Quote:
the input and output sample rates don't match.


This is referring to your Software (BIAB) and your hardware (Wins or your external sound device) transfer of data. If it is not the same you will hear some garbled or popping or screeching noises. The message is telling you to make an adjustment so they are sending and receiving at the same rate (KHz).

Their are three common options, 48kHz and 44.1kHz and 96 kHz. These settings can be easy to find or not. Depending on your system. My Motu Audio Express is smart and can self correct based on what the software is using. So I have not had this issue in a long time. I do believe for years BIAB was 44.1 but in 2020 gave us all three options.

Hope this helps. Should be a simple setting fix.



Attached Files (Click to download or enlarge) (Only available when you are logged in)
Capture.JPG (34.79 KB, 52 downloads)

BIAB – 2025, Reaper (current), i7-12700F Processor, 32GB DDR4-3200MHz RAM, Motu Audio Express 6x6 - My SoundCloud (Tip: No need to create a SC account to hear music - just hit ESC ).