PG Music Home Forums General Discussion Beginners Forum Best way to get a 2 bar count-in that overlaps with a chord pickup bar?

Index

Print Thread

Go To

Best way to get a 2 bar count-in that overlaps with a chord pickup bar? #663102 07/06/21 01:33 PM Beginners Forum
Joined: Jul 2020 Posts: 15 M MartinDorr OP Enthusiast
OP MartinDorr Enthusiast M Joined: Jul 2020 Posts: 15	Just restarting BIAB use after a 20+ year break. Well, a lot has has been added and there is a plenty to learn to use it to its fullest capabilities. … and it sure sounds a lot better too! That said, I seem to remember that there was a way to do partial 2-bar count-ins when a song starts with 1 or more pickup chords, but I haven’t found how to best go about doing this w/o loosing the built-in count-in features (e.g., producing or not producing MIDI for the count-in measures). I was able to change the first bar to have only as many beats as the pickup length, but there seems to be no way to shorten the count-in beats to match the pickup beats for a full measure. The default solution of just adding the count-in in front of the the full pickup bar creates 3 beats of silence for a 1-beat pickup chord, which is really not what a soloist would want to hear when he/she wants to come in on the pickup beat. Is there a simple solution or at least a better way to address this? Last edited by MartinDorr; 07/06/21 07:58 PM.

Re: Best way to get a 2 bar count-in that overlaps with a chord pickup bar? MartinDorr #663150 07/07/21 03:05 AM Beginners Forum
Joined: Oct 2020 Posts: 836 Chantelle - PG Music PG Music Staff
Chantelle - PG Music PG Music Staff Joined: Oct 2020 Posts: 836	Are you using a Mac or Windows computer? The options available for the lead-in are slightly different for each OS. Best, Chantelle

Re: Best way to get a 2 bar count-in that overlaps with a chord pickup bar? MartinDorr #663152 07/07/21 03:07 AM Beginners Forum
Joined: Sep 2001 Posts: 2,119 Essex England Bob Calver Veteran
Bob Calver Veteran Joined: Sep 2001 Posts: 2,119 Essex England	how finished will your song be? the reason i ask is that once you've done everything in BIAB - leaving the count in the same and with no need for further editing, if you open the BIAB file in Realband you can edit the file any way you choose. I'm assuming you get the count in for two bars and then the pick up is on beat 4 of bar 3 with silence on beats 1,2 and 3. delete bar 2 on all tracks so bar three become bar 2, and then copy and paste the first three count in beats from bar one to the new bar two before the pick up beat. should work! but don't forget you can still regenerate and mix and edit in RB so its not a once and for all decision. maybe its possible in BIAB but i'm so used to doing anything a little confusing in BIAB in RB because its obvious and much easier. I must admit when i had this issue singing live i just sang over the fourth beat in bar 2!

Re: Best way to get a 2 bar count-in that overlaps with a chord pickup bar? Chantelle - PG Music #663168 07/07/21 05:25 AM Beginners Forum
Joined: Jul 2020 Posts: 15 M MartinDorr OP Enthusiast
OP MartinDorr Enthusiast M Joined: Jul 2020 Posts: 15	Originally Posted By: Chantelle - PG Music Are you using a Mac or Windows computer? The options available for the lead-in are slightly different for each OS. Just downloaded the latest UltraPAK+ version for MAC a week ago

Re: Best way to get a 2 bar count-in that overlaps with a chord pickup bar? MartinDorr #663181 07/07/21 07:42 AM Beginners Forum
Joined: Oct 2020 Posts: 836 Chantelle - PG Music PG Music Staff
Chantelle - PG Music PG Music Staff Joined: Oct 2020 Posts: 836	If you go to Options \| Preferences, on the left hand side of the window you'll see there are different settings for the lead-in. You can change the type of instrument, the pattern, and volume of the lead-in. RealBand is a Windows only application. So the above suggestion by Bob for further editing in RealBand would alternatively work in other DAWs that are compatible for Mac, like Garageband. Best, Chantelle

Re: Best way to get a 2 bar count-in that overlaps with a chord pickup bar? Chantelle - PG Music #663239 07/07/21 04:20 PM Beginners Forum
Joined: Jul 2020 Posts: 15 M MartinDorr OP Enthusiast
OP MartinDorr Enthusiast M Joined: Jul 2020 Posts: 15	Thanks for all the tips. If possible, I’d prefer a solution within BIAB and not be forced to patch things up in a DAW. Originally Posted By: Chantelle - PG Music If you go to Options \| Preferences, on the left hand side of the window you'll see there are different settings for the lead-in. You can change the type of instrument, the pattern, and volume of the lead-in. ... Chantelle, I explored your suggestions but did not find a solution to my stated goals. I do have a few follow-up questions though: 1. It seems the Options \| Preference window defines global preferences, i.e., any song-specific adjustments would not necessarily work for other songs. 2. The song-specific preferences do not support specifying a count-in pattern; only a lead-in type is selectable per song (though it’s called ‘Drum Count-in’) 3. The purpose/function of the ‘Allow Lead In Bars’ is unclear. I hear lead in counts with it enabled or disabled and it does not produce any lead in bars as far as I can tell. Can you elaborate what enabling/ disabling actually does? 4. How do I add a Melody pickup that is muted to take advantage of the smart lead in option before my first measure with chords? Hope I amd not asking too much Last edited by MartinDorr; 07/07/21 06:40 PM.

Re: Best way to get a 2 bar count-in that overlaps with a chord pickup bar? MartinDorr #663243 07/07/21 05:46 PM Beginners Forum
Joined: Jul 2020 Posts: 15 M MartinDorr OP Enthusiast
OP MartinDorr Enthusiast M Joined: Jul 2020 Posts: 15	One more question: The Global Preferences Audible Lead-In Volume setting does not have any effect on the actual volume of my selected count-in pattern. Is there something else I need to enable or disable, or is this a bug?

Re: Best way to get a 2 bar count-in that overlaps with a chord pickup bar? MartinDorr #663274 07/08/21 12:23 AM Beginners Forum
Joined: Oct 2008 Posts: 19,933 Australia Noel96 Veteran
Noel96 Veteran Joined: Oct 2008 Posts: 19,933 Australia	If this me, I do what Bob Calver does. Make Bar 2, the first bar of your song. This means that Bar 1 can then be used as a pick-up bar, If you right click on Bar 1, select "Insert bar" to insert a single bar. BEFORE DOING ANYTHING, though, save your song and then save it with a slightly new name. This will give you two versions of the song—the original version and the version you modify. It's always good to keep the original so that you can get back to it if you need to. Regards, Noel MY SONGS... Audiophile BIAB 2025 audios on Soundcloud

Re: Best way to get a 2 bar count-in that overlaps with a chord pickup bar? MartinDorr #663297 07/08/21 04:00 AM Beginners Forum
Joined: Apr 2013 Posts: 8,694 South Carolina C Charlie Fogle Veteran
Charlie Fogle Veteran C Joined: Apr 2013 Posts: 8,694 South Carolina	<< If possible, I’d prefer a solution within BIAB and not be forced to patch things up in a DAW. >> Is this what you're trying to achieve? An instrument starting early on beat 4 of Bar -0- and the remaining instruments starting normally at Bar 1 and also silencing the drum count-in for beat 4? If so, I can post step by step instructions how to do this in BIAB. BIAB 2025:RB 2025, Latest builds: Dell Optiplex 7040 Desktop; Windows-10-64 bit, Intel Core i7-6700 3.4GHz CPU and 16 GB Ram Memory.

Re: Best way to get a 2 bar count-in that overlaps with a chord pickup bar? Charlie Fogle #663362 07/08/21 10:13 AM Beginners Forum
Joined: Jul 2020 Posts: 15 M MartinDorr OP Enthusiast
OP MartinDorr Enthusiast M Joined: Jul 2020 Posts: 15	Yes and yes! Seems you have the magic sauce … Looking forward to your instructions.

Re: Best way to get a 2 bar count-in that overlaps with a chord pickup bar? MartinDorr #663435 07/08/21 04:43 PM Beginners Forum
Joined: Apr 2013 Posts: 8,694 South Carolina C Charlie Fogle Veteran
Charlie Fogle Veteran C Joined: Apr 2013 Posts: 8,694 South Carolina	Here you go. Here's how to make a pick up riff start before Bar 1 in BIAB 2021: * Generate the song normally. * Select a track and instrument. * Open the Audio Editor. The editor should open on the correct BIAB Mixer Channel you previously selected, if not, select that channel from the drop down menu and the WAV file should be visible. This is for RealTracks. If the instrument is MIDI, then it must be converted to a WAV file. * Select the Riff you want to use for the early pick up notes. Tip: Check the Snap Box if necessary to insure the very first of a measure is captured if this is necessary. Otherwise, just be sure to highlight all of the riff. * From the Edit Menu or use Alt-C or Command-C, Copy the highlighted riff. * Select the target Track to copy the audio to. (Audio Channel or a Utility Track) * Place the curser where you want the riff to begin and Paste. For instance, if you want the riff to begin at beat 4 of Bar zero, place the curser there. To silence the fourth beat of the Count-in: Select the Drums Track, highlight and copy the full Drum Track. Paste the count-in on a Utility Track. *Highlight the fourth beat and from the Edit Menu, select silence. Optionally, if you also want to increase the volume of the count-in, highlight the full count-in and Normalize to -3db. The reason the full drum track needs to be copied is so the original drum track can be silenced and only one drum count-in will play. Otherwise, both tracks will count-in and the fourth beat on the original track will sound and the two tracks may also not be synced correctly. Mute the original Drums Track and place the volume level to -0- (Zero) otherwise it can still be heard. One may have to vary the audio selected to come in early in order to maintain the cohesion and continuity of the track but that will be obvious. All of the other tracks will begin at Bar 1 normally. Of course, any audio from the channel can be selected to use for the Pickup riff. For example a guitar RT solo beginning at Bar 24 can be selected and copied and pasted at Beat 4, Bar 0 and be the pickup riff. With the introduction of BIAB 2021, multiple instruments can easily be copied in this way, they can also be made to create a staggered intro. (This is also possible in earlier versions but is a bit more involved so I'll only explain if for version 2021) This reads a lot busier than the process is and a single instrument pickup riff takes less than a minute to complete solely in BIAB. Hope this helps and just ask for clarification if there are any issues. Attached Files (Click to download or enlarge) (Only available when you are logged in) Pickup riff at Bar 0_4_0.png (123.3 KB, 78 downloads) Last edited by Charlie Fogle; 07/08/21 04:46 PM. BIAB 2025:RB 2025, Latest builds: Dell Optiplex 7040 Desktop; Windows-10-64 bit, Intel Core i7-6700 3.4GHz CPU and 16 GB Ram Memory.

Re: Best way to get a 2 bar count-in that overlaps with a chord pickup bar? Charlie Fogle #663443 07/08/21 07:38 PM Beginners Forum
Joined: Jul 2020 Posts: 15 M MartinDorr OP Enthusiast
OP MartinDorr Enthusiast M Joined: Jul 2020 Posts: 15	Thanks a bunch, will probably be able to try this over the weekend and report back how it worked out or what problems I ran into. Seems like not too much trouble to adapt to slightly other needs.

Re: Best way to get a 2 bar count-in that overlaps with a chord pickup bar? MartinDorr #663789 07/11/21 07:01 PM Beginners Forum
Joined: Jul 2020 Posts: 15 M MartinDorr OP Enthusiast
OP MartinDorr Enthusiast M Joined: Jul 2020 Posts: 15	Just started my first dive into the audio editing part of the exercise. After a few startup issues (BIAB crashed twice on me) I believe I managed to produce and capture a four track full band pickup and place it all in 4 utility tracks. Ran out of time to do more, but the rest of the instructions seem pretty straight forward to successfully finish what I was looking for. Big thanks again Charlie. Now I just need to develop a routine on how to do this quickly for songs with 1, 2, or 3 pickup beats. As an added benefit it will also be useful to polish up endings. Last edited by MartinDorr; 07/11/21 07:02 PM.

Re: Best way to get a 2 bar count-in that overlaps with a chord pickup bar? MartinDorr #663810 07/12/21 01:57 AM Beginners Forum
Joined: Apr 2013 Posts: 8,694 South Carolina C Charlie Fogle Veteran
Charlie Fogle Veteran C Joined: Apr 2013 Posts: 8,694 South Carolina	Originally Posted By: MartinDorr Just started my first dive into the audio editing part of the exercise. After a few startup issues (BIAB crashed twice on me) I believe I managed to produce and capture a four track full band pickup and place it all in 4 utility tracks. Ran out of time to do more, but the rest of the instructions seem pretty straight forward to successfully finish what I was looking for. Big thanks again Charlie. Now I just need to develop a routine on how to do this quickly for songs with 1, 2, or 3 pickup beats. As an added benefit it will also be useful to polish up endings. That's wonderful. You'll get the hang of it and develop a workflow quickly because the BIAB Audio Editor's functionality is similar to other DAW basic editor functions. As eduardodsv noted, the BIAB Audio Editor is versatile and adaptable to many other uses like trimming the intros and endings, copying and pasting chords to replace wrong inversions or a riff that's repeating too often. BIAB 2025:RB 2025, Latest builds: Dell Optiplex 7040 Desktop; Windows-10-64 bit, Intel Core i7-6700 3.4GHz CPU and 16 GB Ram Memory.

Re: Best way to get a 2 bar count-in that overlaps with a chord pickup bar? Charlie Fogle #663876 07/12/21 09:00 AM Beginners Forum
Joined: Jul 2020 Posts: 15 M MartinDorr OP Enthusiast
OP MartinDorr Enthusiast M Joined: Jul 2020 Posts: 15	All finished now. Decided to not copy the whole drum track and just overlayed the count-in with a louder version and pasting in the the drum part for the pickup beat. My first regenerate did not produce synchronized count-ins, but subsequent regenerate requests produced very acceptable results. On the positive side of this work around I can still change the speed and regenerate tracks and make any other structural or chordal song changes. On the negative side I can no longer make style changes as those would introduce a non-matching pickup / song style change going into the first bar. A couple of BIAB behaviors I unexpectedly stumbled over are that 1. The count-in volume control does not seem to work for real track drums (based on the parameter value range it looks like a MIDI specific setting) 2. The count-in pattern is only a global preference and not song specific, which would be nice to have for songs with different number of pickup beats. But maybe the smart lead-in option combined with a muted pickup will produce a dynamic count-in adapting to the song pickup length. 3. There seems to be no option to move an audio track segment. The workaround seems to be using repeated cut and pasts to get it in the right spot when a fine lineup with other tracks maters. 4. The snap option is almost useless for real track segment identification as track segment entries relating to different instruments are pushed slightly different and the length of notes held goes slightly beyond bar beat times. That said, a bit of patience and trial and error got me close enough to grab what I needed and placed it in sync with the rest of the song. 5. The cut function does not seem to always remove every ‘sound’ from the selected region, even when repeatedly selected and cut. The left over ‘waveform’ does not have a lot of amplitude and is always short (at least what I saw) and may just be a waveform display artifact, but it’s hard to tell for sure. Thanks again for all the feedback. It got me moving in the right direction and a good result. Last edited by MartinDorr; 07/12/21 02:42 PM.

Re: Best way to get a 2 bar count-in that overlaps with a chord pickup bar? MartinDorr #663899 07/12/21 12:11 PM Beginners Forum
Joined: Apr 2013 Posts: 8,694 South Carolina C Charlie Fogle Veteran
Charlie Fogle Veteran C Joined: Apr 2013 Posts: 8,694 South Carolina	<< 3. There seems to be no option to move an audio track segment. >> There are actually two ways to edit audio in BIAB. The Audio Editor and Edit Audio under the Audio Tab at the top of the main screen. The Audio Editor works with both the Audio Channel and the 16 Utility Tracks in BIAB 2021 although some features are disabled on the Utility Tracks. The Edit Audio is specific to the Audio Channel in every yearly version since 2014 I think and it does have a command to timeshift audio in miliseconds. The default resolution is 120 but this can increased incrementally to 1920 if my memory is correct. I recommend you continue to use and experiment editing audio in BIAB because over time you will find other behaviors of how Audio and BIAB interact that aren't duplicated in third party DAW's and some behaviors aren't to the extent in RealBand as they are in BIAB. << 4. The snap option is almost useless for real track segment identification >> This may take some experimentation and additional use. I use the Snap to option a lot in selections and placing audio as well as copy/paste tasks. It's a very powerful tool for the interaction of BIAB with audio. It allows BIAB to make very professional automatic smooth transitions, intros, endings and cross fades. Last edited by Charlie Fogle; 07/12/21 12:18 PM. BIAB 2025:RB 2025, Latest builds: Dell Optiplex 7040 Desktop; Windows-10-64 bit, Intel Core i7-6700 3.4GHz CPU and 16 GB Ram Memory.

Re: Best way to get a 2 bar count-in that overlaps with a chord pickup bar? Charlie Fogle #663919 07/12/21 02:59 PM Beginners Forum
Joined: Jul 2020 Posts: 15 M MartinDorr OP Enthusiast
OP MartinDorr Enthusiast M Joined: Jul 2020 Posts: 15	I truly appreciated your support and the detailed process description. Saved me whole bunch of time trying to find the least effort work around. Just one final question: what is the most effective way to communicate with PG Music support to resolve undocumented details of BIAB options/settings or to report potential bugs (including experienced program crashes)?

Re: Best way to get a 2 bar count-in that overlaps with a chord pickup bar? MartinDorr #663930 07/12/21 04:01 PM Beginners Forum
Joined: Jun 2012 Posts: 20,380 Melbourne, Australia AudioTrack Veteran
AudioTrack Veteran Joined: Jun 2012 Posts: 20,380 Melbourne, Australia	Originally Posted By: MartinDorr I truly appreciated your support and the detailed process description. Saved me whole bunch of time trying to find the least effort work around. Just one final question: what is the most effective way to communicate with PG Music support to resolve undocumented details of BIAB options/settings or to report potential bugs (including experienced program crashes)? There are two recommended methods: 1: Use the Chat option when this is available (see bottom RH corner) 2: email: support@pgmusic.com BIAB & RB2025 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones

Go To

Moderated by Andrew - PG Music, PeterGannon

Link Copied to Clipboard

ChatPG

Ask sales and support questions about Band-in-a-Box using natural language.

ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.

PG Music News

August 22, 2025

XPro and Xtra Styles PAKs Special Extended Until August 31st!

XPro & Xtra Styles PAKs Special Extended Until August 31st!

The XPro Styles PAKs and Xtra Styles PAKs special offers are now available until August 31st at 11:59pm PDT!

Ready to take your Band-in-a-Box® 2025 experience to the next level? Now’s the perfect time! Expand your style library with XPro and Xtra Styles PAKs—packed with a wide variety of genres to inspire your next musical creation.

What are XPro Styles and Xtra Styles PAKs?

XPro Styles PAKs are styles that work with any version (Pro, MegaPAK, UltraPAK, UltraPAK+, or Audiophile Edition) of Band-in-a-Box® 2025 (or higher). XPro Styles PAKS 1-9 includes 900 styles!

Xtra Styles PAKs are styles that work with the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box® 2025 (or higher). With over 3,500 styles (and 35 MIDI styles) included in Xtra Styles PAKs 1-20, the possibilities are endless!

Get the XPro Styles PAKs 1 - 9 for only $29 ea (Reg. $49 ea), or get them all in the XPro Styles PAK Bundle for only $149 (reg. $299)! Listen to demos and order now! For Windows or for Mac.

Note: XPro Styles PAKs require Band-in-a-Box® 2025 or higher and are compatible with ANY package, including the Pro, MegaPAK, UltraPAK, UltraPAK+, and Audiophile Edition.

Get Xtra Styles PAKs 1 - 20 are on special for only $29 each (reg $49), or get all 19 PAKs for $199 (reg $399)! Listen to demos and order now! For Windows or for Mac.

Note: The Xtra Styles require the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box®. (Xtra Styles PAK 19 requires the 2025 or higher UltraPAK, UltraPAK+, or Audiophile Edition. They will not work with the Pro or MegaPAK version because they need the RealTracks from the UltraPAK, UltraPAK+, or Audiophile Edition.

Don’t miss this chance to supercharge your Band-in-a-Box setup—at a great price!

August 06, 2025

Mac 2025 Special Upgrade Offers Extended Until August 15th!

It's not too late to upgrade to Band-in-a-Box® 2025 for Mac® and save! We've extended our special until August 15, 2025!

We've added many major new features to Band-in-a-Box® 2025 for Mac®, including advanced AI tools like the amazing BB Stem Splitter and AI Lyrics Generator, as well as VST3 plugin support, and Equalize Temp. Plus, there’s a new one-stop MIDI Patches Picker with over 1,100 MIDI patches to choose from, all neatly categorized by GM numbers. The MultiPicker Library is enhanced with tabs for the SongPicker, MIDI Patch Picker, Chord Builder, AI Lyrics Generator, and Song Titles Browser, and the tabs are organized into logical groups. The Audiophile Edition is enhanced with FLAC files , which are 60% smaller than AIFF files while maintaining identical audio quality, and now ships on a fast 1TB SSD, and much more!

Check out all the new features in Band-in-a-Box® 2025 for Mac® here:

Purchase your Band-in-a-Box® 2025 for Mac during our special to save up to 50% off your upgrade purchase and receive a FREE BONUS PAK of amazing new Add-ons. These include the 2025 RealCombos Booster PAK, Look Ma! More MIDI 13: Country & Americana, Instrumental Studies Set 22: 2-Hand Piano Soloing - Rhythm Changes, MIDI SuperTracks Set 44: Jazz Piano, Artist Performance Set 17: Songs with Vocals 7, Playable RealTracks Set 4, RealDrums Stems Set 7: Jazz with Mike Clark, and more!

Upgrade to the 2025 49-PAK for just $49 and add 20 Bonus Unreleased RealTracks and 20 RealStyles, FLAC Files for the 20 Bonus Unreleased RealTracks, Look Ma! More MIDI 14: SynthMaster, MIDI SuperTracks Set 45: More SynthMaster, Artist Performance Set 18: Songs with Vocals 8, and RealDrums Stems Set 8: Pop, Funk & More with Jerry Roe.
Learn more about the Bonus PAKs!

July 27, 2025

New RealTracks Released with Band-in-a-Box 2025!

We’ve expanded the Band-in-a-Box® RealTracks library with 202 incredible new RealTracks (in sets 449-467) across Jazz, Blues, Funk, World, Pop, Rock, Country, Americana, and Praise & Worship—featuring your most requested styles!

Jazz, Blues & World (Sets 449–455):
These RealTracks includes “Soul Jazz” with Neil Swainson (bass), Mike Clark (drums), Charles Treadway (organ), Miles Black (piano), and Brent Mason (guitar). Enjoy “Requested ’60s” jazz, classic acoustic blues with Colin Linden, and more of our popular 2-handed piano soloing. Plus, a RealTracks first—Tango with bandoneon, recorded in Argentina!

Rock & Pop (Sets 456–461):
This collection includes Disco, slap bass ‘70s/‘80s pop, modern and ‘80s metal with Andy Wood, and a unique “Songwriter Potpourri” featuring Chinese folk instruments, piano, banjo, and more. You’ll also find a muted electric guitar style (a RealTracks first!) and “Producer Layered Guitar” styles for slick "produced" sound.

Country, Americana & Praise (Sets 462–467):
We’ve added new RealTracks across bro country, Americana, praise & worship, vintage country, and songwriter piano. Highlights include Brent Mason (electric guitar), Eddie Bayers (drums), Doug Jernigan (pedal steel), John Jarvis (piano), Glen Duncan (banjo, mandolin & fiddle), Mike Harrison (electric bass) and more—offering everything from modern sounds to heartfelt Americana styles

Check out all the 202 New RealTracks (in sets 456-467)

And, if you are looking for more, the 2025 49-PAK (for $49) includes an additional 20 RealTracks with exciting new sounds and genre-spanning styles. Enjoy RealTracks firsts like Chinese instruments (guzheng & dizi), the bandoneon in an authentic Argentine tango trio, and the classic “tic-tac” baritone guitar for vintage country.

You’ll also get slick ’80s metal guitar from Andy Wood, modern metal with guitarist Nico Santora, bass player Nick Schendzielos, and drummer Aaron Stechauner, more praise & worship, indie-folk, modern/bro country with Brent Mason, and “Songwriter Americana” with Johnny Hiland.

Plus, enjoy user-requested styles like Soul Jazz RealDrums, fast Celtic Strathspey guitar, and Chill Hop piano & drums!

The 2025 49-PAK is loaded with other great new add-ons as well. Learn more about the 2025 49-PAK!

July 23, 2025

Bonus PAKs for Band-in-a-Box 2025 for Mac!

With your version 2025 for Mac Pro, MegaPAK, UltraPAK, UltraPAK+, Audiophile Edition or PlusPAK purchase, we'll include a Bonus PAK full of great new Add-ons FREE! Or upgrade to the 2025 49-PAK for only $49 to receive even more NEW Add-ons including 20 additional RealTracks!

These PAKs are loaded with additional add-ons to supercharge your Band-in-a-Box®!

This Free Bonus PAK includes:

The 2025 RealCombos Booster PAK: -For Pro customers, this includes 33 new RealTracks and 65+ new RealStyles. -For MegaPAK customers, this includes 29 new RealTracks and 45+ new RealStyles. -For UltraPAK customers, this includes 20 new RealStyles.
Look Ma! More MIDI 13: Country & Americana
Instrumental Studies Set 22: 2-Hand Piano Soloing - Rhythm Changes
MIDI SuperTracks Set 44: Jazz Piano
Artist Performance Set 17: Songs with Vocals 7
Playable RealTracks Set 4
RealDrums Stems Set 7: Jazz with Mike Clark
SynthMaster Sounds and Styles (with audio demos)
128 GM MIDI Patch Audio Demos.

Looking for more great add-ons, then upgrade to the 2025 49-PAK for just $49 and you'll get:

20 Bonus Unreleased RealTracks and RealDrums with 20 RealStyles,
FLAC Files (lossless audio files) for the 20 Bonus Unreleased RealTracks and RealDrums
Look Ma! More MIDI 14: SynthMaster,
Instrumental Studies Set 23: More '80s Hard Rock Soloing,
MIDI SuperTracks Set 45: More SynthMaster
Artist Performance Set 18: Songs with Vocals 8
RealDrums Stems Set 8: Pop, Funk & More with Jerry Roe

Learn more about the Bonus PAKs for Band-in-a-Box® 2025 for Mac®!

July 21, 2025

New! Xtra Styles PAK 20 for Band-in-a-Box 2025 and Higher for Mac!

Xtra Styles PAK 20 for Mac & Windows Band-in-a-Box version 2025 (and higher) is here with 200 brand new RealStyles!

We're excited to bring you our latest and greatest in the all new Xtra Styles PAK 20 for Band-in-a-Box! This fresh installment is packed with 200 all-new styles spanning the rock & pop, jazz, and country genres you've come to expect, as well as the exciting inclusion of electronic styles!

In this PAK you’ll discover: Minimalist Modern Funk, New Wave Synth Pop, Hard Bop Latin Groove, Gospel Country Shuffle, Cinematic Synthwave, '60s Motown, Funky Lo-Fi Bossa, Heavy 1980s Metal, Soft Muted 12-8 Folk, J-Pop Jazz Fusion, and many more!

All the Xtra Styles PAKs 1 - 20 are on special for only $29 each (reg $49), or get all 209 PAKs for $199 (reg $399)! Order now!

Learn more and listen to demos of the Xtra Styles PAK 20.

Video: Xtra Styles PAK 20 Overview & Styles Demos: Watch now!

Note: The Xtra Styles require the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box®. (Xtra Styles PAK 20 requires the 2025 or higher UltraPAK, UltraPAK+, or Audiophile Edition. They will not work with the Pro or MegaPAK version because they need the RealTracks from the UltraPAK, UltraPAK+, or Audiophile Edition.

July 21, 2025

New! XPro Styles PAK 9 for Band-in-a-Box 2025 and higher for Mac!

We've just released XPro Styles PAK 9 for Mac & Windows Band-in-a-Box version 2025 (and higher) with 100 brand new RealStyles, plus 29 RealTracks/RealDrums!

We've been hard at it to bring you the latest and greatest in this 9th installment of our popular XPro Styles PAK series! Included are 75 styles spanning the rock & pop, jazz, and country genres (25 styles each) that fans have come to expect, as well as 25 styles in this volume's wildcard genre: funk & R&B!

If you're itching to get a sneak peek at what's included in XPro Styles PAK 9, here is a small helping of what you can look forward to: Funky R&B Horns, Upbeat Celtic Rock, Jazz Fusion Salsa, Gentle Indie Folk, Cool '60s Soul, Funky '70s R&B, Smooth Jazz Hip Hop, Acoustic Rockabilly Swing, Funky Reggae Dub, Dreamy Retro Latin Jazz, Retro Soul-Rock Fusion, and much more!

Special Pricing! Until July 31, 2024, all the XPro Styles PAKs 1 - 9 are on sale for only $29 ea (Reg. $49 ea), or get them all in the XPro Styles PAK Bundle for only $149 (reg. $299)! Order now!

Learn more and listen to demos of XPro Styles PAKs.

Video: XPro Styles PAK 9 Overview & Styles Demos: Watch now!

XPro Styles PAKs require Band-in-a-Box® 2025 or higher and are compatible with ANY package, including the Pro, MegaPAK, UltraPAK, UltraPAK+, and Audiophile Edition.

July 21, 2025

New! Xtra Styles PAK 20 for Band-in-a-Box 2025 and Higher for Windows!

Xtra Styles PAK 20 for Windows & Mac Band-in-a-Box version 2025 (and higher) is here with 200 brand new RealStyles!

All the Xtra Styles PAKs 1 - 20 are on special for only $29 each (reg $49), or get all 209 PAKs for $199 (reg $399)! Order now!

Learn more and listen to demos of the Xtra Styles PAK 20.

Video: Xtra Styles PAK 20 Overview & Styles Demos: Watch now!

More News