I have a song that has a trombone as the melody instrument ... or claims it does. It's in the mixer, it's in the notation. There's no instrument embedded in the MIDI events.
BIAB plays a piano.
I've tried re-entering the trombone, I've tried using the GM2 trombone 2, I've tried removing the MIDI instrument and then setting the trombone, I've tried changing styles.
BIAB still plays piano.
I've tried soloing the track, BIAB plays piano including for the metronome (OK). If I mute the melody track, the melody no longer plays, as I would expect expect.
I've tried muting some or all of the other tracks. I've tried a variety of other instruments
BIAB plays piano.
Am I being dumb or is there something very wrong? It should not be this hard to set a melody instrument.
Jazz relative beginner, starting at a much older age than was helpful. AVL:MXE Linux; Windows 11 BIAB2025 Audiophile, a bunch of other software. Kawai MP6, Ui24R, Focusrite Saffire Pro40 and Scarletts .
Ya, for sure, what Matt said, post the song so we can ty it. Some midi has embedded code which sets a specific patch (instrument) as the song plays - you therefore have to remove that if you want to set it to something different. Its a midi thing.
If the Return to Factory settings does not give you what you want, there probably is a MIDI command on the melody ytrack telling your MIDI sound source to play a piano.
If that's the case, open the song in RealBand, let RealBand fully load. Click on the melody track to highlight it, then click on Event List in the middle of the top line of RealBand. This will open up a listing of all MIDi events in that track including program changes, notes, continuous controls, etc.
At the very top of the Event List look for an event called Program with a number following it...if it's General MIDI it will be Program 1 if its an acoustic grand you're hearing.
Nonetheless, delete that line using the MIDI Event List. Then do a file "Save AS' and save the song as a BIAB file (X.mgu). Then open up the song in BIAB and see if that patch has been deleted.
Post the song for us to take a look. But first, try Options, Return to Factory Settings, Most.
Doing the Factory Reset->Most made no difference.
I guess I send it by email? I've never done that to PGM, so my apologies in advance if I do it the wrong way. I'll try "email reply" first. If that fails, I'll email support with a note.
Originally Posted By: MusicStudent
Ya, for sure, what Matt said, post the song so we can ty it. Some midi has embedded code which sets a specific patch (instrument) as the song plays - you therefore have to remove that if you want to set it to something different. Its a midi thing.
There's no instrument selection in at least the first few dozens of midi events. I didn't look right through, but can if it may help.
Jazz relative beginner, starting at a much older age than was helpful. AVL:MXE Linux; Windows 11 BIAB2025 Audiophile, a bunch of other software. Kawai MP6, Ui24R, Focusrite Saffire Pro40 and Scarletts .
I have had the same problem - it was due to the midi channel not being selected.
midi channel was set to 0 and my tts1 (edirol hypercanvas)defaulted to piano. maybe the OP has the same problem. it was easy to fix in RB but i'm not sure how to do it in BIAB.
my old thread is here but in the meantime maybe someone could help the OP select a midi channel? mike head posted that this would happen on all GM synths.
Ya, the midi channels are miss-aligned. Although it all played fine with my VSTSynthfont.
So by default BAIB puts the Melody on channel 4 and Piano on Channel 3. But this song has the Melody on Channel 3. Now VSTSynthfont was smart enough to recognize this and played the Trombone correctly through the whole song. But I suspect the midi synth you are using is sending this to channel 3 with a piano default.
May need a more mididiot to explain this situation. I would say BIAB has mixed channels 3 and 4, but I hate to pull that trigger to fast. Although, I believe this same issue was seen in the recent past and had been fixed. Hard to keep up with the changes. But perhaps others can explain what exactly is going on here.
I found the above MIDI settings and see the same data (at least at the relevant points), but I'm a little puzzled by your comment above.
If I use Melody->Edit Melody Track->Step edit melody, that appears to show the melody on channel 6, not channel 3. Either way, how best cam one change the melody from wherever it is at present to channel 4, please?
I guess lower-right window in your image, showing channel 3, is the VSTSynthfont plugin.
Jazz relative beginner, starting at a much older age than was helpful. AVL:MXE Linux; Windows 11 BIAB2025 Audiophile, a bunch of other software. Kawai MP6, Ui24R, Focusrite Saffire Pro40 and Scarletts .
If I use Melody->Edit Melody Track->Step edit melody, that appears to show the melody on channel 6, not channel 3.
Ya, I see the channel 6 designation in the file, but I have a strings patch in VSTSynthfont on channel 6 and trombone on channel 3 is playing. Confusing??
Originally Posted By: Gordon Scott
Either way, how best can one change the melody from wherever it is at present to channel 4, please?
I wish I could tell you... we need someone to set us both straight. Otherwise, BIAB is messin with us both.
Originally Posted By: Gordon Scott
I guess lower-right window in your image, showing channel 3, is the VSTSynthfont plugin.
I guess lower-right window in your image, showing channel 3, is the VSTSynthfont plugin.
Ah, yes it is.
