So, I recently tried to record some vocals on Real Band 2020. I liked the EQ and Compression settings, but the reverb settings all sounded as if I was singing in a well and did not match the music at all. Could it be a possibility that not every song sounds good when sung from a high school gymnasium?
So, I'm now looking at vocal finalizer as a possible plug-in. Anyone have the same experiences with Real Band 2020? Am I doing something wrong? Thoughts anyone???
Also, where can I "store" cheap of free the MP3's that I record so that I can share them?
<<< "... I recently tried to record some vocals on Real Band 2020. I liked the EQ and Compression settings, but the reverb settings all sounded as if I was singing in a well and did not match the music at all." >>>
___________
That may be the case with reverb if you're using presets. If you use the PGMusic DXI effects. as you can see, they are completely adjustable.
the PG MUsic reverb plugin is easily edited - some of the presets are quite 'tame' anyway so try that.
if you don't fancy playing around with the parameters put the effect on aux bus 1 choose the preset and set the mix to full wet and then you can control the amount of reverb with the aux send knob which will give you total control of how much reverb is added
In Charlie's image you'll see a button for Presets Experiment with these, there are lots to try.
As far as adjusting this effect; The left most slider shows the default 50 ms predelay .. slide this down a bit (use your ears), this sets how long it takes before the reverb kicks in
The second most left slider shows 2000 mS decay .. 2 seconds is a lot, turn it down a bit (maybe 1100) this is how long the reverb lasts
Then look further right for the Mix slider; move this down to get more dry and less reverb, that wet/dry mix can be huge
These tips apply to any reverb used in a Track slot. If used in the AUX slot, things are different, but it sounds like you are in the track FX area from your original post.
Last edited by rharv; 02/24/2002:47 PM.
I do not work here, but the benefits are still awesome Make your sound your own!
Thanks for the explanation of the buttons/knobs. This helped a lot.
I know enough about music to figure some stuff out. But I guess that unless you've actually been in a band or around the industry, stuff like this will have somewhat of a learning curve...
Thanks for the explanation of the buttons/knobs. This helped a lot.
I know enough about music to figure some stuff out. But I guess that unless you've actually been in a band or around the industry, stuff like this will have somewhat of a learning curve...
Yep. Most older members here asked these same questions when we were learning, and someone helped us. I'm just trying to pay it back. As your learning curve gets smaller feel free to hang around and help.
FWIW I still ask my share of questions, so I'm probably in the red still on the balance sheet.
I do not work here, but the benefits are still awesome Make your sound your own!
that's a handy tip Matt, tried it and it seems a good starting point. the result so far is that if i bypass the fx after reducing it to half-ish or at least somewhat less, then with the track solo'd i can hear a difference when i kick it back in but it's a sonic improvement not an fx sound
it adds something but it's difficult to pin down. i did come across a quote once that said the best effects are the ones you can't hear!
So I never (or very rarely) put reverb on my tracks individually. I use busses in a DAW and quite often, the only reverb on the project is in the master buss. I use dry tracks into the busses. By using one reverb in the master buss, I have a more cohesive sound and it sounds like everything is in the same space. Putting verb on just vocals leaves the instruments dry and the voice wet and that sounds un-natural.
There are times and reasons I use reverb in a vocal buss but you always have to remember that reverbs in series like that are additive and you can very quickly have a "too wet" sound and wonder why. So when I have stacked reverbs in several busses, they are generally cut back more than if they were stand alone. And sometimes even that is too much. I have a number of bypassed or deleted reverbs in a bunch of projects.
You can find my music at: www.herbhartley.com Add nothing that adds nothing to the music. You can make excuses or you can make progress but not both.
The magic you are looking for is in the work you are avoiding.
Band-in-a-Box® 2025 for Mac® users: Build 904 now available!
If you're already using Band-in-a-Box® 2025 for Mac®, make sure to grab the latest update! Build 904 is now available for download and includes the newest additions and enhancements from our team.
PowerTracks 2026 is here—bringing powerful new enhancements designed to make your production workflow faster, smoother, and more intuitive than ever.
The enhanced Mixer now shows Track Type and Instrument icons for instant track recognition, while a new grid option simplifies editing views. Non-floating windows adopt a modern title bar style, replacing the legacy blue bar.
The Master Volume is now applied at the end of the audio chain for consistent levels and full-signal master effects.
Tablature now includes a “Save bends when saving XML” option for improved compatibility with PG Music tools. Plus, you can instantly match all track heights with a simple Ctrl-release after resizing, and Add2 chords from MGU/SGU files are now fully supported... and more!
Get started today—first-time packages start at just $49.
Already using PowerTracks Pro Audio? Upgrade for as little as $29 and enjoy the latest improvements!
Band-in-a-Box 2026 for Windows Special Offers End Tomorrow (January 15th, 2026) at 11:59 PM PST!
Time really is running out! Save up to 50% on Band-in-a-Box® 2026 for Windows® upgrades and receive a FREE Bonus PAK—only when you order by 11:59 PM PST on Thursday, January 15, 2026!
We've added many major new features and new content in a redesigned Band-in-a-Box® 2026 for Windows®!
Version 2026 introduces a modernized GUI redesign across the program, with updated toolbars, refreshed windows, smoother workflows, and a new Dark Mode option. There’s also a new side toolbar for quicker access to commonly used windows, and the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, making it easier to customize your workspace.
Another exciting new addition is the new AI-Notes feature, which can transcribe polyphonic audio into MIDI. You can view the results in notation or play them back as MIDI, and choose whether to process an entire track or focus on specific parts like drums, bass, guitars/piano, or vocals. There's over 100 new features in Band-in-a-Box® 2026 for Windows®.
There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
Upgrade your Band-in-a-Box for Windows to save up to 50% on most Band-in-a-Box® 2026 upgrade packages!
Plus, when you order your Band-in-a-Box® 2026 upgrade during our special, you'll receive a Free Bonus PAK of exciting new add-ons.
If you need any help deciding which package is the best option for you, just let us know. We are here to help!
Band-in-a-Box® 2026 for Windows® Special Offers Extended Until January 15, 2026!
Good news! You still have time to upgrade to the latest version of Band-in-a-Box® for Windows® and save. Our Band-in-a-Box® 2026 for Windows® special now runs through January 15, 2025!
We've packed Band-in-a-Box® 2026 with major new features, enhancements, and an incredible lineup of new content! The program now sports a sleek, modern GUI redesign across the entire interface, including updated toolbars, refreshed windows, smoother workflows, a new dark mode option, and more. The brand-new side toolbar provides quicker access to key windows, while the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, creating a flexible, clutter-free workspace. We have an amazing new “AI-Notes” feature. This transcribes polyphonic audio into MIDI so you can view it in notation or play it back as MIDI. You can process an entire track (all pitched instruments and drums) or focus on individual parts like drums, bass, guitars/piano, or vocals. There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
There are over 100 new features in Band-in-a-Box® 2026 for Windows®.
When you order purchase Band-in-a-Box® 2026 before 11:59 PM PST on January 15th, you'll also receive a Free Bonus PAK packed with exciting new add-ons.
Upgrade to Band-in-a-Box® 2026 for Windows® today! Check out the Band-in-a-Box® packages page for all the purchase options available.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean