<<< Is there a universal simple setting that would separate two things (BIAB mixer / Halion mixer) into independent sources for future songs? >>>
Not setting but setup, yes. Use the BIAB VST/Halion VST into a DAW and port each track from each VST individually to a track and output to your interface. You could also accomplish the same with a digital mixer with a multitrack interface. The Behringer XR18 would give you 18/18 in/outs for $500. Each track would be independently controlled by its software and you'd control the outputs, Fx's, levels, panning, mixing and routing with the mixer. Similar results can be obtained from a Control Surface such as the Behringer XTouch but you'd still need a separate audio interface to control everything.
Charlie, Thank you. this is not about porting to DAW or controlling them in sense "riding" things in live studio rig. I want to audition select realtracks and compare with midi tracks from imported midi side by side, before rendering tons of wavs, going back and forth between programs.
As I mentioned, it is possible in BIAB (tested!) but very cumbersome. The logical and smart thing would be to open up BIAB mixer to make it more versatile for real tracks and midi.
If this happens, the simplest way would be assign one stereo mixer track as a BUS for monitoring things that come from VST. Get the sound you are after and then render/export to individual wav files to do the mixing in DAW in one step.
I think it is a better approach than involving hardware or exporting huge amounts of data per song just for auditioning purposes. I guess if it is not there, it is a valid item for feature request.
<<< I think it is a better approach than involving hardware or exporting huge amounts of data per song just for auditioning purposes. >>>
I agree. Although the mixer is a one stop hub, in my case, it takes a lot of real estate and is not a permanent fixture in my studio making set up and tear down along with space, so it's not used very often. The situation would be the opposite in a permanent installation.
The mixer is not source dependent and audition options are one, the other, both are neither, all without any latency issues. A good mixer with good Fx would also expand your opportunities to test Fx's side by side without any additional set up. I was looking at your particular issue in the same light as Noel96.
I believe the present limitation is Band-in-a-Box is limited to one midi port and 12 of the 16 channels are assigned.
One solution would be to add multiple midi port capability to the program. Even if one midi port is added all the present midi port one channel assignments could be maintained internal to the program while opening the remaining midi port one channel assignments and an additional 16 channel assignments on midi port two.
Pipeline uses utility programs to accomplish his goals but having multiple midi port capability built-in is a much more elegant solution than creating workarounds.
Another solution would be to have an A/B switch for the one MIDI port BiaB has now. The default could be A, as it it now, and B would be all 16 channels open for MIDI, MST, Rts, RDs or any combination of them to be used at the users discretion.
I'm in a fitness protection program. I'm been hiding from exercise.
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
Quote: "Even if one midi port is added all the present midi port one channel assignments could be maintained internal to the program while opening the remaining midi port one channel assignments and an additional 16 channel assignments on midi port two."
If I understood you correctly, that one extra port, I assume visually an extra mixer channel? That would act as independent midi bus, hosting 16 MIDI channels from VST or such?
P.S. Oh, how I wish this would be a two way communication with developers. If I am not mistaken similar feature(s), (of opening mixer) were requested for years. Not sure what is keeping developers from engaging in conversation?
Was just thinking about you while I was typing previous message! I remember you had good idea about this, but could not remember what exactly you proposed
I think the BIG question is how to get developers involved? Send them Flowers? Chocolate? Beg? Explain? Demand?
Ideally Options > Preferences (Ctrl + E) > MIDI Options > MIDI Settings could be expanded to include a second button called MIDI Port Settings.
MIDI Port Settings would have 20 MIDI channel settings to reflect the four midi channels not used in the default port and the 16 new MIDI port channels. Change the original port MIDI channels from their defaults and the selections available in the MIDI Port Settings four default port midi channel number selections should reflect whatever unused channels remain.
The twenty MIDI channel settings would be assigned to internal and external connections that would includes: 1) 8 permanent mixer channels, 2) 8 floating mixer channels, 3) available USB ports, 4) User defined A, 5) User defined B.
Mario,
Emulating a hardware A / B switch is innovative but limiting. As you described A / B switch emulation it would allow MIDI use within BiaB or direct all MIDI data outside of BiaB. That all or nothing approach eliminates any hybrid options like use of a VSTi in one or more tracks while also using external hardware.
I don't know how easy or difficult adding additional midi port capability is but other softwares
Was just thinking about you while I was typing previous message! I remember you had good idea about this, but could not remember what exactly you proposed
I think the BIG question is how to get developers involved? Send them Flowers? Chocolate? Beg? Explain? Demand?
I have been requesting that PGMusic open up all 16 MIDI channels for years.
I'm in a fitness protection program. I'm been hiding from exercise.
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
Wishes, wishes... Here is my amateur drawing of what would work for me. 16 channels about 9 dedicated for RT/RD (that can be also substituted for MIDI) I think PG limited number of these, because by design (at time it was designed) average computers would not have pulled more, or they would suffer. I think expanding it to about 9 possible simultaneous RT/RD channels should not cause significant pain to render.
And a secondary, independent midi bus, which would not re-assign channels and all settings (volumes/ FX etc.) would happen within VST, only to have master volume be available as control from BIAB mixer.
I know you that you and Realband are not good friends and that's a shame really because what you describe above can be done in Realband without too much effort.
Realband combines all the backing creation and generation ability of BIAB and adds to that some DAW capabilities. It also allows for 48 tracks that can be either MIDI or audio.
Misha, you're essentially asking for what we have all be requesting for too many years to remember. Noel's tip about RealBand will pretty much deliver that now. Or... you can wait...
BIAB & RB2026 Win.(Audiophile), Windows 10 Professional & Windows 11, Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors
Misha, I think that in the early days of BiaB GM was the biggest thing to hit the music world. (Note that GM is General MIDI and not General Motors ) People were very happy to just put a song into BiaB, do some harmonies and/or play a MIDI guitar controller and come out with good results; good results being based on that era. They could also DL a song from the Internet and have it play. Those were big things back then and people did not have to worry about assigning channel numbers, picking VSTis, etc.
But in today's MIDI world that has all changed. People have learned how to do those things. With the advent of much better sound sources like Kontakt, SampleTank, UVI, and other VSTis that contain many layers of sounds GM went mostly by the way side. GM is still around but it is not as dominant as it was back then.
PGMusic is moving in that direction IMHO. With first HQ sounds, then SFZ, and jBridge and now a 64 bit and a VSTi, although still a work in progress, things are moving fast toward today's MIDI situation.
I still advocate for an A/B switch for MIDI channels with A being as it is today and B opening up all 16 channels for user discretion. YMMV
I'm in a fitness protection program. I'm been hiding from exercise.
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
Noel, Videotrack, Mario Thank you for your replies!
Mario, I was thinking about what Jim said a few posts above and your idea of A/B switch. It seems Jim's idea is more universal. If lets say one more "universal" independent midi track is opened on the mixer that can host entire VST without "stealing" channels, that should solve A/B switch, but in a different way. Because in theory, you should be able to use your VST as an independent mixer and have as many channels as you wish, layering styles etc and they would not interfere with 7 channels that are internal to BIAB.
To make this happen, in my opinion, does not require much. As it is all there, but not logical. BIAB renders tracks from VST + BIAB, so even that is solved...
Or am I missing something?
P.S. I wish people who are interested in this would come to a consensus of something universal for different tasks and appeal to Peter Gannon directly with a worked out, balanced solution. A joined, detailed proposal / request from full time loyal supporters.
I guess, no one interested in my proposal... Of jointly figuring what would be a (more or less) universal approach and apealing this as a group...
obviously did not work for years the way it was requested...
A old joke comes to mind...
A guy is casting a fishing rod and a loud voice from above rattles the air: -There's no fish here!!! Guy looks at the sky and asks: -God, is that you? Voice says: No, I am the manager of this swimming pool!
In any case, I think asking for this jointly, with a worked out solution might bring more fruit than individual requests.
I haven't read all the posts as it's so long. But I did download your BIAB ARRANGER.MGX and had a quick look, the Arranger midi tracks was a bit late and needed moving forward.
If you want to bring a lot of midi tracks into BB use energyXT Vst
pipeline, thank you for testing! It seems that some of these midi files from vArranger have issues. But most are ok and are usable in BIAB. I accidentally turned this post another topic.... of having more channels on the mixer. Particularly in my case, an independent midi channel / bus would be very useful, which would let use VST as independent mixer. Essentially adding as many channels/ layers as your hardware would allow without interfering with real tracks or the mixer of the BIAB except maybe controlling VST master volume from BIAB mixer on that "independent" midi track.
I want to persuade people who are interested, to have a discussion and come up with something that would suit most and appeal as a group request to see if that will work. To my understanding similar individual "requests" were asked for years without success.
... an independent midi channel / bus would be very useful, which would let use VST as independent mixer. Essentially adding as many channels/ layers as your hardware would allow without interfering with real tracks or the mixer of the BIAB except maybe controlling VST master volume from BIAB mixer on that "independent" midi track.
Have you tried MiniHost you can load it in the BB audio track or a midi track. You can then load energyXTvst with a 64 bridging file and have a lot of midi tracks that send out to Kontakt.
Band-in-a-Box 2026 Video: AI Stems & Notes - split polyphonic audio into instruments and transcribe
This video demonstrates how to use the new AI-Notes feature together with the AI-Stems splitter, allowing you to select an audio file and have it separated into individual stems while transcribing each one to its own MIDI track. AI-Notes converts polyphonic audio—either full mixes or individual instruments—into MIDI that you can view in notation or play back instantly.
Bonus PAK and 49-PAK for Band-in-a-Box® 2026 for Windows®
With your version 2026 for Windows Pro, MegaPAK, UltraPAK, UltraPAK+, Audiophile Edition or PlusPAK purchase, we'll include a Bonus PAK full of great new Add-ons for FREE! Or upgrade to the 2026 49-PAK for only $49 to receive even more NEW Add-ons including 20 additional RealTracks!
These PAKs are loaded with additional add-ons to supercharge your Band-in-a-Box®!
This Free Bonus PAK includes:
The 2026 RealCombos Booster PAK:
-For Pro customers, this includes 27 new RealTracks and 23 new RealStyles.
-For MegaPAK customers, this includes 25 new RealTracks and 23 new RealStyles.
-For UltraPAK customers, this includes 12 new RealStyles.
MIDI Styles Set 92: Look Ma! More MIDI 15: Latin Jazz
MIDI SuperTracks Set 46: Piano & Organ
Instrumental Studies Set 24: Groovin' Blues Soloing
Artist Performance Set 19: Songs with Vocals 9
Playable RealTracks Set 5
RealDrums Stems Set 9: Cool Brushes
SynthMaster Sounds Set 1 (with audio demos)
Android Band-in-a-Box® App (included)
Looking for more great add-ons, then upgrade to the 2026 49-PAK for just $49 and you'll get:
20 Bonus Unreleased RealTracks and RealDrums with 20 RealStyle.
FLAC Files (lossless audio files) for the 20 Bonus Unreleased RealTracks and RealDrums
MIDI Styles Set 93: Look Ma! More MIDI 16: SynthMaster
MIDI SuperTracks Set 47: More SynthMaster
Instrumental Studies 25 - Soul Jazz Guitar Soloing
Artist Performance Set 20: Songs with Vocals 10
RealDrums Stems Set 10: Groovin' Sticks
SynthMaster Sounds & Styles Set 2 (sounds & styles with audio demos)
Join Tobin as he takes you on a tour of the new user interface in Band-in-a-Box® 2026 for Windows®! This modern GUI redesign offers a sleek new look with updated toolbars, refreshed windows, and a smoother workflow. The brand-new side toolbar puts track selection, the MultiPicker Library, and other essential tools right at your fingertips. Plus, our upgraded Multi-View lets you layer multiple windows without overlap, giving you a highly flexible workspace. Many windows—including Tracks, Piano Roll, and more—have been redesigned for improved usability and a cleaner, more intuitive interface, and more!
Introducing XPro Styles PAK 10 – Now Available for Windows Band-in-a-Box 2025 and Higher!
We've just released XPro Styles PAK 10 for Windows & Mac Band-in-a-Box version 2025 (and higher) with 100 brand new RealStyles, plus 28 RealTracks and RealDrums!
Few things are certain in life: death, taxes, and a brand spankin’ new XPro Styles PAK! In this, the 10th edition of our XPro Styles PAK series, we’ve got 100 styles coming your way! We have the classic 25 styles each from the rock & pop, jazz, and country genres, and rounding out this volume's wildcard slot is 25 styles in the Praise & Worship genre! A wide spanning genre, you can find everything from rock, folk, country, and more underneath its umbrella. The included 28 RealTracks and RealDrums can be used with any Band-in-a-Box® 2026 (and higher) package.
Here’s just a small sampling of what you can look forward to in XPro Styles PAK 10: Soft indie folk worship songs, bumpin’ country boogies, gospel praise breaks, hard rockin’ pop, funky disco grooves, smooth Latin jazz pop, bossa nova fusion, western swing, alternative hip-hop, cool country funk, and much more!
Special offers until December 31st, 2025!
All the XPro Styles PAKs 1 - 10 are on sale for only $29 ea (Reg. $49 ea), or get them all in the XPro Styles PAK Bundle for only $149 (reg. $299)! Order now!
XPro Styles PAKs require Band-in-a-Box® 2025 or higher and are compatible with ANY package, including the Pro, MegaPAK, UltraPAK, UltraPAK+, and Audiophile Edition.
Introducing Xtra Styles PAK 21 – Now Available for Windows Band-in-a-Box 2025 and Higher!
Xtra Styles PAK 21 for Windows & Mac Band-in-a-Box version 2025 (and higher) is here with 200 brand new RealStyles!
We're excited to bring you our latest Xtra Styles PAK installment—the all new Xtra Styles PAK 21 for Band-in-a-Box version 2025 (and higher)!
Rejoice, one and all, for Xtra Styles PAK 21 for Band-in-a-Box® is here! We’re serving up 200 brand spankin’ new styles to delight your musical taste buds! The first three courses are the classics you’ve come to know and love, including offerings from the rock & pop, jazz, and country genres, but, not to be outdone, this year’s fourth course is bro country! A wide ranging genre, you can find everything from hip-hop, uptempo outlaw country, hard hitting rock, funk, and even electronica, all with that familiar bro country flair. The dinner bell has been rung, pickup up Xtra Styles PAK 21 today!
In this PAK you’ll discover: Energetic folk rock, raucous train beats, fast country boogies, acid jazz grooves, laid-back funky jams, a bevy of breezy jazz waltzes, calm electro funk, indie synth pop, industrial synth metal, and more bro country than could possibly fit in the back of a pickup truck!
Special offers until December 31st, 2025!
All the Xtra Styles PAKs 1 - 21 are on special for only $29 each (reg $49), or get all 21 PAKs for $199 (reg $399)! Order now!
Note: The Xtra Styles require the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box®. (Xtra Styles PAK 21 requires the 2025 or higher UltraPAK, UltraPAK+, or Audiophile Edition. They will not work with the Pro or MegaPAK version because they need the RealTracks from the UltraPAK, UltraPAK+, or Audiophile Edition.
Introducing XPro Styles PAK 10 – Now Available for Mac Band-in-a-Box 2025 and Higher!
We've just released XPro Styles PAK 10 for Mac & Windows Band-in-a-Box version 2025 (and higher) with 100 brand new RealStyles, plus 28 RealTracks and RealDrums!
Few things are certain in life: death, taxes, and a brand spankin’ new XPro Styles PAK! In this, the 10th edition of our XPro Styles PAK series, we’ve got 100 styles coming your way! We have the classic 25 styles each from the rock & pop, jazz, and country genres, and rounding out this volume's wildcard slot is 25 styles in the Praise & Worship genre! A wide spanning genre, you can find everything from rock, folk, country, and more underneath its umbrella. The included 28 RealTracks and RealDrums can be used with any Band-in-a-Box® 2026 (and higher) package.
Here’s just a small sampling of what you can look forward to in XPro Styles PAK 10: Soft indie folk worship songs, bumpin’ country boogies, gospel praise breaks, hard rockin’ pop, funky disco grooves, smooth Latin jazz pop, bossa nova fusion, western swing, alternative hip-hop, cool country funk, and much more!
Special offers until December 31st, 2025!
All the XPro Styles PAKs 1 - 10 are on sale for only $29 ea (Reg. $49 ea), or get them all in the XPro Styles PAK Bundle for only $149 (reg. $299)! Order now!
XPro Styles PAKs require Band-in-a-Box® 2025 or higher and are compatible with ANY package, including the Pro, MegaPAK, UltraPAK, UltraPAK+, and Audiophile Edition.
Introducing Xtra Styles PAK 21 – Now Available for Mac Band-in-a-Box 2025 and Higher!
Xtra Styles PAK 21 for Mac & Windows Band-in-a-Box version 2025 (and higher) is here with 200 brand new RealStyles!
We're excited to bring you our latest Xtra Styles PAK installment—the all new Xtra Styles PAK 21 for Band-in-a-Box version 2025 (and higher)!
Rejoice, one and all, for Xtra Styles PAK 21 for Band-in-a-Box® is here! We’re serving up 200 brand spankin’ new styles to delight your musical taste buds! The first three courses are the classics you’ve come to know and love, including offerings from the rock & pop, jazz, and country genres, but, not to be outdone, this year’s fourth course is bro country! A wide ranging genre, you can find everything from hip-hop, uptempo outlaw country, hard hitting rock, funk, and even electronica, all with that familiar bro country flair. The dinner bell has been rung, pickup up Xtra Styles PAK 21 today!
In this PAK you’ll discover: Energetic folk rock, raucous train beats, fast country boogies, acid jazz grooves, laid-back funky jams, a bevy of breezy jazz waltzes, calm electro funk, indie synth pop, industrial synth metal, and more bro country than could possibly fit in the back of a pickup truck!
Special offers until December 31st, 2025!
All the Xtra Styles PAKs 1 - 21 are on special for only $29 each (reg $49), or get all 21 PAKs for $199 (reg $399)! Order now!
Note: The Xtra Styles require the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box®. (Xtra Styles PAK 21 requires the 2025 or higher UltraPAK, UltraPAK+, or Audiophile Edition. They will not work with the Pro or MegaPAK version because they need the RealTracks from the UltraPAK, UltraPAK+, or Audiophile Edition.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
) People were very happy to just put a song into BiaB, do some harmonies and/or play a MIDI guitar controller and come out with good results; good results being based on that era. They could also DL a song from the Internet and have it play. Those were big things back then and people did not have to worry about assigning channel numbers, picking VSTis, etc.
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean