Indeed... some good advice.

My suggestion is that if you are serious about making music using BB & RB and perhaps a DAW like Sonar or something else, you will of course want to get an external, USB connected interface that uses ASIO native drivers. The vast majority of folks here are using this or a very similar method because it works flawlessly and your latency numbers are usually in the 10ms or less range. Most folks can't hear a 10ms delay. 200ms as you indicated is very noticeable and nearly impossible to play with.

Bit depth is not as critical as sample rates. 16 or 24 with samples at 44.1k are standard. The only reason you might consider something else is if you are writing for film and they will sometimes request a higher sample rate. 48k I believe. For music listening.... 16/44.1 is default.


Last edited by Guitarhacker; 08/05/21 06:14 AM.
You can find my music at:
www.herbhartley.com
Add nothing that adds nothing to the music.
You can make excuses or you can make progress but not both.

The magic you are looking for is in the work you are avoiding.