Cubasis,Garageband,Sampletank.
Lots of VST,DXi and FabFilter Pro Bundle.
Amplitube,BIAS FX.
Behringer MS20 Monitors.
Several guitars.
Always trying to leave the audience wanting less.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Aug 2011
Posts: 10,964
Veteran
|
|
Veteran
Joined: Aug 2011
Posts: 10,964 |
Good luck with the Cakewalk by BandLab (CbB) user manual. CbB does not include a pdf file as all documentation is online. The last pdf file published for Sonar was about 1,645 pages! I was going to have an office supply store print out a copy until they told me it would cost almost $40! Two more thoughts, 1) Post the individual wave files online and ask a few people if they can find out what's going on. 2) Download a free wave editor. Import the wave files into the editor. +++ Audacity +++ will have a red highlight wherever as little as one sample tries to be higher than 0dbFS during the import.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Dec 2016
Posts: 1,173
Expert
|
|
Expert
Joined: Dec 2016
Posts: 1,173 |
These days there is not much about in books that I can see. However there is still the odd Sonar X3 book about and it covers more than just the basics. Most of this stuff has not changed all that much. There are some changes you can look up on the web manuals but you’ll get the gist. Learning Cakewalk by BandLab is a big job.
https://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Dmusic-intl-ship&field-keywords=Sonar+X3+power&rh=i%3Amusic-intl-ship%2Ck%3ASonar+X3+power
You might find more on the web look up Scott R Garrigus he had heaps of stuff on getting the best of Sonar.
Just a thought
Tony
HP i7-4770 16GB 1TB SSD, Win 10 Home,
Focusrite 2i2 3rd Gen, Launchkey 61, Maton CW80, Telecaster, Ovation Elite TX, Yamaha Pacifica 612
BB 2022(912) RB 2022(2), CakeWalk, Reaper 6, Audacity, Melodyne 5 Editor, Izotope Music Production Suite 4.1
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Dec 2003
Posts: 24,267
Veteran
|
|
Veteran
Joined: Dec 2003
Posts: 24,267 |
Principal: Your child always causes trouble in school.
Me: My child causes trouble at home, do I ever call you?
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Dec 2016
Posts: 1,173
Expert
|
|
Expert
Joined: Dec 2016
Posts: 1,173 |
HP i7-4770 16GB 1TB SSD, Win 10 Home,
Focusrite 2i2 3rd Gen, Launchkey 61, Maton CW80, Telecaster, Ovation Elite TX, Yamaha Pacifica 612
BB 2022(912) RB 2022(2), CakeWalk, Reaper 6, Audacity, Melodyne 5 Editor, Izotope Music Production Suite 4.1
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box 2026 for Windows Special Offers End Tomorrow (January 15th, 2026) at 11:59 PM PST!
Time really is running out! Save up to 50% on Band-in-a-Box® 2026 for Windows® upgrades and receive a FREE Bonus PAK—only when you order by 11:59 PM PST on Thursday, January 15, 2026!
We've added many major new features and new content in a redesigned Band-in-a-Box® 2026 for Windows®!
Version 2026 introduces a modernized GUI redesign across the program, with updated toolbars, refreshed windows, smoother workflows, and a new Dark Mode option. There’s also a new side toolbar for quicker access to commonly used windows, and the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, making it easier to customize your workspace.
Another exciting new addition is the new AI-Notes feature, which can transcribe polyphonic audio into MIDI. You can view the results in notation or play them back as MIDI, and choose whether to process an entire track or focus on specific parts like drums, bass, guitars/piano, or vocals. There's over 100 new features in Band-in-a-Box® 2026 for Windows®.
There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
Upgrade your Band-in-a-Box for Windows to save up to 50% on most Band-in-a-Box® 2026 upgrade packages!
Plus, when you order your Band-in-a-Box® 2026 upgrade during our special, you'll receive a Free Bonus PAK of exciting new add-ons.
If you need any help deciding which package is the best option for you, just let us know. We are here to help!
Band-in-a-Box® 2026 for Windows® Special Offers Extended Until January 15, 2026!
Good news! You still have time to upgrade to the latest version of Band-in-a-Box® for Windows® and save. Our Band-in-a-Box® 2026 for Windows® special now runs through January 15, 2025!
We've packed Band-in-a-Box® 2026 with major new features, enhancements, and an incredible lineup of new content! The program now sports a sleek, modern GUI redesign across the entire interface, including updated toolbars, refreshed windows, smoother workflows, a new dark mode option, and more. The brand-new side toolbar provides quicker access to key windows, while the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, creating a flexible, clutter-free workspace. We have an amazing new “AI-Notes” feature. This transcribes polyphonic audio into MIDI so you can view it in notation or play it back as MIDI. You can process an entire track (all pitched instruments and drums) or focus on individual parts like drums, bass, guitars/piano, or vocals. There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
There are over 100 new features in Band-in-a-Box® 2026 for Windows®.
When you order purchase Band-in-a-Box® 2026 before 11:59 PM PST on January 15th, you'll also receive a Free Bonus PAK packed with exciting new add-ons.
Upgrade to Band-in-a-Box® 2026 for Windows® today! Check out the Band-in-a-Box® packages page for all the purchase options available.
Happy New Year!
Thank you for being part of the Band-in-a-Box® community.
Wishing you and yours a very happy 2026—Happy New Year from all of us at PG Music!
Season's Greetings!
Wishing everyone a happy, healthy holiday season—thanks for being part of our community!
The office will be closed for Christmas Day, but we will be back on Boxing Day (Dec 26th) at 6:00am PST.
Team PG
Band-in-a-Box 2026 Video: The Newly Designed Piano Roll Window
In this video, we explore the updated Piano Roll, complete with a modernized look and exciting new features. You’ll see new filtering options that make it easy to focus on specific note groups, smoother and more intuitive note entry and editing, and enhanced options for zooming, looping, and more.
Watch the video.
You can see all the 2026 videos on our forum!
Band-in-a-Box 2026 Video: AI Stems & Notes - split polyphonic audio into instruments and transcribe
This video demonstrates how to use the new AI-Notes feature together with the AI-Stems splitter, allowing you to select an audio file and have it separated into individual stems while transcribing each one to its own MIDI track. AI-Notes converts polyphonic audio—either full mixes or individual instruments—into MIDI that you can view in notation or play back instantly.
Watch the video.
You can see all the 2026 videos on our forum!
Bonus PAK and 49-PAK for Band-in-a-Box® 2026 for Windows®
With your version 2026 for Windows Pro, MegaPAK, UltraPAK, UltraPAK+, Audiophile Edition or PlusPAK purchase, we'll include a Bonus PAK full of great new Add-ons for FREE! Or upgrade to the 2026 49-PAK for only $49 to receive even more NEW Add-ons including 20 additional RealTracks!
These PAKs are loaded with additional add-ons to supercharge your Band-in-a-Box®!
This Free Bonus PAK includes:
- The 2026 RealCombos Booster PAK:
-For Pro customers, this includes 27 new RealTracks and 23 new RealStyles.
-For MegaPAK customers, this includes 25 new RealTracks and 23 new RealStyles.
-For UltraPAK customers, this includes 12 new RealStyles.
- MIDI Styles Set 92: Look Ma! More MIDI 15: Latin Jazz
- MIDI SuperTracks Set 46: Piano & Organ
- Instrumental Studies Set 24: Groovin' Blues Soloing
- Artist Performance Set 19: Songs with Vocals 9
- Playable RealTracks Set 5
- RealDrums Stems Set 9: Cool Brushes
- SynthMaster Sounds Set 1 (with audio demos)
- Android Band-in-a-Box® App (included)
Looking for more great add-ons, then upgrade to the 2026 49-PAK for just $49 and you'll get:
- 20 Bonus Unreleased RealTracks and RealDrums with 20 RealStyle.
- FLAC Files (lossless audio files) for the 20 Bonus Unreleased RealTracks and RealDrums
- MIDI Styles Set 93: Look Ma! More MIDI 16: SynthMaster
- MIDI SuperTracks Set 47: More SynthMaster
- Instrumental Studies 25 - Soul Jazz Guitar Soloing
- Artist Performance Set 20: Songs with Vocals 10
- RealDrums Stems Set 10: Groovin' Sticks
- SynthMaster Sounds & Styles Set 2 (sounds & styles with audio demos)
Learn more about the Bonus PAKs for Band-in-a-Box® 2026 for Windows®!
|
|
|
|
|
|
|
|
|
|
|
|
Forums57
Topics85,705
Posts795,104
Members39,937
| |
Most Online25,754
Jan 24th, 2025
|
|
|
|
|
|
|
|
|
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean