Here's a guide for energyXT 2.6 This will allow you to generate up 7 MultiRiffs in BB64 (613 or higher) and BB32 2017 UP, it will play them in sync to your other BB tracks allowing you to choose the best riff/section. To use energyXT2.6 in BB64/32 you need JBridge
To use in BB64, in the Mixer select the Plugins Tab then click the Audio+ bottom right of the Mixer, click [None] at the top click Plugin drop down, at the bottom select 'Add VST Plugin...' > energyXT2 VST.dll (this is an Effects plugin, energyXT2 VSTi.dll is an instrument plugin for a midi track) in your JBridge settings (at the bottom of the VST window that will come up when using a 32bit VST) set the plugin to open in new GUI then unload the VST, now load it back in.
To use in BB32 2017 Up you will also need http://jstuff.wordpress.com/pluginflipflop/ in the Mixer select the Plugins Tab then click the Audio+ bottom right of the Mixer, click [None] at the top click Plugin drop down, at the bottom select 'Add VST Plugin...' > 32bit PluginFlipFlopFX.dll click 'Load new' > energyXT2 VST.dll (this is an Effects plugin, the energyXT2 VSTi.dll is an instrument plugin for a midi track that can be used with PluginFlipFlopSynth.dll)
You can read all these instructs or just watch the video below. *Make sure the energyXT Play button is on before playing BB ! The quickest way to get the BB song tracks into energyXT before multiriffing is Audio > Export Song as Audio file > (also check One File Per Track) now drag all the tracks (except master mix) from the folder that pops up into energyXT (make sure you hit the rewind button first and drag them hard to the left, you can also drag Midi or RealCharts in) After you have the song tracks out into the energyXT click track 1 and select the instrument you want to MultiRiff, type the RT number down in the filter now in the top left of the Picker select the next track and set it to the same RT, do the same for all 7, 'Close' the Picker select bar 1 > F5 set all tracks except Audio to 'Mute' select the bar where you want the MultiRiff to start F5 set all tracks except Audio to 'Back to Normal', select the bar where you want the MultiRiff to end F5 set all tracks except Audio to 'Mute'. You simply highlight the bars you want to preview with the riff starting a bit before the riff and ending just after then make sure the Play button is on in energyXT and press F10 in BB to loop the selected section of bars, using right click to solo the Audio track and Riff 1 then un-solo Riff 1 and solo Riff 2 and so on. If there is a couple of riffs you like but want more just freeze those tracks and hit the >+ to re-generate the others.
Follow question: would I be able to host this via Minihost Modular (which can mix up MIDI and Audio FX plugins in the chain) and therefor not have to download and use pluginflip?
Unless I'm misunderstanding, the point of pluginflip is simply to get a MIDI plugin working on an audio track in BiaB--which I can do already w. minihost. Am I on the right track here?
Thanks!
Band-in-a-Box 2024. Custom Build Desktop PC W/ Windows 10 Home 64-bit. CPU: Intel Core i5-9600k @ 3.7GHz (6 core x 6 threads) RAM: 16GB DDR4. Storage 238GB SSD + 2.7 TB HDD. GPU: ZOTAC NVIDIA GeForce GTX 1050 Ti 4GB
You only need FlipFlop or MiniHost for the 32 bit version of Biab.
I see,
Welp, I purchased Jbridge back in 2015 (I think) and never had a pressing use for it--until now!
It's actually some of the automation functions I saw in some 5-6 year old videos on YT that REALLY has me fired!
I won't have time to look into it until later in the day, but I sense you would be able to use it to write automation for all my plugin parameters like in Reaper but in BiaB!
