..How about being able to swap upper bar with song block view? see attached.
With all the new tracks and users wanting them to converge with standard tracks there could be accessed from the Bars window or Mixer. This way as you say you could display the song regions and clicking that region it would zoom it, and it would work like a Tab that Old Muso wanted:
To keep the option to show Tracks or Regions we can make the Track scroll to show them all, and when you mouse wheel over it, it will scroll left/right and do the same with the regions display, arrow at each end and mouse scroll: Full Screen
All these mock ups, I think it would have been quicker doing the code. So you could have the top bar view config on the left and the C7 drag Midi chords with region name markers or chord name markers, configured by right click. What else does it need ?
going back to bars view for a moment, i feel there would be less "toing" and "froing" between daw and biab if bars view were enhanced BECAUSE bars view lets one move bits of midi and audio around so very easily. and "experiment" at different time slots. there is just so much arrange flexibility in bars view.
one minor thing. i feel slide is a far more flexible feature then push. cos in the past if i couldnt get push to work the way i wanted, what i would do is "slide" the bit of midi from biab in the daw.
nice ideas pipeline. but will we ever see them implemented ?
best old-downhill skier/slider-muso.
Last edited by justanoldmuso; 04/01/2101:44 AM.
my songs....mixed for good earbuds...(fyi..my vocs on all songs..) https://soundcloud.com/alfsongs (90 songs created useing bb/rb.)
..going back to bars view for a moment, i feel there would be less "toing" and "froing" between daw and biab if bars view were enhanced BECAUSE bars view lets one move bits of midi and audio around so very easily. and "experiment" at different time slots. there is just so much arrange flexibility in bars view.
one minor thing. i feel slide is a far more flexible feature then push. cos in the past if i couldnt get push to work the way i wanted, what i would do is "slide" the bit of midi from biab in the daw....
What do you need "ENHANCED" in Bar view ?
I put a slider in Rusty's F5 to "Slide" the Push & Holds is this what you mean ? Full Screen
Currently the Util Tracks are just able to generate RealTracks using the Soloist RT generator window. You will need all the Generate options RT RD MST UT Loop.. with the Multi Tab Picker , when you right click "Choose Instrument Change for Selection" it will bring up the Multi Tab Picker. So in the pic it will show where there is a track change and the name, the name will be offset if there is a Hold Shot etc.. So I can select the bars where the UT changes and Regenerate any section of the UserTrack same with RT RD MST. Loops can be changed also in F5 or right click this will allow for another Loop or some Loops come with Holds Shots n Endings, so you can add these in. I have asked for Hold and Ending in the Loops dialog to set the associated Hold and Ending wav file.
What else do you need in the Right click dialog ? Full Screen
Another thing that came to me was the word Degenerate, this could allow you to go back anytime select a section that was previously generated over and select Degenerate to get the old one back as the new one is %^&* and the old was better.
Degenerate huh? I was thinking about something similar too, but in slightly different angle. To "generate a copy" straight to another track (Utility for example) or even better to "first available empty track", if they will have same functions as legacy tracks. That way you can hear both generations without having to re-generate anything and if you like parts of one and parts of other, you can keep both and mute things you do not want.... or delete one ... or..
Merge two tracks into one... keeping all the bar settings of each. With some kind of easy, "user friendly" mechanism. Select tracks right on mixer-> right click> merge selected.
I'm not sure if undo would put it back in but this way you can still do it even after other undos.
Yes, you can take it further than the simple Degenerate. Be able to select from previous generations with a right click even. If they can get over to that Play Direct method it would be just be storing the track section data from the previous generations that you can select from and it would instantly play it without it being in other track.
This showed up in a another thread and I tested it. You cannot Undo a Regenerate.
The workaround would be to keep saving versions under different names so you could always go back to a previous file. But as for a Degenerate function, +1.
As long as it refers to the program and not me.
BIAB 2025 Win Audiophile. Software: Studio One 7 Pro, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus 192 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.
Maybe a User Selectable Option that could be used so that every time a new generation is created, a backup is automatically created of the existing song, with an incremental file name convention: MySong_001.MGU MySong_002.MGU MySong_003.MGU MySong_004.MGU MySong_005.MGU etc...
This could be automatically saved in a 'backups' sub-folder from where the original song was loaded from. e.g. C:\MyMusicSongs\Backups\
BIAB & RB2025 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
Another thing that came to me was the word Degenerate, this could allow you to go back anytime select a section that was previously generated over and select Degenerate to get the old one back as the new one is %^&* and the old was better.
Originally Posted By: huertaaj
I pressed the Play+ button which generated a new version of the guitar RealTrack. I didn't freeze the track and now I can't go back to a previous version that I liked. No matter how many times I have pressed the Play+ button it just won't generate that same nice version again. Is the ANY way to control how BIAB generates a new version of the track each time you press Play+? If not, this is kind of sucky.
Band-in-a-Box® 2025 pour Windows est disponible en Français.
Le téléchargement se fait à partir du site PG Music
Pour ceux qui auraient déjà acheté la version 2025 de Band-in-a-Box (et qui donc ont une version anglaise), il est possible de "franciser" cette version avec les patchs suivants:
Band-in-a-Box 2025 für Windows Deutsch ist verfügbar!
Die deutsche Version Band-in-a-Box® 2025 für Windows ist ab sofort verfügbar!
Alle die bereits die englische Version von Band-in-a-Box und RealBand 2024 installiert haben, finden hier die Installationsdateien für das Sprachenupdate:
Update Your Band-in-a-Box® 2025 to Build 1128 for Windows Today!
Already using Band-in-a-Box 2025 for Windows®? Download Build 1128 now from our Support Page to enjoy the latest enhancements and improvements from our team.
Already using RealBand® 2025 for Windows®? Download Build 5 now from our Support Page to ensure you have the latest enhancements and improvements from our team.
PowerTracks Pro Audio 2025 is here! This new version introduces many features, including VST3 support, the ability to load or import a .FLAC file, a reset option for track height in the Tracks window, a taller Timeline on the Notation window toolbar, new freeze buttons in the Tracks window, three toolbar modes (two rows, single row, and none), the improved Select Patch dialog with text-based search and numeric patch display, a new button in the DirectX/VST window to copy an effects group, and more!
First-time packages start at only $49. Already a PowerTracks Pro Audio user? Upgrade for as little as $29!
Video: Summary of the New Band-in-a-Box® App for iOS®
Join Tobin as he takes you on a tour of the new Band-in-a-Box® app for iOS®! Designed for musicians, singer-songwriters, and educators, this powerful tool lets you create, play, and transfer songs effortlessly on your iPhone® or iPad®—anytime, anywhere.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean