What is the Kontakt patch you’re using?

I don’t use Studio One but it but what you’re describing sounds a lot like you’re not setting the “complete” automation lane or there is another lane needs to be set. Very common is to have the volume set in the Audio Output lane and MIDI Track automation not set. They are two different points.

CC7 usually shifts the little volume slider on the top right hand side of the Kontakt patch. It is normally somewhere about 50% along. Unfortunately not all patches behave the same way.

Other CCs are harder to see as such. Usually the help manual for the patch will discuss other required CCs. I use Cakewalk for most of my MIDI stuff. The CC automation usually appears as lines over the MIDI notes. Then in the piano roll view they are usually at the bottom (underneath) the notes or are viewable by looking at the MIDI automation lanes. Reaper is also similar and I would think Studio One would be similar.

It would be interesting to know your actual patch. Maybe just swap out the patch with any other patch as a test to see if I changes things. It could be an overall setting or possibly something just that patch needs.

I enjoy trying to get these things to behave.

Tony

Edit: added swapping the patch.

Last edited by Teunis; 03/31/21 11:28 AM.
HP i7-4770 16GB 1TB SSD, Win 10 Home,
Focusrite 2i2 3rd Gen, Launchkey 61, Maton CW80, Telecaster, Ovation Elite TX, Yamaha Pacifica 612
BB 2022(912) RB 2022(2), CakeWalk, Reaper 6, Audacity, Melodyne 5 Editor, Izotope Music Production Suite 4.1