Band-in-a-Box 2024. Custom Build Desktop PC W/ Windows 10 Home 64-bit. CPU: Intel Core i5-9600k @ 3.7GHz (6 core x 6 threads) RAM: 16GB DDR4. Storage 238GB SSD + 2.7 TB HDD. GPU: ZOTAC NVIDIA GeForce GTX 1050 Ti 4GB
To use energyXTvst in Biab64 inside MiniHost you need to create a 64 bridge file of energyXT using jBridger.exe flipflop is free for use with jbridge in the 32bit Biab
For users (like me) that are NOT in the know and want the answer to the questions, "What is EnergyXT" and "Where can I get it"? +++ Get It Here +++
From the EnergyXT website:
Quote:
- Music production with amazing workflow and set of features. - Unlimited tracks of midi, drums and audio - Supports VST instruments and effects - Multi-track direct-to-disc audio recording - High quality pitch-shifting and time-stretching using elastique - Import wav, aif, mid, mp3 (lame) and rex/rx2 loops - Audio bounce, freeze and multi-track export - Built-in effects and synthesizer with sample support - Mixer with group channels and unlimited insert and send effects - Clip based automation of mixer and VST plugin parameters
Audio engine
- 32-bit audio engine with time-stretching/pitch-shifting algorithm from zplane development - Supports industry standard VST instruments and effects - Thread-based disk streaming and audio recording - Automatic plugin delay compensation - Offline render to 16/24/32 bit mono/stereo wav files at any sample rate - Runs with ASIO, ALSA or as VST plugin
User interface
- Streamlined interface with skinning support - Arrange/dock editor windows into multiple tabs - Transporter bar with metronome and tempo - Browser with drag & drop of instruments, effects, samples and loops - Modular component view for MIDI and audio routing
Sequencing and recording
- Unlimited MIDI, audio, drum, and folder tracks - Master tempo, time-sig and marker tracks - Track types: MIDI, audio, drum-samnpler and folder track - Multi-track recording - In-track editing of MIDI, audio, and drum events - Track-mixer for easy mixing of selected track - Arpeggiator with random and probability on each MIDI track - Swing/shuffle control on each track - MIDI, audio, and drum parts can be saved as self-containing library clips (.xtc) - Parts can be ghosted (edit one part, and all other parts will be updated too) - Clip-based automation of all Mixer and VST parameters - Per sample forward/reverse and 3 resample modes: normal, re-pitch and stretch - Popup-editor for MIDI and audio parts - Supports 16/24/32 bit mono/stereo wav formats as well as REX2 (Win and Mac only)
Mixing and automation
- Per-channel trim, volume, pan, mute, and solo - Unlimited insert effects and send effects per channel - 4-band equalizer per channel - All parameters in the mixer can be automated from the sequencer and/or external MIDI in - Any number of group channels can be added for sub-mixing
Synthesizer
- Phase modulation synthesizer and sampler in one - Layer and split synthesized and sampled sounds - Per-program reverb and delay effects - Multi-mode filter with cutoff and resonance - Poly, mono and glide - Volume and filter envelopes - 4 LFO's and 4 envelopes with 4 param destinations each - Per-sound phaser and chorus/flanger - Option to edit "all" sounds at once
Multi effect processor
- Available effects: reverb, delay, guitar amp, chorus/flanger, phaser, bit crusher, filter, and compressor. - Any number of effects can be used in a chain
Cari amici
È stata aggerate la versione in Italiano del programma più amato dagli appassionati di musica, il nostro Band-in-a-Box.
Questo è il link alla nuova versione 2025.
Di seguito i link per scaricare il pacchetti di lingua italiana aggiornati per Band-in-a-Box e RealBand, anche per chi avesse già comprato la nuova versione in inglese.
Band-in-a-Box® 2025 pour Windows est disponible en Français.
Le téléchargement se fait à partir du site PG Music
Pour ceux qui auraient déjà acheté la version 2025 de Band-in-a-Box (et qui donc ont une version anglaise), il est possible de "franciser" cette version avec les patchs suivants:
Band-in-a-Box 2025 für Windows Deutsch ist verfügbar!
Die deutsche Version Band-in-a-Box® 2025 für Windows ist ab sofort verfügbar!
Alle die bereits die englische Version von Band-in-a-Box und RealBand 2024 installiert haben, finden hier die Installationsdateien für das Sprachenupdate:
Update Your Band-in-a-Box® 2025 to Build 1128 for Windows Today!
Already using Band-in-a-Box 2025 for Windows®? Download Build 1128 now from our Support Page to enjoy the latest enhancements and improvements from our team.
Already using RealBand® 2025 for Windows®? Download Build 5 now from our Support Page to ensure you have the latest enhancements and improvements from our team.
PowerTracks Pro Audio 2025 is here! This new version introduces many features, including VST3 support, the ability to load or import a .FLAC file, a reset option for track height in the Tracks window, a taller Timeline on the Notation window toolbar, new freeze buttons in the Tracks window, three toolbar modes (two rows, single row, and none), the improved Select Patch dialog with text-based search and numeric patch display, a new button in the DirectX/VST window to copy an effects group, and more!
First-time packages start at only $49. Already a PowerTracks Pro Audio user? Upgrade for as little as $29!
Video: Summary of the New Band-in-a-Box® App for iOS®
Join Tobin as he takes you on a tour of the new Band-in-a-Box® app for iOS®! Designed for musicians, singer-songwriters, and educators, this powerful tool lets you create, play, and transfer songs effortlessly on your iPhone® or iPad®—anytime, anywhere.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean