I would like my real digital piano to play the piano parts from BIAB. It sounds just so much better and will get a more band like feeling.
I have a Yamaha P-115 with USB MIDI.
How do I set up the MIDI and sound driver options in BIAB to allow BIAB output for the piano channel to go to the piano and the rest still via VirtualMIDISynth?
The piano does come up in the the BIAB driver setup under MIDI Output driver as Digital Piano 1.
So far so good but what then?
Best regards Bernt
Last edited by berntd; 11/02/1903:59 PM.
Band in a Box Latest: ULTRA 2020 (734) on Win 10 And: MEGA 2020 (720) on Windows 7
The Yamaha P-114 is a silent acoustic piano that you can lift the hammers of and use as a digital piano. It has some built in midi voices therefore. Not really certain what you want to do here .
As you say BIAB can see it as digital piano 1 so your drivers seem set up ok, to talk to Biab . So if you select it as an input, you can use it on the Thru track to drive midi voices in BIAB set on the Thru track in the mixer, as simply a controller midi keyboard . That is it will send the midi notes you play on the keyboard through to your thru track and play that midi voice from your chosen synth or vst /dxi
I want the piano to play the BIAB piano tracks as per the MIDI styles.
I have not managed to set that up. When I select the Digital Piano1 in the output driver section, all ouput goes to the piano. Or at least, all sound output stops from the PC speakers and the piano plays correctly.
So I need a setup method to have only the piano track output use the Digital Piano1 driver and the rest needs to go through the VS as before. How do I do that?
Last edited by berntd; 11/01/1901:33 PM.
Band in a Box Latest: ULTRA 2020 (734) on Win 10 And: MEGA 2020 (720) on Windows 7
I found this in a old thread here in the forum. I think I know what you are trying to do. It will do it, but I'll be darned if I can remember how each time I want to. So this has been discussed here in the past. Honestly, it should not be so trickly.
------------------------
For live playing from an external MIDI keyboard while using a VSTi synth, the ideal setup is to use ASIO drivers, and have the 'ASIO Always On' setting enabled (Opt. | Preferences | Audio). This allows you to play in real-time from a MIDI keyboard, and have the sound played by the plugin synth with very little latency.
One alternative if you're unable to use ASIO drivers, is to uncheck the option in the MIDI Driver Setup "Route MIDI Thru to MIDI Driver" and your playing will still go through the DXi synth - but there will be some latency.
Regarding the latency, I agree. But if you use a ASIO driver, is not too bad.
Otherwise, ya I see you are doing something else. I don't think you can send midi to two places. But there is a workaround. It was an old vst written long ago call "redirector". I think you need that to send midi to two different locations.
MIDI could daisychain when it had the proper connectors. Can't the MIDI go in on the piano and out on the thu back to the PC and then to the Synth? All via USB somehow or the other way, to the VST and on it's Thru, to the piano.
Somehow?
Last edited by berntd; 11/01/1904:02 PM.
Band in a Box Latest: ULTRA 2020 (734) on Win 10 And: MEGA 2020 (720) on Windows 7
Sorry, I am having a little trouble understanding exactly what you are trying to do. On top of that not many others coming to our help. And finally, I am afraid that using a keyboard midi controller with BAIB is not the most efficient or practical workflow - software just don't support it well. I speak from experience on this last statement. My midi keyboard controller works like a charm through my DAW. So BIAB tracks goes to Reaper when the keyboard is involved.
Don't want to send you on a wild goose chase but here is the info on the redirector. This will send midi out through the thru channel to an external devise while still allowing you to play all the real tracks via you BIAB audio out.
We used this to drive harmonies in the TC Helicon units in the past. I have a video of it being set up, here: https://www.youtube.com/watch?v=D3KP4y2hioY from over 3 years ago.
Just noticed it is 32bit. It may or may not help. But until someone smarter then us comes along it is all I got for now.
HI Again Just popped my head back in to try to help a bit . Bit of long read but, this works for me . But I do have a Yamaha CVP 405 that has a full set of midi voices plus a set of xg voices and panel voices . So I can set this as my external synth for all midi from biab
New BIAB W10 pc for my Yamaha CVP 405.
Hi ALL
After my recent success with W7 to W10 upgrades on my 2 existing PCs, I decided to push the boat out and buy a new PC so that I could have BIAB and some of my other music software permanently connected to my Yamaha Clavinova CVP405 in my Lounge .
This saves me having to break down and move my existing BIAB PC from my normal every day work station and controller keyboard and Audio interface, to the other room and reset all midi and audio drivers to suit, then change them back again when I bring it back. As I had not used my 3 BIAB installs allowed, and still had a spare license for Acronis True image it just had to find a suitable PC.
In the end I went for a 24 inch White all in one from HP
Processor - Intel® Core™ i5+ 8250U Processor
- Quad-core- 1.6 GHz / 3.4 GHz- 6 MB cache
RAM 8 GB DDR4 (2400 MHz)
Storage 2 TB HDD (7200 rpm)
The 24” monitor would also mean I could display 2 A4 size PDF pages of music sheets side by side, useful as the pc screen would be using my music stand .
Works like a dream. This now gives me access to 6095 BIAB styles when using my CVP with BIAB running, with up to 40 variations in each style intelligently generated from my chord sequence.
Here is my brief description of how I connect. First the CVP is connected via midi over usb lead to my PC, this allows BIAB to see the CVP as my midi synth and a midi input device. As set in my midi and audio settings on BIAB.
With the aid of a pat file converted from a cakewalk ins file (instrument definition) I can access all the CVP’s 884 Midi voices and 19 Drum sets. In BIAB. Select higher bank option .
To make use of the many excellent Realtracks styles an Real drums. I feed the audio output of the PC to the line input of CVP.
This allows me to hear the Real tracks etc. audio from the CVP sound system and speakers, and play live over the top ( with careful adjustment of the PC sound out and the line in trim pot on the Yamaha )
I can now sing over the top with vocal harmony if required by sending the root chords from the BIAB chord sheet over the midi connection using the set midi chords to output option in BIAB ( options /preferences/output channel ).
The whole lot can be recorded on the Yamaha CVP built in Audio recorder as a wav file.
Just my way hope it helps some one wanting to use a Yamaha keyboard with Band In A Box or maybe the free Cakewalk prog, if only as a midi Synth.
Just by way of an update I have printed a pic of my wiring diagram for those interested in these things,.
Probably looks like a nightmare to some but I enjoy playing with the technology.
do you have any idea perhaps where I might find the re-director file VSTiToMidi_100.zip?
The links in that wiki seem defunct or at least i cannot get them to load.
I have it here somewhere. See if Mike's recommendations work for you and then let me know if you still want to try the redirector and I can upload and provide a link.
Yes all my midi as the clav has such good midi voices I thought I would use them. rather than a vst. [Plus I get the sound, and sound system from the clav which is as big as a small grand piano. Together with the realtrack audio via the clav aux in. As mentioned I do use a pat file to access the higher bank CVP midi voices. Mike PS I notice your p115 only has 14 piano type voices so I see your problem. I will try and give it some thought. Dan seems on the right track.
Mike, I love your "thinking out of the box", the Band in a box, box that is! I have had similar configurations. But the complexity ultimately gets me. Even now, I swear I start out the morning with plans for recording and it takes me an hour just to get the darn system all functioning. And I have far less complexity then shown in your figure.
Berntd, since you have Biab 2019 you do that in the Mixer. Go to the Help File Index and type in Mixer. That gives you everything you need to know about how the Mixer works. Scroll down in that window until you come to the Plugins section. Read that part but I'll give you the instructions.
You click on the Plugins tab on the top of the Mixer window to start. You see each track. Piano should be Track 2, click the little down arrow to the far right of that track and it opens up the Plugins window. The first slot is for midi instruments and the next three slots are for effects. Click on the down arrow in the first slot and you will see all the synths you have. You should be able to select your Yamaha driver. Then select a different synth for the rest of your midi instruments.
This is something new for Biab. I'm not sure if it started with 2019 or 2018 but prior to that Biab only had one midi output port so you could not do this.
Would have been nice if it did Bob, But the plugin window only allows you to insert Vsti and Dxi midi synths, not external midi Synths. Just tried no go.
User Video: Band-in-a-Box® + ChatGPT = Impressed the BOSS!
Since AI is now readily available online as a resource for many things, we recently put together and shared a video where we demonstrated how to create a song using Band-in-a-Box®, ChatGPT, and Synth V; we've also shared a Bob Doyle Media video, Convert MIDI Chords into AI Vocal Harmonies with ACE Studio and Band in A Box, showing how they utilize AI for their song projects. Now it's time to share Henry's video, Band-in-a-Box + ChatGPT = Impressed the BOSS!, where he demonstrates how to use ChatGPT and Band-in-a-Box to whip a song project together in only 3-4 hours.
Visit Henry Clarke's YouTube Channel, Henry Clarke - Senior Musicians Unite, to find a large collection of tutorials showing the viewer how to achieve amazing results using Band-in-a-Box®!
If you've reviewed our Support page, you've probably noticed the Videos page, which separates our Band-in-a-Box® tutorial videos by category: Overview, VST DAW Plugin, Setup, Beginner, Intermediate, Advanced, and there's even an Archive category to go down memory lane... (You'll also find these videos on our YouTube Channel.)
Ci siamo dati da fare e abbiamo aggiunto oltre 50 nuove funzionalità e una straordinaria raccolta di nuovi contenuti, tra cui 222 RealTracks, nuovi RealStyles, MIDI SuperTracks, Instrumental Studies, "Songs with Vocals" Artist Performance Sets, Playable RealTracks Set 3, Playable RealDrums Set 2, due nuovi set di "RealDrums Stems", XPro Styles PAK 6, Xtra Styles PAK 17 e altro ancora!
Band-in-a-Box® 2024 apporte plus de 50 fonctions nouvelles ainsi qu'une importante de contenus nouveaux à savoir : 222 RealTracks, des RealStyles nouveaux, des SuperTracks MIDI, des Etudes d'Instruments, des Prestations d'Artistes, des "Morceaux avec Choeurs", un Set 3 de Tracks Jouables, un Set 2 de RealDrums Jouables, deux nouveaux Sets de "RealDrums Stems", des Styles XPro PAK 6, des Xtra Styles PAK 17 et bien plus encore!
Video: Making a Song with Band-in-a-Box®, ChatGPT, and Synth V
Take your Band-in-a-Box® project to a whole new level when you incorporate ChatGPT and Synth V to add lyrics and vocals to your song!
We wanted to demonstrate how this is done with our video, where we show you how to go from nothing to a finished "radio ready" modern pop song by combining the features of Band-in-a-Box®, ChatGPT, and Synth V!
User Video: Convert MIDI Chords into AI Vocal Harmonies with ACE Studio and Band-in-a-Box®
The Bob Doyle Media YouTube channel is known for demonstrating how you can creatively incorporate AI into your projects - from your song projects to avatar building to face swapping, and more!
His latest video, Convert MIDI Chords into AI Vocal Harmonies with ACE Studio and Band-in-a-Box, he explains in detail how you can use the Melodist feature in Band-in-a-Box with ACE Studio. Follow along as he goes from "nothing" to "something" with his Band-in-a-Box MIDI Melodist track, using ACE Studio to turn it into a vocal track (or tracks, you'll see) by adding lyrics for those notes that will trigger some amazing AI vocals!
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.