here's the walk through i promised. before you start BIAB plug the behringer in with a usb lead. open BIAB. go to options in the menu bar and choose preferences. choose audio and then from the drivers drop down choose ASIO. you should see your behringer driver - UMCASIO. click it.input on left is already selected then on the right select out 1 and out 2. don't bother with the asio driver control panel the default should be fine. click ok - you might get a yellow box saying default audio has changed. ignore it. close the preferences panel by clicking ok. plug your headphones into the behringer (phones will eliminate any problem in your amp/speaker chain). load a BIAB track - preferably one using all RTs as this eliminates any dud sounds a poor quality synth might be creating. press play and what you hear should be fine.

i've just done these steps with my behringer and the sound is great. let us know if following these step EXACTLY cures the problem. it works fine for me without changing any asio buffers at all - default works fine for me. but if you still have problems try the buffers.

Last edited by Bob Calver; 07/19/20 04:48 AM.