Having sorted out my 6/8 problem (thanks Noel) I am now getting unwanted double bars in the leadsheet previews and printouts. Here are some screen shots. Anyone come across this? Is it finger trouble on my part? If not, are there any fixes or workarounds?
This looks you've loaded in an external BIAB file that has been created using multiple repeats.
If you look closely at the bar numbering, you'll see that the repeats are required to reach the next bar number that follows a repeat.
For example: bars 17-24 are enclosed with repeats. This means, that when you play it, the song will get to bar 24 and then go back to bar 17 (which in repeat terms now becomes bar 25). By the time the repeat playback reaches bar 24 for the second time, it's become bar 32. This is why the bar number immediately after bar 24 is bar 33.
To see what I mean....
BEFORE DOING THE BELOW -- save the song file with a new name so that you can always get back to the original if you want to.
1. Click on "FakeSheet" (i.e #1 on the image below). If your view of BIAB is different from mine, press CTRL+T to switch to 'Standard View' rather than 'Full Screen View'.
2. De-select the first option in the FakeSheet settings (#2). You will now see the repeated bars expanded in full and those bars that are repeated will be in gray.
3. Click on "FakeSheet" (#1) again, and this time, de-select the bottom option (#3). You will be asked if you want to erase the repeats. It's safe to do so.
You'll now have a fully expanded song without repeats.
Ahhh... I didn't pick that up from your first post.
Without physically loading the songfile onto my system, I cannot say with 100% certainty what is wrong.
What does look unusual with your chordsheet is that you have red lines under just about every bar number. This means that "bar settings" is active in those bars. I'm suspecting that it is something in these settings that is causing the issue (maybe a key change).
The below might help you isolate the problem...
1. Right-click within the middle of one of the bars that has a red line under its number and select "Bar Settings" from the menu that pops up.
2. As shown on the image below, down the bottom of the Bar Settings window, there's a button called "Pint Summary". Press this and it will create a summary of all the bar settings through out the song. This might let you see what the issue is.
I misunderstood this question as well. Now that we see what to look for, I do not have any solid idea except to look at what Noel has suggested.
One possible thought, though: Ricobasso, what font are you using for the chordsheet? It might account for why you see something we haven't. If you are using a different font, perhaps there is an error in that symbol.
BIAB 2025 Win Audiophile. Software: Studio One 7 Pro, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus 192 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.
What does look unusual with your chordsheet is that you have red lines under just about every bar number. This means that "bar settings" is active in those bars. I'm suspecting that it is something in these settings that is causing the issue (maybe a key change)
I got those when I changed the time sig from 4/4 to 2/4 and selected the range of bars over which this applied.
Is there an easier way to just set the whole song to 2/4?
I got those when I changed the time sig from 4/4 to 2/4 and selected the range of bars over which this applied.
Is there an easier way to just set the whole song to 2/4?
You should be able to just change the first bar to 2/4. Unless you make another change at a different bar, that 2/4 time signature will continue throughout the entire song.
BIAB & RB2025 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
Also, you can first Reset all Bars from the bar settings page:
That just resets all bars back to 4/4 and resets the "# beats this bar" field to "0". That's no use to me; I want to set all bars to 2/4 so that there are only two triplets per bar.
You only need to set "#beats this bar" = 2 in the first bar where 2/4 begins. After that, all other bars will be 2/4 until you change back to 4 beats per bar.
For example... if you want to have 2/4 from bar 6 to bar 29, in bar settings at bar 6, put "# Beats this bar" = 2. Then, at bar 30 put "# beats this bar" = 4.
Now, from bar 6 to bar 29, the song will play in 2/4. It will also play in 4/4 from bars 1 to 6 and bars 30 to the end of the song.
Videotrack's post a couple above this one is how to reset the chordsheet back to its original state so that you can modify the first bar of 2/4.
I understand your confusion it got me going for a while.
Once you have made any change under bar settings it only shows in the bar that you make the change. When you look at the next bar you see no change (that’s because there is not, another change until you make one, later in the sheet.) In other words changes are from that point on.
Also there is a handy print summary button at the bottom left of the bar change window that will give you a text file of all bar changes in the song, this is very useful if you have a complicated song.
Videotrack's post a couple above this one is how to reset the chordsheet back to its original state so that you can modify the first bar of 2/4.
Thanks Noel. Yes, that was the intention of my follow-up post but possibly I didn't articulate it very well. Definitely thanks for clarifying, appreciated. Trev
BIAB & RB2025 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
I wondered the same thing. Rico, has it been resolved?
Yes and no.
Yes because I can change the time sig by either 1. in the first bar in "bar settings" and it will remain for the rest of the song, or 2. I can click on the time sig in the song box at the top and change the time sig for a range of bars.
No, because neither of the above options changes the "Timesig" display in the song box. i.e there is no confirmation that anything has happened unless you play, listen and count, or, go to bar settings and do a "print summary" in "bar settings"- all very long-winded - A very unsatisfactory piece of software writing.
Band-in-a-Box® 2025 for Mac is here, packed with major new features and an incredible collection of available new content! This includes 202 RealTracks (in Sets 449-467), plus 20 bonus Unreleased RealTracks in the 2025 49-PAK. There are new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 4, two new sets of “RealDrums Stems,” XPro Styles PAK 8, Xtra Styles PAK 19, and more!
Special Offers
Upgrade to Band-in-a-Box® 2025 for Mac with savings of up to 50% on most upgrade packages during our special—available until July 31, 2025! Visit our Band-in-a-Box® packages page for all the purchase options available.
2025 Free Bonus PAK & 49-PAK Add-ons
We've packed our Free Bonus PAK & 49-PAK with some incredible Add-ons! The Free Bonus PAK is automatically included with most Band-in-a-Box® for Mac 2025 packages, but for even more Add-ons (including 20 Unreleased RealTracks!) upgrade to the 2025 49-PAK for only $49. You can see the full lists of items in each package, and listen to demos here.
If you have any questions, feel free to connect with us directly—we’re here to help!
Cari amici
È stata aggerate la versione in Italiano del programma più amato dagli appassionati di musica, il nostro Band-in-a-Box.
Questo è il link alla nuova versione 2025.
Di seguito i link per scaricare il pacchetti di lingua italiana aggiornati per Band-in-a-Box e RealBand, anche per chi avesse già comprato la nuova versione in inglese.
Band-in-a-Box® 2025 pour Windows est disponible en Français.
Le téléchargement se fait à partir du site PG Music
Pour ceux qui auraient déjà acheté la version 2025 de Band-in-a-Box (et qui donc ont une version anglaise), il est possible de "franciser" cette version avec les patchs suivants:
Band-in-a-Box 2025 für Windows Deutsch ist verfügbar!
Die deutsche Version Band-in-a-Box® 2025 für Windows ist ab sofort verfügbar!
Alle die bereits die englische Version von Band-in-a-Box und RealBand 2024 installiert haben, finden hier die Installationsdateien für das Sprachenupdate:
Update Your Band-in-a-Box® 2025 to Build 1128 for Windows Today!
Already using Band-in-a-Box 2025 for Windows®? Download Build 1128 now from our Support Page to enjoy the latest enhancements and improvements from our team.
Already using RealBand® 2025 for Windows®? Download Build 5 now from our Support Page to ensure you have the latest enhancements and improvements from our team.
PowerTracks Pro Audio 2025 is here! This new version introduces many features, including VST3 support, the ability to load or import a .FLAC file, a reset option for track height in the Tracks window, a taller Timeline on the Notation window toolbar, new freeze buttons in the Tracks window, three toolbar modes (two rows, single row, and none), the improved Select Patch dialog with text-based search and numeric patch display, a new button in the DirectX/VST window to copy an effects group, and more!
First-time packages start at only $49. Already a PowerTracks Pro Audio user? Upgrade for as little as $29!
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean