I had a request (from Captain Moto) to describe my vocal chain/processing:
Originally Posted By: CaptainMoto
HEY FJ, A little late getting back on this but....... I'm interested in your entire vocal recording/processing.
Primarily, what's your tracking set up? Any special mics, preamps processing on the ay in.
Secondly, how are you processing your vocals, are you mixing your own work? Everything always sounds clear and present.
Any insight would be appreciated.
Thanks moto
So, I thought I would do that here (in the Recording forum). Hopefully, others will chime in and describe THEIR chain/processing. We might all learn something new...
The 3630 does a good job of bumping up the volume some on soft passages and squashing down too-loud vocals. Setting: Threshold -10 Ratio 4:1 Attack about 1 ms Release about 100ms Output 0 dB
The output from the 3630 goes into the line-in on a Focusrite Scarlett 8i6.
I have, at time, run the microphone direct into the Scarlett ,no compressor, letting the software compressors do the work. But I like having the hardware compressor (no "hot" signals) and the Aphex seems slightly "warmer" than the Scarlett. But, the Scarlett does a fine job, too.
Processing:
I process vocals in my DAW (Studio One Professional 5.4, currently). If I need to de-ess a vocal (which is most of them to some degree), I typically do that manually. By far the best way to do it. I have a number of de-esser plugins and have used them at times, but manual is best. Everyone should learn how to do that. Solo the track and zoom in on the vocal track and walk through it finding the "esses" (and tcks and ch's). They look like a elongated football (American) and are very dense (compared to sung words). Cut on both sides of the "ess" and reduce the volume of that clip - about 60-70% (eliminating them completely will sound unnatural). After a while you will recognize the shape easily and can walk through an entire vocal in 15 minutes. It is 15 minutes WELL SPENT.
A typical vocal chain is Compressor EQ Reverb Delay
I like both a reverb and a delay, but you can use either/or, too.
I often use iZotope Nectar because it provides all of the vocal chain in a sigle processor (and you can learn a lot from trying different presets).
The Nectar chain that I use most often includes: Saturation EQ Compressor De-ess Limiter Reverb Dealy
The compressor settings are simialr to my settings for the 3630.
The EQ has a small bump (up) at 80, piulled down a bit around 160 and a small bump about 3k. I often have a cut (complete roll-off) above 10k (sometime sooner - 6k, maybe). Seems like some people really jack up the high end (trying to get a clear, clean vocal that sits above the mix), but, in my opinion, that is a big mistake. Use a refrence track of a favorite, similar song and "study" the overall sound of the vocal. It might surprise you how "dull" the vocals sound. I would call them "warm" as opposed to "crisp and brittle" - which is what you get if you crank up the high end of the EQ. (Same thing happens with stereo drum tracks - folks try to get a bigger snare and kick by cranking the high EQ and just end up with those crispy, brittle hi-hats. Old ears have that tendency...)
I often turn the saturation off - or way down - because it can muddy a vocal. (All of this, of course, can change from vocal to vocal) The de-esser isn't doing much because that was taken care of before (manually). The limiter is in my go-to preset and I don't pay much attention to it. The Delay is not in that preset, but I add it in (because I like the sound of reverb + delay).
I don't use a pop filter. But I do move around a bit as I sing. I'm typically about 10" away from the microphone and will turn my head so the "thrust" of louder parts "slides to the side" of the mic. I will move in a bit closer (and sing AT the mic) for things that are at the lowest notes of my range, because those come out a LOT softer (and my low range is creeping a little higher all the time. Particularly during allergy season - which in Florida is from January to December).
I don't know if anyone will find this helpful or not. But the Cap'n asked...
If I think of anything else, I'll add it later.
Hopefully, others will add THEIR setup so there are other opinions. There are a LOT of different ways to "get it right".
Yes, yes, yes, manual de-essing is the best option and, as you wrte, becomes easier once one becomes familiar with the visual representation. I've been using the spectral visual representation in Reaper recently as it makes the esses and plosives even easier to pick - and the visual cues when editing in with PreFX Volume automation make that side of things even easier, (the reduced esses lose yellow & red as they are de-essed).
I have a couple of bits of Alesis Micro gear that are still good value and the comp/limiter is part of my bass signal chain.
The high shelf so popular these days seems to be a result of a million YouTube heads banging on about adding "air". they neglect to mention adding "air" accentuates essing and triggers artefacts when combined with reverb. I notice the Waves/Abbey Road stuff has high & low shelf stuff and buys into that as well. Perhaps with tape it was the case that such things worked pre Dolby. In fact I was listening to a chap talking about how he likes to engage the Dolby A encoder but disengage the decoder because it adds ..you guess ed .."air".
You are a singer...you have a wonderful voice/instrument with full knowledge of that instrument and how to use it. Your set up reflects that and your mic technique reinforces that you've absorbed that understanding.
As I'm not a singer and have almost no control of my voice I use a VERY heavy compressor in the box: Modern Deathcore, (no nothing like the music genre but it does "colour"),...it does a good job of levelling my vocal - doesn't remove the need for level automation but makes it easier.
I also need to carefully EQ my voice as there are two or three sections in the freq. range that are VERY weak and another that is quite strident regardless of the mic used. (recently I had a fairly really good result with a dynamic mic ...I was doing a quick audio jot for a song and didn't bother setting up one of the three condensers in the drawer...less sensitive may be the way I need to go).
As mentioned, excellent outline of a signal chain that REALLY works REALLY well. Thanks. I've renewed impetus to review what I'm doing.
Cheers rayc "What's so funny about peace, love & understanding?" - N.Lowe
Thanks fj. That was a good read ... especially given your exceptionally high bar vocals. BTW, we used an AT 4033a on stage for years. I need to revisit it sometime. Your compressor > EQ is interesting. We've always run the opposite ... a big ole FWIW.
We are rather simplistic as follows:
Pop filter > Rodes NT1 mic > Scarlett 212 interface > Logic Pro X (DAW) > Izotope Nectar Breath Control > Izotope Nectar
90% of the time we use a self created Nectar preset with the following Nectar modules in the presented order:
EQ (2db bump at 400-800HZ & 4k-6kHZ) I've used this for 30 years on her vocals. Tape Sat Vintage compressor sim - very simple single band Analog Delay (very slight) Reverb (EMT 140 Plate simulation)
Light tweaks to the above per mix needs.
Never have used Nectar's de-esser or done any manual de-essing.
Never use Nectar or Logic's pitch editors. Janice's note bending would likely detonate them
Bud
Our albums and singles are on Spotify, Apple Music, Amazon Music, YouTube Music, Pandora and more. If interested search on Janice Merritt. Thanks! Our Videos
... Your compressor > EQ is interesting. We've always run the opposite ... a big ole FWIW.
And neither of you is wrong! It's a track by track call here, which is why, for vocals, I rarely use a preset unless I know the track was done on the same equipment I used those settings on previously, end even then it's more of a 'Save/Load Group' so I have a set of various plugins all set up, as opposed to a single plugin with a preset settings.
We all do things different, all the matters is the end result.
I may start with sanding a piece of wood first then clean it before staining .. you may use thinner to clean it first, which also fluffs the grain, then lightly sand before staining .. both pieces will turn out different, but neither is wrong, and both could be nice.
I do not work here, but the benefits are still awesome Make your sound your own!
I have board in Cakewalk I use just for vocals. (Same with Drums.)
I have about 12 tracks preset with about 12 plugins I use on up to 12 vocal tracks, mixing stuff up or down depending on the song, and the flavor I am looking for.
I love Nectar 2 and the Abbey Road stuff from Waves, and also CLA Vocals, Plus, IK Multimedia's "Mic Rom" sim.
This is just the tip of the iceberg. (I use a MXL Condensor mic going into a Boss VE-20 "Vocal performer" into a Scarlett.) I like the chain and it gives me a really warm sound, with a smidgen of EQ and pitch correction before the vocal ever hits the audio interface.
Weird, I know. But it works for me.
David Snyder Songwriter/Renaissance Man Studio + Fingers
In the studio in Dallas we have two Avalon VT-737sp Channel Strips.
I have also heard good things about the Manley VOXBOX but we do not own one.
A large asortment of micorphones collected up over the years.
I sold the building in Fort Worth so after the pandemic and if I still have an interest I will buy or build a new building and re-set up.
Here at the house in Miami I have a large condenser mic and a tube pre. A waves Abbey Roads RS124 compressor. Mostly just cheap used stuff I have picked up. Never had any intent of doing any serious recording at home. More toys than tools here at home.
The pandemic and this latest health issue with tonsil cancer sugery has placed a good amount of unknowns on what I will do and what country I will live in going forward. My business here in Florida did exceptionally well in 2020 but labor issues and inability to buy everything I need in 2021 has given much though to selling out.
Nice to see others describing THEIR vocal process/chain!!
It is almost always THE most important part of getting a good sound/recording. With a truly KILLER vocal, you hardly need a Band. J&B productions are all the evidence you need...
FJ, Nice thread! Thank you and all participants for sharing, lots of interesting info. I am horrible when it comes to mixing, but slowly making some progress.
But for what it is, my most used vocal setup is this: Arturia Audiofuse interface->Neumann TLM 107 (my pride and joy) boxed in Alctron PF8 pop filter foam box (which I highly recommend to anyone recording vocals) ->Cakewalk. Recording dry.
Most common plugin bin chain: Fabfilter EQ->Fabfilter Reverb -> Nectar 2 suit d-sser... Maybe light use of Fabfilter limiter depending on track.
My vocal chain differs depending on who I'm recording and where I'm recording them. I bounce between the following:
Shure SM7B/SM57/Audio Technica AT4050/AT4047SV, A couple modified Apex 460's, Sennheiser ME64 and ME66 shotguns (mostly for dialog not singing), Sennheiser MD421-II, and a strange but effective favourite for dialogue in a Carol MUD-525. I have a pile more mics I've used, but most are for special purposes (lavalier etc) or for "effect" like my old crystal mics and the like.
Mic preamps built into either the RME Fireface 800, MOTU 828mk3, MOTU Traveler, Mackie Onyx 1640 Firewire, or my Zoom H4N.
Outboard preamps from a Digidesign Pre 8-channel (which are VERY clean up to 70db gain and very neutral), a Focusrite "Tone Factory" channel strip with EQ, comp, etc, preamps from a rebuilt/repurposed Altec 1692A mixer (lower gain but transformer input/output), channel strips from an old StarSound DynaMix console, and a bunch of custom built preamps I designed back in college.
Typically any EQ or compression I do "in the box" with whatever plugins I have available. The stock plugins in most DAWs are great - nobody needs to buy fancy plugins - really the only third party plugins I use are limiters and more "specialized" ones like dynamic EQ, multiband compressor, and those don't need to be used on everything.
I agree with Floyd about manual de-essing and removal of strange mouth sounds - it's much faster and more effective to manually edit things than to futz around with a plugin trying to get it to sound right. This is exactly how I feel on most editing tasks imho.
My physical recording chain isn't worth mentioning.
However, as soon as I get the vocal in my DAW, I'll manually slice up the phrases/words/syllables (depending on what it needs) and normalize everything.
I'll also go through and slice up sibilants and plosives, and fix them, as well as removing all breaths and such.
Other stuff, I'm still experimenting. But I find it much easier to start cleaning the vocal up manually, instead of leaving it to the compressor or de-esser.
Hey FJ, Thanks for that. This is the first time I've ventured out into this area of the forum, it was well worth it!
I absolutely agree with your comments on De-essing.
It seems I've developed a sibilance problem over time, so I frequently de-ess my vocals manually. I'm never happy with the canned De-essers, maybe I just haven't learned to use them....but doing it manually works best for me.
Here's my chain: I have a number of mics (Sm57, Sm58, Sm7B, EV RE20, Cad E70, AEA KU5A) For quite a while I was hooked on the RE20, But now I use that mostly for backing vocals. My primary vocal mics are the SM7b and the AEA KUA5 ribbon. I'm leaning heavily on the KU5A these day, It seems to help me reduce sibilance.
My pre amp is an A-Designs PACIFICA. I'm using a Black Lion B172A compressor, that provides both LA2A & 1176 style compressors.
That all goes into my Focusrite Clarett interface into Studio One.
I don't have a go-to plugin process although, I'll alternate between FABFILTER PRO Q3, Isotope Nectar and/or Waves Scheps Omni Channel.
I apply Delay/Reverb to taste, based upon the song.
Forgot to mention: I ditched my vocal condenser mics because they just picking up too much room noise. I've built a "sound isolated" & fully treated room so, now I'm shopping for a good condenser to add to my mic locker.
Interesting reads. Just wondering why you don't use a pop filter, Floyd?
I have one that I made years ago (embroidery hoop and pantyhose on a gooseneck), but it doesn't really make a difference (for me) due to how I sing into a microphone (or, actually, NOT into the mic), so I found it a distraction without much benefit....
Well this is how I am doing things right now. I've been doing recording for about 3 years now. Ever since my youngest boy finished his baseball carreer and now I have a lot more spare time.
Vocal input: XML 770 condenser microphone, no pop filter, (I don’t like it blocking my view) to Scarlet 2i2 Audio Interface.
Vocal track chain in Reaper DAW Input FX: ReaGate. Set around -60db. To reduce noise from my computer and room.
Subtractive EQ, compressor, Additive EQ, compressor, W.A. Productions Vocal Limiter I read that is was better to do the compression and eq this way. Not sure if I can tell the difference!
Vocal Reverb: ReaVerbate (set like Kenny G showed in his recent Reverb video) Vocal Delay: ReaDelay (set like Kenny G showed in his recent Delay video)
Edit split at the breaths and reduce. On the harmony tracks, edit split and delete all breaths. Nudge harmony tracks if required to line up better to main vocal.
And yes I must say that I stole Mr. Floyd's vocal technique (from your pinned video, a little bit of me goes a long long way) Singing to the side of the microphone. Seems to have reduced my sibilance too
Last Chance! The Band-in-a-Box® 2026 for Mac® Special Ends Today (May 31, 2026) at 11:59pm PDT!
Time really is running out! Save up to 50% on Band-in-a-Box® 2026 for Mac® upgrades and receive a FREE Bonus PAK—only when you order by 11:59 PM PDT today!
We've added many major new features and new content in a redesigned Band-in-a-Box® 2026 for Mac®!
Version 2026 introduces a modernized GUI redesign across the program, with updated toolbars, refreshed windows, smoother workflows, and a new Dark Mode option. There’s also a new side toolbar for quicker access to commonly used windows, and the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, making it easier to customize your workspace.
Another exciting new addition is the amazing new AI-Notes feature, which can transcribe polyphonic audio into MIDI. View the results in notation or play them back as MIDI, and choose whether to transcribe an entire track or transcribe specific parts like drums, bass, guitars/piano, or vocals. There's over 100 new features in Band-in-a-Box® 2026 for Mac®.
There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, and much more!
Upgrade your Band-in-a-Box for Mac® to save up to 50% on most Band-in-a-Box® 2026 upgrade packages!
Plus, when you order your Band-in-a-Box® 2026 Mac upgrade during our special, you'll receive a Free Bonus PAK of exciting new add-ons.
If you need any help deciding which package is the best option for you, just let us know. We are here to help!
Band-in-a-Box® 2026 Mac Special Offers Extended Until May 31st!
Good news- we've extended our Band-in-a-Box® 2026 for Mac® special offers until May 31, 2026!
Band-in-a-Box® 2026 is packed with major new features, enhancements, and an incredible lineup of new content! The program now sports a sleek, modern GUI redesign across the entire interface, including updated toolbars, refreshed windows, smoother workflows, a new dark mode option, and more. The brand-new side toolbar provides quicker access to key windows, while the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, creating a flexible, clutter-free workspace. We have an amazing new “AI-Notes” feature. This transcribes polyphonic audio into MIDI so you can view it in notation or play it back as MIDI. You can transcribe an entire track (all pitched instruments and drums) or focus on individual parts like drums, bass, guitars/piano, or vocals. There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, and much more!
There are over 100 new features in Band-in-a-Box® 2026 for Mac®.
When you order purchase Band-in-a-Box® 2026 before 11:59 PM PDT on May 31st, you'll also receive a Free Bonus PAK packed with exciting new add-ons.
Check out the Band-in-a-Box® for Mac packages page to find the best package for you.
Today's the Last Day of the Band-in-a-Box 2026® for Mac Special!
Order before 11:59pm PDT today (May 15, 2026) to save up to 50% off your Band-in-a-Box® 2026 for Mac® upgrade and receive a FREE Bonus PAK loaded with great new Add-ons to use with this new version!
Band-in-a-Box® 2026 for Mac - Special Offers End at 11:59pm PDT on Friday, May 15th, 2026!
Order before 11:59pm PDT on Friday, May 15th and SAVE up to 50% on most Band-in-a-Box® version 2026 for Mac Upgrade packages... and that's not all! With your version 2026 for Mac purchase, we'll include a Bonus PAK full of great new Add-ons FREE! Upgrade to the 2026 49-PAK to receive even more NEW Add-ons including 20 additional RealTracks... that's 222 NEW RealTracks available with version Band-in-a-Box® 2026 for Mac!
Upgrade to Band-in-a-Box® 2026 for Mac® today for as little as $49! Check out the Band-in-a-Box® packages page for all available purchase options.
Learn more about the Free Bonus PAK and 49-PAK here.
If you have any questions about which package is the best option for you, just let us know. We're here to help!
202 New RealTracks Released with Band-in-a-Box 2026!
With Band-in-a-Box® 2026, we've released 202 incredible new RealTracks (in sets 468-488) in a variety of genres—featuring your most requested styles!
Jazz, Funk & World (Sets 468-475):
Our new jazz, funk & blues RealTracks include a groovin’ collection of RealTracks and RealDrums! These include more requested “soul jazz” RealTracks featuring artists Neil Swainson (bass), Charles Treadway (organ), Brent Mason (guitar), and Wes Little (drums). There are new “smooth jazz” styles (4), which include a RealTracks first: muted trumpet, as well as slick new smooth jazz brushes options for drums. Blues lovers will be thrilled—there are more “classic acoustic blues” styles, including guitar (5), bass (4), and drums (10) with blues master Colin Linden, featuring understated and tasty background acoustic soloing, plus brushes drums and acoustic bass. There are also new electric blues RealTracks, including electric blues with PG favorite Johnny Hiland (3) and soulful electric slide guitar from Colin Linden (4). If you love funk & gospel, there are great new options this year, including gospel organ (3) from Charles Treadway, as well as new funk, tango, and rock ’n’ roll drums (3) and bass (1). And for big, bold arrangements, we have uptempo soul horns (4) featuring a three-part hip horn section with options for a full mix or stems of each individual horn — plus an accompanying rhythm section (4) of drums, bass, guitar, and electric piano!
Rock & Pop (Sets 476–482):
Our new rock & pop RealTracks bring a powerful mix of requested favorites, fresh genres, and modern chart-inspired styles! We have more of our popular “Producer Layered Acoustic Guitars (15)” featuring Band-in-a-Box favorite Brent Mason. We’ve continued our much-requested disco styles (10), and added new Celtic guitar (5) with a more basic, accessible approach than our previous Drop-D or DADGAD offerings. There are also highly requested yacht rock styles (17), inspired by the smooth, polished soft-rock sound of the late ’70s and early ’80s — laid-back grooves, silky electric pianos, warm textures, elegant harmonic movement, and pristine production aesthetics. Fans of heavier styles will love our new glam metal (13), capturing the flashy, high-energy sound of ’80s arena-ready guitar rock. We also have a set of rootsy modern-folk rock (18), with a warm, organic sound combining contemporary folk textures and driving acoustic strumming. And we’ve added lots of new modern pop styles (16) — the kinds of sounds you’re hearing on the radio today, featuring exciting new drums, synths, and cutting-edge RealTracks arrangements.
Country, & Americana (Sets 483–488):
Our new country & Americana RealTracks deliver a rich collection of acoustic, electric, and roots-inspired styles! We have new country pop (9) with legendary guitarist Brent Mason. There is also a potpourri (14) of bouzouki, guitars, banjo, and more, perfect for adding texture and character to contemporary acoustic arrangements. We’ve added funky country guitar (5) with PG favorite Brent Mason, along with classic pedal steel styles (5) featuring steel great Doug Jernigan. There are more country songwriter styles (8) that provide intimate, rootsy foundations for storytelling and modern Americana writing. Finally, we have “background soloing” acoustic guitar (12) with Brent Mason — simpler, but still very tasty acoustic lines designed to sit beautifully behind vocals or act as a subtle standalone solo part.
And, if you are looking for more, the 2026 49-PAK (for $49) includes an impressive collection of 20 bonus RealTracks, featuring exciting and inspiring additions to add to your RealTracks library. You'll get new country-rhythm guitar styles from PG Music favorites Johnny Hiland and Brent Mason, along with modern-pop grooves that capture today’s radio-ready sound! There are also new indie-folk styles with guitar, bass, 6-string bass used as a high-chording instrument, acoustic guitar, and banjo. Plus, dedicated "cymbal fills" RealDrums provide an added layer that work very well with low-key folky styles with other percussion.
The 2026 49-PAK is loaded with other great new add-ons as well. Learn more about the 2026 49-PAK!
2026 Free Bonus PAK & 49-PAK for Band-in-a-Box® 2026 for Mac®!
With your version 2026 for Mac Pro, MegaPAK, UltraPAK, UltraPAK+, Audiophile Edition or PlusPAK purchase, we'll include a Bonus PAK full of great new Add-ons for FREE! Or upgrade to the 2026 49-PAK for only $49 to receive even more NEW Add-ons including 20 additional RealTracks!
These PAKs are loaded with additional add-ons to supercharge your Band-in-a-Box®!
This Free Bonus PAK includes:
The 2026 RealCombos Booster PAK:
-For Pro customers, this includes 27 new RealTracks and 23 new RealStyles.
-For MegaPAK customers, this includes 25 new RealTracks and 23 new RealStyles.
-For UltraPAK customers, this includes 12 new RealStyles.
MIDI Styles Set 92: Look Ma! More MIDI 15: Latin Jazz
MIDI SuperTracks Set 46: Piano & Organ
Instrumental Studies Set 24: Groovin' Blues Soloing
Artist Performance Set 19: Songs with Vocals 9
Playable RealTracks Set 5
RealDrums Stems Set 9: Cool Brushes
SynthMaster Sounds Set 1 (with audio demos)
iOS Android Band-in-a-Box® App
Looking for more great add-ons, then upgrade to the 2026 49-PAK for just $49 and you'll get:
20 Bonus Unreleased RealTracks and RealDrums with 20 RealStyle.
FLAC Files (lossless audio files) for the 20 Bonus Unreleased RealTracks and RealDrums
MIDI Styles Set 93: Look Ma! More MIDI 16: SynthMaster
MIDI SuperTracks Set 47: More SynthMaster
Instrumental Studies 25 - Soul Jazz Guitar Soloing
Artist Performance Set 20: Songs with Vocals 10
RealDrums Stems Set 10: Groovin' Sticks
SynthMaster Sounds & Styles Set 2 (sounds & styles with audio demos)
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean