|
Log in to post
|
Print Thread |
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Feb 2009
Posts: 95
Enthusiast
|
OP
Enthusiast
Joined: Feb 2009
Posts: 95 |
Some months ago I had a problem with the very low audio input recording level that others have had with BIAB. So I disoposed of my USB mic, bought a mixer and compressor, and I've just got this up and working - but with the same problem.
When I want to record a vocal over a BB2010 track, *I check the record levels, and both record levels are fine for the song*. I even have to drop the slider on my mixer a little to keep it out of the red (I'm avoiding using the limiter). But when I come to play back what I've recorded, all I get is a tiny quiet voice in the background behind the music.
All details are below, but my mixer has a 24-bit audio box supplied with it. I've tried using the standard windows USB Audio Codec, the ASIO4All, and most recently the Behringer model-specific Audio Codec in both ME and ASIO, but without any more success.
Playback of the midi/RealTracks music through the mixer and speakers is fine. If I up the main mix sliders when the mic is open, my voice comes across perfectly over the speakers. Because the record-level meter for the voice input shows as perfect, it has to be something about the record process itself.
- I have a Behringer 1222FX, tied in to an Composer Pro MDX2200 (though I've tried it without), with a Behringer UCA-200 audio box. Because I don't have a set of jack to phono leads, the output from the sound box is fed back in to the input phonos on the mixer.
- I've checked Windows control panel. The sound box is showing in the Device Manager audio listing, for which properties shows both driver and mixer as working properly. Sounds and Audio devices shows the sound recording and playback device correctly selected (Windows default or Behringer depending on which I'm trying). The windows default had no mixer capability, but this is apparently added by the Behringer driver, and the record volume is set at max, not muted, and all the sliders are set to high. 20db boost is added in advanced settings. The hardware test gives a positive result.
- In BB Preferences > Audio Settings, Behringer USB Audio is selected for both audio input and output, and the settings imported from the soundcard fine.
- But when I come to record, and click on the button to set the recording level or tst the recording level meter, I get the error: "There is a problem with your sound hardware. To install mixer drivers, go to Control Panel, Add Hardware, click printer and other hardware, and then click audio hardware." When I do this, it lets me select the Behringer driver again, but says it's installed and working correctly! I've tried rebooting, but it makes no difference.
I'm running Windows XPSP3 and BB2010 Build 295 on a 2793MHz Pentium D dual core processor with 8Gb RAM.
Why does everything on the system tell me it's working correctly, but in both error messages about a missing mixer and in the resulting low volume, BB makes it clear that it's not?
Curious - help appreciated!
Last edited by Digihound; 02/25/10 10:56 AM.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: May 2008
Posts: 409
Journeyman
|
|
Journeyman
Joined: May 2008
Posts: 409 |
Hi Digihound, Hopefully, some of the heavyweights here will kick in with some good advice. I can't quite get my head around how you are trying to set things up, lol. In the meantime, this might be some good reading. http://www.free-instrumentals.com/behringeruca200.htmlHope this helps. Jim
I'd be completely happy if I had just one more guitar.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Dec 2007
Posts: 235
Apprentice
|
|
Apprentice
Joined: Dec 2007
Posts: 235 |
You need to look at the levels of your recorded voice track with a separate program and see if they are very low. Audacity is free and I think will do this. Maybe Real Band will do this also, I'm not sure. If the levels are OK, then it's a problem with the level settings on playback.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Jul 2000
Posts: 1,696
Expert
|
|
Expert
Joined: Jul 2000
Posts: 1,696 |
If your vocal is on a track in RB, then the audio edit window in RB has a db scale on the left side.If you use the arrows on the bottom or left of the audio edit window, you can scroll through the track and check the overall level of the vocal.
If you determine it needs a volume boost, highlight the whole track, go to Edit - Audio Effects - Gain Change then boost it the required dbs - this may not solve your initial problem but it will allow you to bring your vocal audio up.
Cheers - Ian
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: May 2002
Posts: 7,415
PG Music Staff
|
|
PG Music Staff
Joined: May 2002
Posts: 7,415 |
Hi, Quote:
- But when I come to record, and click on the button to set the recording level or tst the recording level meter, I get the error: "There is a problem with your sound hardware. To install mixer drivers, go to Control Panel, Add Hardware, click printer and other hardware, and then click audio hardware." When I do this, it lets me select the Behringer driver again, but says it's installed and working correctly! I've tried rebooting, but it makes no difference.
There is most likely not a problem audio device. Band-in-a-Box is just trying to launch the Windows Record Control Mixer (same as if you double-click the speaker icon in your task bar and go to Options-Recording), and your sound card apparently doesn't use that. Instead, you can probably set this in your sound card's software.
Quote:
When I want to record a vocal over a BB2010 track, *I check the record levels, and both record levels are fine for the song*
Where are you checking this? Are you looking at the Band-in-a-Box VU meters?
Andrew
PG Music Inc.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Mar 2010
Posts: 2
Newbie
|
|
Newbie
Joined: Mar 2010
Posts: 2 |
I am having the same problem with my audio recording level in BB2010. The VU meter indicates as much and more vocal volume being recorded relative to the instrument tracks, but on playback I can barely hear the voice.
You said, "go to Edit - Audio Effects - Gain Change", but I can't find those commands anywhere and there is no mention of gain in the index. Any help would be appreciated.
Edit ------------------
Never mind, I found the correct command sequence:
Audio -> Edit Audio -> Adjust level of region of Wave file (permanent)
Then enter the number of dB to increase the vocal track level.
Last edited by BobbyD; 03/07/10 08:33 PM.
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
Video: Band-in-a-Box® 2025 for Mac®: VST3 Plugin Support
Band-in-a-Box® 2025 for Mac® now includes support for VST3 plugins, alongside VST and AU. Use them with MIDI or audio tracks for even more creative possibilities in your music production.
Band-in-a-Box® 2025 for Macs®: VST3 Plugin Support
Video: Band-in-a-Box® 2025 for Mac®: Using VST3 Plugins
Join the conversation on our forum.
Band-in-a-Box 2025 for Mac Videos
With the release of Band-in-a-Box® 2025 for Mac, we’re rolling out a collection of brand-new videos on our YouTube channel. We’ll also keep this forum post updated so you can easily find all the latest videos in one convenient spot.
From overviews of new features and walkthroughs of the 202 new RealTracks, to highlights of XPro Styles PAK 8, Xtra Styles PAKs 18, the 2025 49-PAK, and in-depth tutorials — you’ll find everything you need to explore what’s new in Band-in-a-Box® 2025.
Reference this forum post for One-Stop Shopping of our Band-in-a-Box® 2025 Mac Videos — we’ll be adding more videos as they’re released!
Band-in-a-Box 2025 for Mac is Here!
Band-in-a-Box® 2025 for Mac is here, packed with major new features and an incredible collection of available new content! This includes 202 RealTracks (in Sets 449-467), plus 20 bonus Unreleased RealTracks in the 2025 49-PAK. There are new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 4, two new sets of “RealDrums Stems,” XPro Styles PAK 8, Xtra Styles PAK 19, and more!
Special Offers
Upgrade to Band-in-a-Box® 2025 for Mac with savings of up to 50% on most upgrade packages during our special—available until July 31, 2025! Visit our Band-in-a-Box® packages page for all the purchase options available.
2025 Free Bonus PAK & 49-PAK Add-ons
We've packed our Free Bonus PAK & 49-PAK with some incredible Add-ons! The Free Bonus PAK is automatically included with most Band-in-a-Box® for Mac 2025 packages, but for even more Add-ons (including 20 Unreleased RealTracks!) upgrade to the 2025 49-PAK for only $49. You can see the full lists of items in each package, and listen to demos here.
If you have any questions, feel free to connect with us directly—we’re here to help!
Band-in-a-Box 2025 Italian Version is Here!
Cari amici
È stata aggerate la versione in Italiano del programma più amato dagli appassionati di musica, il nostro Band-in-a-Box.
Questo è il link alla nuova versione 2025.
Di seguito i link per scaricare il pacchetti di lingua italiana aggiornati per Band-in-a-Box e RealBand, anche per chi avesse già comprato la nuova versione in inglese.
Band-in-a-Box 2025 - Italiano
RealBand 2025 - Italiano
Band-in-a-Box 2025 French Version is Here!
Bonjour à tous,
Band-in-a-Box® 2025 pour Windows est disponible en Français.
Le téléchargement se fait à partir du site PG Music
Pour ceux qui auraient déjà acheté la version 2025 de Band-in-a-Box (et qui donc ont une version anglaise), il est possible de "franciser" cette version avec les patchs suivants:
BIAB 2025 - francisation
RealBand 2025 - francisation
Voilà, enjoy!
Band-in-a-Box 2025 German Version is Here!
Update Your Band-in-a-Box® 2025 to Build 1128 for Windows Today!
Already using Band-in-a-Box 2025 for Windows®? Download Build 1128 now from our Support Page to enjoy the latest enhancements and improvements from our team.
Stay up to date—get the latest update now!
|
|
|
|
|
|
|
|
|
|
|
|
Forums58
Topics84,298
Posts777,442
Members39,614
| |
Most Online25,754
Jan 24th, 2025
|
|
|
|
|
|
|
|
|
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean