If the voice is 'off' you may have conflicting settings in your audio driver bit rates. (Between Tascam and Band in a Box). The point of the audio track is to record voice or instrument in only, not record the output of band in a box, because the next time you hit play it will play the drums twice. Your input meter when band in a box is playing should show only your voice, not spiking to the drums.

Go into the Windows Audio setup and ensure all the volume sliders are at MAX, and adjust your voice input so that when you speak it almost gets in to the red. Note that you might want to set the record track to Mono first, and then try stereo. When trouble shooting this I use an 8 bar nothing song so it happens fast and I can tweak things and get it right.

Good Luck.


John Conley
Musica est vita