Jazz relative beginner, starting at a much older age than was helpful. AVL:MXE Linux; Windows 11 BIAB2025 Audiophile, a bunch of other software. Kawai MP6, Ui24R, Focusrite Saffire Pro40 and Scarletts .
Here is your file in the BIAB-VST. It identifies the Melody track on channel #4 (where it should be) and which I believe is at least part of the problem versus over in BIAB which has it on Channel #3.
Well, I downloaded the song and it plays fine. The trombone plays the melody, and Channel 4 (Melody) is correctly set to patch 58 for trombone.
[I muted the horn medley, as it just cluttered up things.]
Note that I'm using a hardware MIDI synth, a Roland Integra-7, if that helps.
Gordon, what is playing your MIDI sounds? The Korg? The Kawai? If so, have you found and loaded the correct patch map for it? These are not GM keyboards.
BIAB 2025 Win Audiophile. Software: Studio One 7 Pro, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus 192 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.
Thanks Matt, appreciate your input. Issue may be with the patch map as you suggest. My VSTsynthfont player identified the melody on Midi Channel #3, but played the trombone patch on it fine.
BIAB's GM instrument on whatever synth it was using(!)
I tried swapping to Sforzando and then the sound changed to the instrument I chose on it. I tried swapping back to GM, but it doesn't swap, it keeps playing Sforzando. I even tried "no midi patch" between choices, but although the L/H tab of the mixer shows these changes, the description continues to show Sforzando and that continues to play.
I guess(!) that BIAB was previously set to CoyoteWT. Changing to that pops up a window that shows a piano default on every channel. I tried changing ch3 to another instrument and ch6 to another instrument, but Sforzando continues to play.
I can patch to the Kawai. The reason I generally don't is that the notepad PC at the Kawai is too fiddly for anything more than minor tweaks. I rarely use the Korg, it's in its bag in the corner.
Last edited by Gordon Scott; 03/03/2107:46 AM.
Jazz relative beginner, starting at a much older age than was helpful. AVL:MXE Linux; Windows 11 BIAB2025 Audiophile, a bunch of other software. Kawai MP6, Ui24R, Focusrite Saffire Pro40 and Scarletts .
I tried swapping to Sforzando and then the sound changed to the instrument I chose on it. I tried swapping back to GM, but it doesn't swap, it keeps playing Sforzando.
Is the way the synth is used different between the Preferences->MIDI_Driver choice and choosing Sforzando (or whatever) from then mixer? I do find BIAB all a bit of a maze.
Last edited by Gordon Scott; 03/03/2107:52 AM.
Jazz relative beginner, starting at a much older age than was helpful. AVL:MXE Linux; Windows 11 BIAB2025 Audiophile, a bunch of other software. Kawai MP6, Ui24R, Focusrite Saffire Pro40 and Scarletts .
Maybe someone can check if there are any MIDI CC events that are forcing a specific MIDI channel. Sometimes that can cause issues until you remove the particular event.
Cari amici
È stata aggerate la versione in Italiano del programma più amato dagli appassionati di musica, il nostro Band-in-a-Box.
Questo è il link alla nuova versione 2025.
Di seguito i link per scaricare il pacchetti di lingua italiana aggiornati per Band-in-a-Box e RealBand, anche per chi avesse già comprato la nuova versione in inglese.
Band-in-a-Box® 2025 pour Windows est disponible en Français.
Le téléchargement se fait à partir du site PG Music
Pour ceux qui auraient déjà acheté la version 2025 de Band-in-a-Box (et qui donc ont une version anglaise), il est possible de "franciser" cette version avec les patchs suivants:
Band-in-a-Box 2025 für Windows Deutsch ist verfügbar!
Die deutsche Version Band-in-a-Box® 2025 für Windows ist ab sofort verfügbar!
Alle die bereits die englische Version von Band-in-a-Box und RealBand 2024 installiert haben, finden hier die Installationsdateien für das Sprachenupdate:
Update Your Band-in-a-Box® 2025 to Build 1128 for Windows Today!
Already using Band-in-a-Box 2025 for Windows®? Download Build 1128 now from our Support Page to enjoy the latest enhancements and improvements from our team.
Already using RealBand® 2025 for Windows®? Download Build 5 now from our Support Page to ensure you have the latest enhancements and improvements from our team.
PowerTracks Pro Audio 2025 is here! This new version introduces many features, including VST3 support, the ability to load or import a .FLAC file, a reset option for track height in the Tracks window, a taller Timeline on the Notation window toolbar, new freeze buttons in the Tracks window, three toolbar modes (two rows, single row, and none), the improved Select Patch dialog with text-based search and numeric patch display, a new button in the DirectX/VST window to copy an effects group, and more!
First-time packages start at only $49. Already a PowerTracks Pro Audio user? Upgrade for as little as $29!
Video: Summary of the New Band-in-a-Box® App for iOS®
Join Tobin as he takes you on a tour of the new Band-in-a-Box® app for iOS®! Designed for musicians, singer-songwriters, and educators, this powerful tool lets you create, play, and transfer songs effortlessly on your iPhone® or iPad®—anytime, anywhere.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean