Do not run anything as admin.

Just do these exact steps:

Step 1. Open the stand-alone plugin version. To do this, open your Band-in-a-Box folder (bb) and go to BBPlugin\Files. Double-click on "Band-in-a-Box DAW Plugin Stand-alone.exe".

Step 2. Click File | New to make sure you have a new session. Then choose a style. To do this click on the Style button and click on Select Style. After a few seconds the StylePicker opens. Click on the style _12STACM. Press OK.

Step 3. Press the Generate button and wait. It should take about one minute. When it's finished, you should see a yellow message box that has the words "render complete" on it, and the progress bar will stop moving and reset back to the left.

At this point you have generated a "song" which is just a C chord played by the style _12STACM, consisting of five RealTracks instrument tracks. When you press the Play button at the top of the stand-alone plugin window, you should hear it play. ...

Question 1: Do you hear it play?


Look in the BBplugin/SavedTracks folder, look for a subfolder that has the latest timestamp. It should be dated when you generated the track. It should have a name that looks something like this: 2019-1-7, 16-56-58. Open this folder. You should see 10 files - some wave, some MIDI files.

Question 2: Do you see these files?

In the Band-in-a-Box plugin, the tracks should have a little green waveform icon in the green boxes to the left of them, and four of them also have a little yellow "note" icon to the right. The waveform indicates audio data is available for that tack, and the note tells you there is MIDI data available (RealCharts).




Andrew
PG Music Inc.