Previous Thread
Index
Next Thread
Print Thread
Go To
Recording, Mixing, Performance and Production
Joined: Sep 2003
Posts: 99
F
Enthusiast
OP Offline
Enthusiast
F
Joined: Sep 2003
Posts: 99
would this be a disaster? I've always mixed thru the JBL ref. spkrs in my studio. I'm now further along in age with a somewhat hearing impairment and am thinking a pair of good quality headphones (sen HD-4.5 BTNC) might work better for ME than the JBL's. would app anyones feedback
5string

Recording, Mixing, Performance and Production
Joined: Aug 2012
Posts: 11,811
Veteran
Offline
Veteran
Joined: Aug 2012
Posts: 11,811
Head phones are a great way to mix.

But, it depends on the headphones and how flat they are.
I mix everything using headphones - audio-technica ATH-M40fs.
They are great for mixing.

However.
When I've finished - gotten to where I think it is a "finished" mix...I then listen through studio monitors - Yorkville YSM-1.

Almost every mix needs some small amount of adjustment to get the best sound through the Yorkvilles - usually some bottom taken out of a few things and a bit of highs bumped in others.

Once I've done that and return to the headphones the improvement (from using the studio monitors as the final call) is obvious.

Recording, Mixing, Performance and Production
Joined: Sep 2001
Posts: 2,000
Veteran
Offline
Veteran
Joined: Sep 2001
Posts: 2,000
I have a reasonable set of speakers on my music pc but not monitor quality. I set them up with a commercial recording i like to get the eq right and then i know i'm comparing my mix with the professional one. But i mix mainly on a good set of headphones and then as floyd says try the mix on the speakers.

I also do a test by making an mp3 of the mix (yes I know p3 loses a lot according to purists but i can't really hear it!)

then i play the mp3 through my big hifi with an ipod. at each stage i might hear something to change and like floyd says the improvement usually show when i return to the headphones.

If i could afford a set of studio monitors and a dedicated studio listening environment I would probably just mix on the monitors. but i would also try it (as I used to when I was the client at professional recording sessions)on small speakers so i could judge what it sounded like on the tv or radio.

but i have a limited budget so i do the best i can. most of my stuff goes onto cds for personal use and i always have the option of remixing if after repeated listening i hear something i don't like.

and after all, i'm an amateur these days so as log as i can get a sound i'm happy with i'm quite content.

Recording, Mixing, Performance and Production
Joined: Dec 2013
Posts: 2,732
Veteran
Offline
Veteran
Joined: Dec 2013
Posts: 2,732
Hi Fivestring,

I love to listen in more than one environment on my mixes. I have a pair of JBL 8" Powered Monitors and a set of Sony MDR-7506 headphones that I use. The perfect tool to get a good and accurate response for both is the following:

Sonarworks Reference 4

For my speakers they provide a test mic to calibrate my JBLs to the room and it's bad frequencies. Then on the headphone side they have hundreds of headphone models to establish a flat response. I checked the Sennheiser model you are looking to buy and they do offer a preset for that model.

This tool isn't required when using headphones but it does go a long way into improving the sound when you do have to use them.

The software is free to try so you can test with the headphones you do get and see if it helps you. My two cents.

Good Luck with your headphone shopping!




Steve

BIAB/RB 2022, Pro Tools 2020, Korg N5, JBL LSR 4328 Powered Monitors, AKG/Shure Mics.
PC: Win11 PRO, 4 TB M2 SSD, 2 TB HD, 128 GB Memory
Recording, Mixing, Performance and Production
Joined: May 2000
Posts: 21,664
Veteran
Offline
Veteran
Joined: May 2000
Posts: 21,664
Like floyd jane, I also like/recommend the ATH-M40fs headphones for audio work like mixing, editing, etc.
They are nice flat clear 'phones, and the price is more than acceptable.

I have noticed they need a little more drive than some other headphones (but not as much as the old AKG-240's) to sound nice and loud/clear.
I've owned other more expensive ATH headphones and have gladly traded them for the less expensive ATH-M40 pair. <grin>
The newer ATH-M40X are just as nice IMHO.

That said, I was not as impressed with the more expensive M50 or M60 line.
They pushed the bass frequencies (to me) making it harder to get an accurate mix.

Always check your mix in monitors too before calling it done, but there are times you need to mix in headphones, and the M40's allow you to do so pretty dang well.

Last edited by rharv; 05/13/20 04:14 PM.

Make your sound your own!
.. I do not work here, but the benefits are still awesome
Recording, Mixing, Performance and Production
Joined: Jul 2000
Posts: 25,971
Veteran
Offline
Veteran
Joined: Jul 2000
Posts: 25,971
I do the reverse - check my final mix in headphones, especially to find phase cancellation. But if my hearing were going, I think I would do what is recommended here: use flat closed headphones, then check the mix on monitors (and a boombox, and my car, and earpods etc.).

About flat response: when I was starting out, I had SONY 7506 cans. Still have them, several replacement pads later. But then I bought the next model up, the 7509, thinking they would be even better. Big mistake. The 7509 are nowhere near as flat, emphasizing the bass.


BIAB 2024 Win Audiophile. Software: Studio One 6.5 Pro, Swam horns, Acoustica-7, Notion 6; Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus Studio 192, Presonus Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors
Recording, Mixing, Performance and Production
Joined: Dec 2013
Posts: 2,732
Veteran
Offline
Veteran
Joined: Dec 2013
Posts: 2,732
Originally Posted By: Matt Finley
About flat response: when I was starting out, I had SONY 7506 cans. Still have them, several replacement pads later.

Same here. Replacements don't last quite as long as the originals did.




Steve

BIAB/RB 2022, Pro Tools 2020, Korg N5, JBL LSR 4328 Powered Monitors, AKG/Shure Mics.
PC: Win11 PRO, 4 TB M2 SSD, 2 TB HD, 128 GB Memory
Recording, Mixing, Performance and Production
Joined: Aug 2014
Posts: 7,870
Veteran
Offline
Veteran
Joined: Aug 2014
Posts: 7,870
I use something similar to what Steve mentioned re: Sonarworks. I have the Waves Abbey Road Studio 3 with AKG headphones. If I think I got the mix right, it is great to tell me if I really did it, and is reliable--to me, anyway. It usually tells me to turn up the drums. smile

No matter what I do though, I trust my meters, not my ears, and have numerous track templates and board templates for acoustics, electrics, drums, bass on and on, with many plugins tweaked for each instrument. I have found that meters rarely lie. When I get everything where I think it should be I run it through Abbey Road to hear how it all turned out. If it sounds great there, it sounds great on speakers. The last four songs I posted on the forum were done this way.

https://www.waves.com/plugins/abbey-road-studio-3#presenting-the-waves-abbey-road-studio-3-plugin



Recording, Mixing, Performance and Production
Joined: Mar 2018
Posts: 5,828
Veteran
Offline
Veteran
Joined: Mar 2018
Posts: 5,828
AKG K240 - budget (but great for the money) or AKG K240 MKII better Or K702... Very neutral and well balanced.

All above are semi-open backs. For some reason I get dizzy with closed back headphones.

Recording, Mixing, Performance and Production
Joined: Sep 2003
Posts: 99
F
Enthusiast
OP Offline
Enthusiast
F
Joined: Sep 2003
Posts: 99
hey guys - many many tks 4 the coaching,suggestions & replies. that gives me a lot more than i had to go on.

5stromg

Recording, Mixing, Performance and Production
Joined: Feb 2017
Posts: 3,414
PG Music Staff
Offline
PG Music Staff
Joined: Feb 2017
Posts: 3,414
Well there are pros and cons to mixing on headphones, same too with using monitors. Ideally speaking, using both is better. Or failing that, really knowing what sound you're going to get with what you're using and how to compensate for it.

I find panning and stereo imaging more difficult to gauge on headphones. Listening on cans is different to listening to speakers. Each ear only hears whats coming from the relevant channel, but with speakers both ears are hearing signal coming from both left and right channels. There are some timing differences here and it forms the basis of the stereo illusion (phantom image between speakers etc). With headphones you don't get this. Personally I never feel it to be a true stereo image.

But that's not to say it doesn't have it's uses for reference. Also if your room acoustics aren't great then headphones can provide a good option. Really though, it's about getting to know the response of the headphones and accommodating for it.


Cheers,
Deryk
Recording, Mixing, Performance and Production
Joined: Dec 2011
Posts: 14,223
Veteran
Offline
Veteran
Joined: Dec 2011
Posts: 14,223
I agree Deryk. For me the panning sounds dramatically different with phones. My process, FWIW, is to mix with our KRK’s and then listen on our larger living room system that has a sub and on our mono HomePod. If it sounds “good” on all them I stick a fork in it.

One caveat is that with so many folks listening nowadays with earbuds I may well be missing something needed. Dunno. And, BTW, did I mention my old ears are shot? smile

Bud

Recording, Mixing, Performance and Production
Joined: May 2000
Posts: 21,664
Veteran
Offline
Veteran
Joined: May 2000
Posts: 21,664
The above posts are true; you have to learn your equipment and not trust one source when mixing.
Play the resulting mix everywhere you can (phone, car, home theater, studio monitors etc) and then judge.
But also learn what your original mixing source 'caused'.
This is part of the 'Learn To Trust Your Ears' concept;

If your headphones produce too much bass, and thus you lower the bass in the mix, but then it sounds tinny everywhere else .. well you learned something.
Your headphones are bass heavy.

Once you learn this you can either;
1. compensate moving forward
2. get headphones that don't produce too much bass

Once this is solved, learning how to 'hear' the image in the headphones as far as stereo becomes a much more solvable task.
Simple example: import your end result stereo wav file into RB to two separate mono channels .. and pan them to less of a 100% R/L mix. In RB you would (for instance) set the panning for the L/R to 60 and -60 to bring the image (perceived appearance of the stereo field) a little more narrow.

Just because you use headphones doesn't mean you can't test your mix in differing 'live' scenarios, or at least approximate it.
But even then, go listen in the car, living room, phone .. anywhere a real person may listen. You can't cover every possible scenario (there is no 'BrowserStack for Audio' where you can test on multiple devices at will) but we can try by testing with everything we have. <grin>


Make your sound your own!
.. I do not work here, but the benefits are still awesome
Recording, Mixing, Performance and Production
Joined: Oct 2008
Posts: 18,999
Veteran
Offline
Veteran
Joined: Oct 2008
Posts: 18,999
Originally Posted By: floyd jane
Head phones are a great way to mix.

But, it depends on the headphones and how flat they are.
I mix everything using headphones - audio-technica ATH-M40fs.
They are great for mixing.

However.
When I've finished - gotten to where I think it is a "finished" mix...I then listen through studio monitors - Yorkville YSM-1.

Almost every mix needs some small amount of adjustment to get the best sound through the Yorkvilles - usually some bottom taken out of a few things and a bit of highs bumped in others.

Once I've done that and return to the headphones the improvement (from using the studio monitors as the final call) is obvious.

This is my approach too.

I use headphones to zero in on an initial mix. I use the same headphones as floyd. Then I alternate between headphones and speakers until both sources sit comfortably with me when I A/B them.

For the final test, I leave the mix for at least 24 hours and test it first thing in the morning before I have heard any other music. I've found that when my ears are rested and refreshed, I more clearly hear the mix.


MY SONGS...
Audiophile BIAB 2024
Recording, Mixing, Performance and Production
Joined: Dec 2003
Posts: 21,089
Veteran
Online Content
Veteran
Joined: Dec 2003
Posts: 21,089
It really doesn't matter what you use as long as you know what the end product sounds like on various playback systems. I have a friend who produces great sounding covers, regardless of the playback system, and he uses his home stereo system's speakers for monitors. He knows what settings to use when he is recording.


You know you're getting old when a recliner and a heating pad is your idea of a hot date!

64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
Recording, Mixing, Performance and Production
Joined: May 2017
Posts: 1,682
Expert
Offline
Expert
Joined: May 2017
Posts: 1,682
Agree with Mario's friend, I have my home hi fi next to pc, to listen to music from pc and to hear myself recording , mixing and mastering.

Most of what we listen to music from is a hi fi source, so I need to know how it will sound through the hi fi source.

I use the beyerdynamics dt770 headphones.

It is good to know folks set up as You always live and learn.

I have had numerous flat response monitors active and passive and I've always went back to my Arcam hi fi set up.

Last edited by beatmaster; 05/15/20 04:09 AM.

win 10 64 bit 16gb,i7 chip, ssd 500gb, m-audio air, ,Roland BK-7M, 1000,shure sm7b,sonar,acid,mixcraft, variety of plugins.Sample tank 3,Kontakt. TC Helicon Voicelive 3 2 .
https://beatmaster1.bandcamp.com/releases

Previous Thread
Next Thread
Go To

Link Copied to Clipboard
ChatPG

Ask sales and support questions about Band-in-a-Box using natural language.

ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.

PG Music News
User Video: Band-in-a-Box® + ChatGPT = Impressed the BOSS!

Since AI is now readily available online as a resource for many things, we recently put together and shared a video where we demonstrated how to create a song using Band-in-a-Box®, ChatGPT, and Synth V; we've also shared a Bob Doyle Media video, Convert MIDI Chords into AI Vocal Harmonies with ACE Studio and Band in A Box, showing how they utilize AI for their song projects. Now it's time to share Henry's video, Band-in-a-Box + ChatGPT = Impressed the BOSS!, where he demonstrates how to use ChatGPT and Band-in-a-Box to whip a song project together in only 3-4 hours.

Watch the video.

Visit Henry Clarke's YouTube Channel, Henry Clarke - Senior Musicians Unite, to find a large collection of tutorials showing the viewer how to achieve amazing results using Band-in-a-Box®!

Band-in-a-Box User Video Tutorials!

If you've reviewed our Support page, you've probably noticed the Videos page, which separates our Band-in-a-Box® tutorial videos by category: Overview, VST DAW Plugin, Setup, Beginner, Intermediate, Advanced, and there's even an Archive category to go down memory lane... (You'll also find these videos on our YouTube Channel.)

It's always great to hear how other Band-in-a-Box® users create their songs, especially when they explain in detail what they're doing. Like Henry Clarke's YouTube Channel, Henry Clarke - Senior Musicians Unite! There you'll find his ALL Band-in-a-Box Tutorials playlist with over 50 videos! His top-three most watched videos include "How to Get Started with Band-in-a-Box," "How I use the Audio Chord Wizard in Band-in-a-Box," and "How to Create An Effective Solo Using Band-in-a-Box" - however he touches on many other topics and also demonstrates his own Band-in-a-Box® songs in the Band-in-a-Box Created Songs playlist!

You're guaranteed to find some helpful videos when you visit Henry Clarke's channel!

Band-in-a-Box® 2024 Italian for Windows is Here!

Ci siamo dati da fare e abbiamo aggiunto oltre 50 nuove funzionalità e una straordinaria raccolta di nuovi contenuti, tra cui 222 RealTracks, nuovi RealStyles, MIDI SuperTracks, Instrumental Studies, "Songs with Vocals" Artist Performance Sets, Playable RealTracks Set 3, Playable RealDrums Set 2, due nuovi set di "RealDrums Stems", XPro Styles PAK 6, Xtra Styles PAK 17 e altro ancora!

Tutti Pacchetti | Nuove Caratteristiche

Band-in-a-Box® 2024 French for Windows is Here!


Band-in-a-Box® 2024 apporte plus de 50 fonctions nouvelles ainsi qu'une importante de contenus nouveaux à savoir : 222 RealTracks, des RealStyles nouveaux, des SuperTracks MIDI, des Etudes d'Instruments, des Prestations d'Artistes, des "Morceaux avec Choeurs", un Set 3 de Tracks Jouables, un Set 2 de RealDrums Jouables, deux nouveaux Sets de "RealDrums Stems", des Styles XPro PAK 6, des Xtra Styles PAK 17 et bien plus encore!

Tous Packages | Nouvelles Fonctionnalités

Video: Making a Song with Band-in-a-Box®, ChatGPT, and Synth V

Take your Band-in-a-Box® project to a whole new level when you incorporate ChatGPT and Synth V to add lyrics and vocals to your song!

We wanted to demonstrate how this is done with our video, where we show you how to go from nothing to a finished "radio ready" modern pop song by combining the features of Band-in-a-Box®, ChatGPT, and Synth V!

Listen to the finished song, so you get a listen to the finished product: https://demos.pgmusic.com/misc/behindthefame.m4a

If you like it, watch the video. Either way, let's hear your comments!

Henry Clarke: Revolutionize Your Band-in-Box® Tracks with Regenerating Function

One of the new features added with Band-in-Box® 2024 is the Tracks Window, which will look familiar if you've worked with other DAWs.

Henry Clarke explains why he loves the Re-generation function within the Tracks Window in their video Revolutionize Your Band-in-Box® Tracks with Regenerating Function.

Watch video.

Learn even more about what the Tracks Window can do with our video Band-in-a-Box® 2024: The Tracks Window.

User Video: Convert MIDI Chords into AI Vocal Harmonies with ACE Studio and Band-in-a-Box®

The Bob Doyle Media YouTube channel is known for demonstrating how you can creatively incorporate AI into your projects - from your song projects to avatar building to face swapping, and more!

His latest video, Convert MIDI Chords into AI Vocal Harmonies with ACE Studio and Band-in-a-Box, he explains in detail how you can use the Melodist feature in Band-in-a-Box with ACE Studio. Follow along as he goes from "nothing" to "something" with his Band-in-a-Box MIDI Melodist track, using ACE Studio to turn it into a vocal track (or tracks, you'll see) by adding lyrics for those notes that will trigger some amazing AI vocals!

Watch: Next-Level AI Music Editing with ACE Studio and Band-in-a-Box


Forum Statistics
Forums65
Topics81,924
Posts739,766
Members38,646
Most Online2,537
Jan 19th, 2020
Newest Members
JazzMan01, kssyblls01, maxtern, 1Oleg1, Delta 8 Austin
38,645 Registered Users
Top Posters(30 Days)
MarioD 163
musocity 103
DC Ron 97
rsdean 95
Today's Birthdays
There are no members with birthdays on this day.
Powered by UBB.threads™ PHP Forum Software 7.7.5