Hi I just got a Roland VR-09. Got it connected to my pc via the usb cable. The output into power tracks is always a piano sound. Wondering if anyone is using a VR-09, and how to get the correct sound out? Thanks Jeff
If you are using the USB as a MIDI cable, then the VR-09 is sending only MIDI data to the computer. Therefore the computer is setting/generating the sound being used.
Many times this is because the hardware synth (VR-09) is sending the MIDI Out data on MIDI channel 1, and the computer is routing the MIDI data on channel 1 to a Piano. This is a normal default setting.
The solution would likely involve either a. setting the send channel from the hardware synth to a different MIDI channel that the computer assigns to a different instrument b. Setting the computer to use a different sound for MIDI channel 1 (inside the softsynth being used). For multi-timbral softsynths (like GM syths) you can usually assign a given MIDI channel to a desired sound.
When using MIDI, no actual sound goes from the hardware synth to the computer (only MIDI data that the computer uses to generate sound).
If you instead use the Audio connection from the VR-09 to the computer you can record the audio sound from the hardware synth to the computer (as audio).
There are ways to route the MIDI into the computer back to go back out to the hardware synth, but then you may need a way to listen to both audio outputs at the same time (some sort of mixer).
HTH
I do not work here, but the benefits are still awesome Make your sound your own!
Please explain your setup; MIDI Out of keyboard goes to computer? Sound (audio) out of computer is what you hear?
How is your keyboard connected, and what is the path of the actual sound (audio) that you hear? Is the Keyboard connected to the computer via USB, and your monitors (whether headphones/speakers) comes through the computer .. or?
There are lots of places this signal flow could change direction, so we need to know the specifics to help. Do you hear a piano only while actually playing the keyboard, or does it also happen after you record a track and play it back?
Lots of questions, and knowing how things are wired will help others to give accurate suggestions.
Last edited by rharv; 01/08/1902:48 PM.
I do not work here, but the benefits are still awesome Make your sound your own!
Hi Here is my setup . Using a usb cable from the Roland to my computer. I listen via headphones plugged into the computer . So what I am hearing is a piano, doesn’t matter what I have the Roland set for. If I record, and then listen to that, it is the same piano sound.
Pasted below is what Roland told me. Thanks for the help, Jeff
From Roland:
MIDI does not carry any sounds - it is a control message only, so it sounds like you are triggering a sound that is built into your computer.
If you would like to record the actual sound of the VR-09B into your computer, you will need to instead use an audio interface, which will connect to the main left / right output jacks on the back panel of the VR-09B, and then to a USB port in your computer. Once this is set up, you can create an audio track in your DAW application on your computer, and record the sound of the VR-09B
You have a few choices with a MIDI keyboard (that has its onboard sounds). In that it connects with a USB cable, I'm making the presumption (as with my Casio keyboard) that the connection is both in and out.
So, you can use it as a keyboard input device (so the notes you play on the keyboard get recorded/played back by your computer. However, in that configuration (with the data coming across the USB connection), you have to set up your computer to produce the sound (either via a track in your DAW and a VSTi loaded or a standalone sound module (such as Kontakt or Sampletank standalone), set to receive data from the keyboard.
If you want to hear the actual sounds produced by the keyboard's onboard sound engine, then you need a way to capture the audio out from the back of the keyboard and send that audio back to the computer. That would require a line-in capability from your computer (either via the onboard sound card or an external USB sound card). You have to set up your system to accept the keyboard data in the appropriate direction for the sounds you want.
See the diagram below for my configuration to capture both MIDI and audio data from my keyboards (which needs updating, but the concept is the same):
John
Laptop-HP Omen I7 Win11Pro 32GB 12TB SSD Desktop-ASUS-I7 Win10Pro 32GB 12TB SATA
If you go to Options-Preferences-MIDI devices, you can see what synth is being used, do you have the Re-Route MIDI box checked (top image)?
If so check the synth itself for MIDI channel routing to patch assignments for playback.
Hopefully the images below help. First image is how to assign the default synth, second is how to assign a patch to a given MIDI channel on that default synth. I used the Coyote interface as an example for the second.
I do not work here, but the benefits are still awesome Make your sound your own!
its probably a bit simpler. if you are getting a piano sound then you probably have a recorded midi track and some form of midi synth selected. right click on the track descriptive box and about four or five steps down is the patch change dialogue - choose the instrument you want
If it's like any Roland I have there are two modes. 1. Single ?? for playing a single patch 2. Performance- for using the keyboard as a multitimbral synth. I suspect that's why he only hears piano.
Hi, I can change the instrument. EX, change to Hammond Organ. Now when I play on my Roland, the sound coming through my headphones, connected to the PC is a Hammond organ. But is not the sound that is coming from my Roland. Just is not a piano anymore, not the setting from my Roland. Thanks Jeff
I think we are back to the original discussion of midi or audio. what you are hearing now as a Hammond organ is midi instructions from your roland being played as a hammond by the synth you are using in PT.
to record the sound from your roland that you would hear from the headphone out of the roland you need to connect the audio out to an audio interface like the Behringer U-PHORIA UMC404HD Audio Interface and record the sound not the midi information
midi is just digital ones and zeros which is what you are feeding into PT from your roland
the roland manual shows jacks as the output for audio - from what you describe i think you must be plugging in to the midi out socket which is a din plug
to hear and record the sound of your roland it needs to go into PT the way it would if you were singing into a microphone
Agreed, I don't think your USB connection is capable of sending the audio being played on the Roland to the computer. From Specs: USB COMPUTER port: USB Type B (supports USB MIDI)
Sounds like you want audio not MIDI. Use the audio out connections to the computer.
Weird as it sounds, you may end up needing a different device to take that audio and be able to send it to the computer using USB. I don't think your synth was designed for that.
In your images above, the keyboard is sending MIDI to the computer, and the computer is using the Coyote synth to make the sounds (from that MIDI) that you hear in your headphones connected to the computer. The Coyote does not sound like your synth .. if it did you wouldn't need the synth!
Last edited by rharv; 01/13/1903:29 AM.
I do not work here, but the benefits are still awesome Make your sound your own!
I'm a bit puzzled - what you have coming is a guitar effects processor.............for connecting audio from an audio source like your keyboard what you need is an audio interface like the berhringer unit I mentioned above that turns your audio sound into a digital signal for usb input
Bob, Some of the Line 6 POD's may have USB audio out (HD500X for example); probably not an ideal choice for a way to get the keyboard audio to the computer .. but may actually work. I assume he got one that does what he needs. If he bought a lesser model I agree, he won't find joy.
From https://www.guitarcenter.com/Line-6/POD-HD500X-Guitar-Multi-Effects-Processor-1370873715031.gc?pfm=item_page.rrt1|ClickCP#productDetail "Connect to your computer via USB for multi-channel, studio-quality recording with your favorite DAW software-or tap into POD HD Edit, the free editor/librarian software that makes it easy to tweak and organize all your tones"
Or so it seems. Haven't tried one with PGProducts though. I suppose if you disabled all effects you could use it as an interface .. then again with PGProducts you may need to make sure it can adjust to 16/44. I'd guess it defaults to 24/48. Again, not an ideal choice but maybe doable. (image from Line6 POD HD500X manual)
Last edited by rharv; 01/13/1908:04 AM.
I do not work here, but the benefits are still awesome Make your sound your own!
Band-in-a-Box 2026 for Windows Special Offers End Tomorrow (January 15th, 2026) at 11:59 PM PST!
Time really is running out! Save up to 50% on Band-in-a-Box® 2026 for Windows® upgrades and receive a FREE Bonus PAK—only when you order by 11:59 PM PST on Thursday, January 15, 2026!
We've added many major new features and new content in a redesigned Band-in-a-Box® 2026 for Windows®!
Version 2026 introduces a modernized GUI redesign across the program, with updated toolbars, refreshed windows, smoother workflows, and a new Dark Mode option. There’s also a new side toolbar for quicker access to commonly used windows, and the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, making it easier to customize your workspace.
Another exciting new addition is the new AI-Notes feature, which can transcribe polyphonic audio into MIDI. You can view the results in notation or play them back as MIDI, and choose whether to process an entire track or focus on specific parts like drums, bass, guitars/piano, or vocals. There's over 100 new features in Band-in-a-Box® 2026 for Windows®.
There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
Upgrade your Band-in-a-Box for Windows to save up to 50% on most Band-in-a-Box® 2026 upgrade packages!
Plus, when you order your Band-in-a-Box® 2026 upgrade during our special, you'll receive a Free Bonus PAK of exciting new add-ons.
If you need any help deciding which package is the best option for you, just let us know. We are here to help!
Band-in-a-Box® 2026 for Windows® Special Offers Extended Until January 15, 2026!
Good news! You still have time to upgrade to the latest version of Band-in-a-Box® for Windows® and save. Our Band-in-a-Box® 2026 for Windows® special now runs through January 15, 2025!
We've packed Band-in-a-Box® 2026 with major new features, enhancements, and an incredible lineup of new content! The program now sports a sleek, modern GUI redesign across the entire interface, including updated toolbars, refreshed windows, smoother workflows, a new dark mode option, and more. The brand-new side toolbar provides quicker access to key windows, while the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, creating a flexible, clutter-free workspace. We have an amazing new “AI-Notes” feature. This transcribes polyphonic audio into MIDI so you can view it in notation or play it back as MIDI. You can process an entire track (all pitched instruments and drums) or focus on individual parts like drums, bass, guitars/piano, or vocals. There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
There are over 100 new features in Band-in-a-Box® 2026 for Windows®.
When you order purchase Band-in-a-Box® 2026 before 11:59 PM PST on January 15th, you'll also receive a Free Bonus PAK packed with exciting new add-ons.
Upgrade to Band-in-a-Box® 2026 for Windows® today! Check out the Band-in-a-Box® packages page for all the purchase options available.
Band-in-a-Box 2026 Video: The Newly Designed Piano Roll Window
In this video, we explore the updated Piano Roll, complete with a modernized look and exciting new features. You’ll see new filtering options that make it easy to focus on specific note groups, smoother and more intuitive note entry and editing, and enhanced options for zooming, looping, and more.
Band-in-a-Box 2026 Video: AI Stems & Notes - split polyphonic audio into instruments and transcribe
This video demonstrates how to use the new AI-Notes feature together with the AI-Stems splitter, allowing you to select an audio file and have it separated into individual stems while transcribing each one to its own MIDI track. AI-Notes converts polyphonic audio—either full mixes or individual instruments—into MIDI that you can view in notation or play back instantly.
Bonus PAK and 49-PAK for Band-in-a-Box® 2026 for Windows®
With your version 2026 for Windows Pro, MegaPAK, UltraPAK, UltraPAK+, Audiophile Edition or PlusPAK purchase, we'll include a Bonus PAK full of great new Add-ons for FREE! Or upgrade to the 2026 49-PAK for only $49 to receive even more NEW Add-ons including 20 additional RealTracks!
These PAKs are loaded with additional add-ons to supercharge your Band-in-a-Box®!
This Free Bonus PAK includes:
The 2026 RealCombos Booster PAK:
-For Pro customers, this includes 27 new RealTracks and 23 new RealStyles.
-For MegaPAK customers, this includes 25 new RealTracks and 23 new RealStyles.
-For UltraPAK customers, this includes 12 new RealStyles.
MIDI Styles Set 92: Look Ma! More MIDI 15: Latin Jazz
MIDI SuperTracks Set 46: Piano & Organ
Instrumental Studies Set 24: Groovin' Blues Soloing
Artist Performance Set 19: Songs with Vocals 9
Playable RealTracks Set 5
RealDrums Stems Set 9: Cool Brushes
SynthMaster Sounds Set 1 (with audio demos)
Android Band-in-a-Box® App (included)
Looking for more great add-ons, then upgrade to the 2026 49-PAK for just $49 and you'll get:
20 Bonus Unreleased RealTracks and RealDrums with 20 RealStyle.
FLAC Files (lossless audio files) for the 20 Bonus Unreleased RealTracks and RealDrums
MIDI Styles Set 93: Look Ma! More MIDI 16: SynthMaster
MIDI SuperTracks Set 47: More SynthMaster
Instrumental Studies 25 - Soul Jazz Guitar Soloing
Artist Performance Set 20: Songs with Vocals 10
RealDrums Stems Set 10: Groovin' Sticks
SynthMaster Sounds & Styles Set 2 (sounds & styles with audio demos)
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean