HI
Yes that sounds fine.

The reason you have 2 sets of Roland shown is likely to be because there are 2 sets of midi in and out ports on the keyboard it could be that one set comes via usb and the other by normal 5 pin midi skts in and out. Or you may have 2 sets of din plus usb.
I suspect that the usb one is the one simply marked Roland RD
Midi output driver,
If you want to use the keyboard to play midi into & thru BIAB you will need to select the midi in.
Midi out put driver
If as well you want to play BIAB and hear the good midi voices from your keyboard coming from your keyboards sound system then you need to select midiout

In all cases of course in goes to out and out goes to in.
A pat file would alow you to use the higher bank Roland voices
I am assuming that the roland has a full set of midi voice and not just a few pianos.
I will look it up and get back if there is a problem.

Mike

Ps
Just had a look at the spec and although it says it has 1000 or so tones it does not mention a full Gm SET just pianos tone wheel organs and classic synths.
In which case it will not improve you Biab midi voices.

Last edited by Mike Head; 12/18/19 05:58 AM.
BIAB2021 UltraPlus,AsusN55S1Tbssd, W10/64,Akai EIEpro
Yamaha CVP405,SquireStrat, CoolsoftVMidSynth
Novatation Impulse61 Ctr kbd, Cwalk blab Kontakt

http://mikesmusic.byethost16.com/