Never happened to me before but for any of the guitarists here, have you ever had a guitar bridge just totally come off, had a little play in the morning and when I reached to take it off stand for or five hours later was met by this. Good job its not a expensive guitar, though its still within the warranty period.
Windows 10 (64bit) M-Audio Fast Track Pro, Band in a Box 2025, Cubase 14, Cakewalk and far too many VST plugins that I probably don't need or will ever use
Looking at this from a carpenter's point of view .. the wood under the bridge has torn. It doesn't look like the glue gave out but rather the glue held strong enough to sheer the wood. The bent metal retaining bar is another clue.
To me it looks like the guitar went thru some type of event. Doesn't look like a defect to me, more like the guitar got damaged. Maybe it happened three months ago and it weakened over time until today, but no, I've never seen a guitar bridge come off like that. Show us the bottom of the bridge. Is the missing body wood still stuck to it?
I do not work here, but the benefits are still awesome Make your sound your own!
Someone knocked over my PA speaker column into the guitar - a 1972 Yamaha Red Label FG500 (a gorgeous sounding guitar)... putting a hole in the guitar front a couple of inches below the bridge. Several months later, the bridge gave loose - taken wood with it (like yours only worse).
That was 1975. Being young and foolish like I was at the time, I glued it back together with Elmer's Wood Glue. (I close the hole with it, too)
It has held together since. And the guitar still sounds AMAZING. I would never give it up. I recently went "guitar shopping" and a $5000 Taylor was the ONLY thing I played that came close to the sound...
Its one of their cheap and as I hoped for cheerful Harely Benton, their own in house brand.
When I got it first, the strings were all covered in guitar paint, as if the factory that made the guitar simply put the strings on before they finished it, but hey I thought a set of strings doesn't cost much so wasn't going to complain about that.
Definitely never had any accidents with this guitar, I thought the piece of metal you refer to is part of the pickup system that just sits under the saddle, its just like a wire really.
I did a web search on bridges lifting and it seems some guitar do have a bridge plate inside to strengthen the bridge but I think none inside this guitar
Anyway they do seem to be a very reputable company otherwise, really big and do offer a three year warranty on all their products (just got it last July) so hopefully I will be ok, only thing is if they mend it, there lingers the possibility it might happen again, or almost as bad you are waiting for it to happen
If it happened out of warranty I would be tempted to glue it myself, but any videos I have looked at always end up using guitar clamps to hold it together while the glue sets and they are not the cheapest just for a one off job.
Windows 10 (64bit) M-Audio Fast Track Pro, Band in a Box 2025, Cubase 14, Cakewalk and far too many VST plugins that I probably don't need or will ever use
Yes a I've seen a few in my life, as here matter of fact here is some "how to's" if planning on doing your own repair - just be careful with that pickup (and yes that IS what that metal "BAR" is) - if unsure what to do take it to a luthier/guitar repair shop (not a Stratocaster relic’ing expert or metal head shop - LOL) - repairs for something like that are routine and usually inexpensive.
Win10Pro,i9,64GB,2TBSSD+20TBHDDs,1080TI,BIAB'24,Scarlett18i8,Montage7,Fusion 8HD,QS8,Integra7,XV5080,QSR,SC-8850,SPLAT,FL21&others,Komp.14,IK suite&others, just a guitar player-AXE FX III &FM9T, FishmanTP, MIDIGuitar2, GK2/3'sw/GI20
Well, it's under warranty, so probably you will find out if they'll repair or replace it.
It's interesting that the problem doesn't appear to be a lack of cohesion from the adhesive, as it has actually torn the spruce timber away.
BIAB & RB2026 Win.(Audiophile), Windows 10 Pro & Windows 11, Cakewalk Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Session Keys Grand S & Electric R, Kontakt, Focusrite 18i20, KetronSD2, NS40M, Pioneer Active Monitors.
That repair will cost probably as much as a replacement guitar in the same price range as the Harley Benton. Because it’s not just a reglue. The wood was not up to the task and classical gut strings don’t exert nearly the force of steel strings. You didn’t restring it with steel strings did you?
Thanks a lot for replies, No I only used nylon strings to restring it,seems the consensus is, that the wood wasn't up to the task other than the glue coming away.
Thomanns did ask for pictures so have the original packing handy to send it back, will see how it goes.
Windows 10 (64bit) M-Audio Fast Track Pro, Band in a Box 2025, Cubase 14, Cakewalk and far too many VST plugins that I probably don't need or will ever use
Bummer. In this price range I think they'll just send you another guitar. At least I hope so. But, if they do glue that bridge back on and do it properly it will likely be fixed for good with no worries. Often a proper repair is stronger than the original build and usually has no noticeable effect on sound quality (timbre) or volume. The wait for the repair would be another bummer. Their cost for these guitars is probably well under $50 and the warranty with replacement is close to break even for them. Most "made for" distributors, and I don't know if Thomann is, usually have a warranty contract with the builder that gives them a debit memo/rebate/credit percentage on purchases in lieu of actual warranty per item basis. This reduces their labor costs including shipping and processing warranties which allows them to toss that guitar in the trash and send another one to you with zero to minimal loss on their part. They just need to get it back to hold the end user accountable for the return and so they can get a photo of the damage and the serial number so they are accountable to their builder/s. This type of warranty contract is where we get the no questions asked type of warranty on many products so I'm speaking generally but this is very common for made in China, Indonesia and other products that get distributed around the world.
I've repaired a few lifted bridges. The "proper glue" will not adhere to the wood to the extent that it splinters it like that. Looks like it and the top were not prepared correctly in addition to the wrong glue. With the correct glue it will typically just shear off and you only need to clean the old residue apply glue and clamp. In summary it does seem to be made to be repaired if that makes sense.
Bud
Our albums and singles are on Spotify, Apple Music, Amazon Music, YouTube Music, Pandora and more. If interested search on Janice Merritt. Thanks! Our Videos
one more comment that that is the undersaddle pickup and simply reglueing will need care as the pickup needs to sit absolutelty square and level under the saddle. but in terms of the repair make sure you get it done under the warranty so you get a properly repaired guitar. agree that it might be easier for them to send you a new guitar.
nylon srung guitars don't have the same problem as steel strung ones as the tension is much lower but lifting bridges is not unknown even on quality guitars. my 1971 Martin D35 had a tiny gap beneath the back of the bridge but it was easily repaired by a local luthier.
he put that down to leaving the guitar in sunlight in the conservatory on a very very hot day so now unles I'm playing, it lives in its case.
I lot of brand names are now Made In China I would counter sink 2 bolts with tapered heads and put a 1/4 wooden plate on the underside with nylock nuts and washers.
Windows 10 (64bit) M-Audio Fast Track Pro, Band in a Box 2025, Cubase 14, Cakewalk and far too many VST plugins that I probably don't need or will ever use
If you can get Valencia branded classical guitars in Ireland go for it. I have a solid cedar top one from them with a Shadow P-7 pickup in it for $150. Sounds fantastic, a little heavy compared to the multi thousand dollar stuff but pretty bullet proof. In the US you can buy them from Rondo Music
I wrote the lyrics a few nights ago as a self-improvement tune to help me remember not to be a slob. Because of this thread, I decided to use my Valencia C30E which I paid something like $150.
I also wanted to record a vintage Hohner alto melodica I bought a few weeks ago for 5$.
My classical guitar technique is pretty hack-job, just be warned!
Windows 10 (64bit) M-Audio Fast Track Pro, Band in a Box 2025, Cubase 14, Cakewalk and far too many VST plugins that I probably don't need or will ever use
PowerTracks 2026 is here—bringing powerful new enhancements designed to make your production workflow faster, smoother, and more intuitive than ever.
The enhanced Mixer now shows Track Type and Instrument icons for instant track recognition, while a new grid option simplifies editing views. Non-floating windows adopt a modern title bar style, replacing the legacy blue bar.
The Master Volume is now applied at the end of the audio chain for consistent levels and full-signal master effects.
Tablature now includes a “Save bends when saving XML” option for improved compatibility with PG Music tools. Plus, you can instantly match all track heights with a simple Ctrl-release after resizing, and Add2 chords from MGU/SGU files are now fully supported... and more!
Get started today—first-time packages start at just $49.
Already using PowerTracks Pro Audio? Upgrade for as little as $29 and enjoy the latest improvements!
Band-in-a-Box 2026 for Windows Special Offers End Tomorrow (January 15th, 2026) at 11:59 PM PST!
Time really is running out! Save up to 50% on Band-in-a-Box® 2026 for Windows® upgrades and receive a FREE Bonus PAK—only when you order by 11:59 PM PST on Thursday, January 15, 2026!
We've added many major new features and new content in a redesigned Band-in-a-Box® 2026 for Windows®!
Version 2026 introduces a modernized GUI redesign across the program, with updated toolbars, refreshed windows, smoother workflows, and a new Dark Mode option. There’s also a new side toolbar for quicker access to commonly used windows, and the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, making it easier to customize your workspace.
Another exciting new addition is the new AI-Notes feature, which can transcribe polyphonic audio into MIDI. You can view the results in notation or play them back as MIDI, and choose whether to process an entire track or focus on specific parts like drums, bass, guitars/piano, or vocals. There's over 100 new features in Band-in-a-Box® 2026 for Windows®.
There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
Upgrade your Band-in-a-Box for Windows to save up to 50% on most Band-in-a-Box® 2026 upgrade packages!
Plus, when you order your Band-in-a-Box® 2026 upgrade during our special, you'll receive a Free Bonus PAK of exciting new add-ons.
If you need any help deciding which package is the best option for you, just let us know. We are here to help!
Band-in-a-Box® 2026 for Windows® Special Offers Extended Until January 15, 2026!
Good news! You still have time to upgrade to the latest version of Band-in-a-Box® for Windows® and save. Our Band-in-a-Box® 2026 for Windows® special now runs through January 15, 2025!
We've packed Band-in-a-Box® 2026 with major new features, enhancements, and an incredible lineup of new content! The program now sports a sleek, modern GUI redesign across the entire interface, including updated toolbars, refreshed windows, smoother workflows, a new dark mode option, and more. The brand-new side toolbar provides quicker access to key windows, while the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, creating a flexible, clutter-free workspace. We have an amazing new “AI-Notes” feature. This transcribes polyphonic audio into MIDI so you can view it in notation or play it back as MIDI. You can process an entire track (all pitched instruments and drums) or focus on individual parts like drums, bass, guitars/piano, or vocals. There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
There are over 100 new features in Band-in-a-Box® 2026 for Windows®.
When you order purchase Band-in-a-Box® 2026 before 11:59 PM PST on January 15th, you'll also receive a Free Bonus PAK packed with exciting new add-ons.
Upgrade to Band-in-a-Box® 2026 for Windows® today! Check out the Band-in-a-Box® packages page for all the purchase options available.
Band-in-a-Box 2026 Video: The Newly Designed Piano Roll Window
In this video, we explore the updated Piano Roll, complete with a modernized look and exciting new features. You’ll see new filtering options that make it easy to focus on specific note groups, smoother and more intuitive note entry and editing, and enhanced options for zooming, looping, and more.
Band-in-a-Box 2026 Video: AI Stems & Notes - split polyphonic audio into instruments and transcribe
This video demonstrates how to use the new AI-Notes feature together with the AI-Stems splitter, allowing you to select an audio file and have it separated into individual stems while transcribing each one to its own MIDI track. AI-Notes converts polyphonic audio—either full mixes or individual instruments—into MIDI that you can view in notation or play back instantly.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean