More tests this morning between Realband 2018 (5) and Realband 2021 (3) 64 concerning PG's Peak Limit. I would say the Peak Limit for Realband 2021 (3) 64 is not working correctly and I certainly cannot believe the level indicators within the peak limit vst.

I tested different songs and different tracks both mono and stereo tracks and the Peak Limit in RB 2021 (3) 64 is not working correctly in the track view at least. Realband 2018 (5) has no issue with the Peak Limit VST.

The screen shot below shows Peak Limiter action on Vocal tk3 track RB 2021 (3) 64. Notice there is no activity on the middle column of the peak limiter right below the word 'clip' also notice both left and right peak indicators are lit red indicating clipping. The limiter is set for 3db pregain and -1db output gain. Under these conditions, there should not be any clipping in my opinion if the limiter is working and the output level indicators should never rise above -1db.

In my old version of RB 2018, the middle column under the word 'Clip' would light up and move around indicating that the limiter was working and folding back the gain so there would be no clipping the two small indicators on each side of the word 'clip' would never light up with these settings.

Attached Files (Click to download or enlarge) (Only available when you are logged in)
Peaklimit2.jpg (253.21 KB, 114 downloads)
Last edited by Del; 02/03/21 07:32 AM.
Del