I found this in the PG-Forum
------------------------------
13. How do I record multiple MIDI or Audio tracks simultaneously, or send different tracks to separate ports?

If you are recording MIDI, RealBand will not record on multiple tracks, but you can record to one track and then use the Edit | Extract Channels to Tracks command to split the track into multiple tracks. This works if there is multiple channel information in the MIDI Stream. Make sure you have each of the MIDI input ports you wish to use selected in the MIDI Driver Setup dialog

--------------------------

So I was successful: with Realband
Track 1 set to Midi channel1

Track 9 set to Midi channel9

Track 10 set to Midi channel10

I recorded on track 10 turning on the drum machine on the Yamaha Keyboard, while playing piano notes. Both drums and piano playing was placed on one midi track...

I used the command: Extract channels to tracks...

I got my piano playing on a separate midi track; plus two new drum midi tracks that were set to channel's 9 & 10

I reset the given new track from track 9 which was set to channel 9; that I reset to channel 10.

(Note)
The Yamaha drum machine player sends drum data on both channel 9 & 10

So when I played back the recorded midi drum tracks most of the drum sounds were correct.

It was a good idea for me to download the midi monitor to see what channel's my Yamaha keyboard produced.

The Extract midi channels to separate tracks was the feature solution that was missing.

No ports needed adjusting

All is well now....

Last edited by LPman; 05/23/19 07:52 AM. Reason: clearer sentences
Tethered 2018- Band-in-a-Box 2018 Source Files