seems to me there are two possible causes (and maybe a remote third see later).

it would also help if you kept the same thread as there are now three threads with variations of the same problem.

referring to another thread if you use the behringer ASIO driver you shouldn't get the notice about rates not matching.

as Matt says you thought the behringer should be returned. with the problem you are having i think there are two possible explanations. first you are using the wrong behringer asio driver (you referred to two different ones in another thread) . as far as i know there is only one correct one here.........

https://www.behringer.com/downloads.html

and that is for windows 7 and 10 - select your unit from the various menus.

second issue is that the behringer is indeed faulty. as i understand it you have two laptops (again referenced in another thread) and you think one works fine - but not the new one. so if you follow my instructions above about how to connect the behringer on the old laptop (you'll need to install the driver if you haven't already and please follow them exactly as then i know we have eliminated some of the variables) does the behringer work with the old lap top? if it doesn't then we can assume the unit is the problem.

the third and remote possibility for odd sound that you are getting on the new laptop is feedback from the laptop mic. again in another thread you refer to the mic as having a different rate. when you are using the WAS drivers mute it in windows control panel and see if that cures the problem.

finally, the behringer asio driver is not creating a problem as you describe in another thread. it works with the behringer unit so if the unit is not plugged in the driver has nothing to work with so of course there's no sound. so you have to return to WAS. my pc does that automatically but obviously your doesn't. its not a fault it's just how things work.

be methodical. eliminate the wrong driver and faulty unit scenarios as I describe. the process i described above will also eliminate any midi synth problems and speaker chain issues. using the WAS driver mute the microphone and eliminate that issue.

let us know how you get on but please stick to one thread.


Last edited by Bob Calver; 07/19/20 11:29 PM.