How to get B&B not to crash with ASIO Driver

Here’s how I set up ASIO in B&B and stop it from crashing.

On the menu bar “Opt” -> “MIDI/Audio” -> now click on the “Audio Setup (MME)” button then another menu window will appear. Where it says “Audio Driver type” select “ASIO” and another window menu appears and you should see listed your ASIO interface click on this (in my case its UA-4FX) you should see the IN and OUT ports then get listed. Also now click “ASIO always ON”. Now click OK on this menu and then click OK on the next menu window. Now look at the final menu (this was the first one to come up). You should see on the bottom right hand corner the button has changed to “Audio Settings ASIO (Always)”.

NOW here is the CRITICAL final step. Instead of clicking OK on this menu click the little cross at the top right hand corner of this window menu. If you do not do this and click OK you’ll get (At least I do) a transparent white screen (i.e. B&B crashes).

Let’s see how many folks this works for.

Cheers F