I tried searching this forum, but could not find an answer. Does anyone know how I can send a cc11 (I'm assuming that's the right code) to a SWAM VST to make it play? The SWAM stuff works fine when I use a controller, but to just play a tune where I select a SWAM VST for melody with no MIDI controller attached, I'm stumped. I'm not sure how to create a SYSEX file, or what it's contents would have to be. Anyone solved this ?
If I read you correctly you have a MIDI track that you want to use the Swan instrument on and you do not have a MIDI controller assigned to said track. If so you need to do is to open the MIDI track in a MIDI editor and at the vary beginning add a CC11. Or depending on your DAW you may be able to open an automation window, assign CC11 to it and draw in your volumes.
Remember that CC11 depends on the volume setting of CC7. That is CC11 at 127 (maximum setting) will only be as loud as your CC7 setting. For example of your CC7 is set at 64 then your CC11 at 127 will sound at 64.
I hope this helps and good luck.
An afterthought if you are only trying to set a given volume then open the MIDI track in one of the two above examples and use CC7, not CC11. If you are using the wind or breath controller version of your Swan device then use CC2 and not CC7.
Back in my day the only time we started panic buying was when the bartender shouted "last call"!
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
Thanks for the reply, but perhaps I wasn't clear. I am attempting to use the SWAM instruments in a BIAB MIDI track of BIAB (not another DAW.) The newer Audio Modeling instruments have a totally different interface. I just need to use the mouse to move the "Expression" slider in any direction, and then it plays in BIAB. The older instruments (Saxes and Flute) have no such option. My suspicion is that I need to send a Sysex message to perform the equivalent of "moving" a contoller to send an Expression message.
Yes I have the old saxes. But I just picked up the new trumpet patches. In the trumpet interface I clicked on the MIDI mode (the MIDI plug in the upper right hand corner). I then click on the preset option and one of the options is MIDI Mod Wheel AT Default. This setting allows the Mod Wheel to send expression messages. Do you have the same options in your Swam presets? If so that is all you need to do.
Back in my day the only time we started panic buying was when the bartender shouted "last call"!
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
I don't have a mod wheel. Anyway, the NEW UI is not that big an issue, as I just have to nudge the "Expression" slider and it works. It's the old Sax/Flute UI that I have no control over as a pure "playback" method without an attached controller.
There's an easy way to do this in BIAB - simply go to the Piano Roll, select Control then 11 Expression MSB, then in the bottom area click to add an Expression message. Please see my screenshot, it's much more clear than my typing at the moment!
Worked like a charm first time !! Many thanks. I'd never been a big piano roll user, but I can see there are some use cases. I LOVE BIAB and PG MUSIC !!!!
As long as there is an expert here, can I impose on you to answer one more question on the topic? Using the piano roll, I can send a cc23 to get a flutter tongue (flute) on a note, but do not know how to turn it off. IS there a way to toggle controls so that only one note (or a range) is affected?
Set CC23 to zero, that might turn it off. You may need to look at the plugin's manual to determine it's MIDI implementation.
There is no such thing as "Off" or "On" in MIDI CC messages themselves, only in how the synth responds to that CC message. CC messages output a range of numbers, usually from 0 to 127, and the synth itself determines what that means. In some synths 0 might be off and 127 might be on, in others it might be the opposite (I know of some synths where the sustain control is 0 to sustain and 127 to not sustain where in others it's the opposite), in some 64 might be off while 0 and 127 might be on (for example with an EQ control where you can boost or cut a frequency), and some synths might use all 3 for different parameters.
Band-in-a-Box® 2025 for Mac® users: Build 904 now available!
If you're already using Band-in-a-Box® 2025 for Mac®, make sure to grab the latest update! Build 904 is now available for download and includes the newest additions and enhancements from our team.
PowerTracks 2026 is here—bringing powerful new enhancements designed to make your production workflow faster, smoother, and more intuitive than ever.
The enhanced Mixer now shows Track Type and Instrument icons for instant track recognition, while a new grid option simplifies editing views. Non-floating windows adopt a modern title bar style, replacing the legacy blue bar.
The Master Volume is now applied at the end of the audio chain for consistent levels and full-signal master effects.
Tablature now includes a “Save bends when saving XML” option for improved compatibility with PG Music tools. Plus, you can instantly match all track heights with a simple Ctrl-release after resizing, and Add2 chords from MGU/SGU files are now fully supported... and more!
Get started today—first-time packages start at just $49.
Already using PowerTracks Pro Audio? Upgrade for as little as $29 and enjoy the latest improvements!
Band-in-a-Box 2026 for Windows Special Offers End Tomorrow (January 15th, 2026) at 11:59 PM PST!
Time really is running out! Save up to 50% on Band-in-a-Box® 2026 for Windows® upgrades and receive a FREE Bonus PAK—only when you order by 11:59 PM PST on Thursday, January 15, 2026!
We've added many major new features and new content in a redesigned Band-in-a-Box® 2026 for Windows®!
Version 2026 introduces a modernized GUI redesign across the program, with updated toolbars, refreshed windows, smoother workflows, and a new Dark Mode option. There’s also a new side toolbar for quicker access to commonly used windows, and the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, making it easier to customize your workspace.
Another exciting new addition is the new AI-Notes feature, which can transcribe polyphonic audio into MIDI. You can view the results in notation or play them back as MIDI, and choose whether to process an entire track or focus on specific parts like drums, bass, guitars/piano, or vocals. There's over 100 new features in Band-in-a-Box® 2026 for Windows®.
There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
Upgrade your Band-in-a-Box for Windows to save up to 50% on most Band-in-a-Box® 2026 upgrade packages!
Plus, when you order your Band-in-a-Box® 2026 upgrade during our special, you'll receive a Free Bonus PAK of exciting new add-ons.
If you need any help deciding which package is the best option for you, just let us know. We are here to help!
Band-in-a-Box® 2026 for Windows® Special Offers Extended Until January 15, 2026!
Good news! You still have time to upgrade to the latest version of Band-in-a-Box® for Windows® and save. Our Band-in-a-Box® 2026 for Windows® special now runs through January 15, 2025!
We've packed Band-in-a-Box® 2026 with major new features, enhancements, and an incredible lineup of new content! The program now sports a sleek, modern GUI redesign across the entire interface, including updated toolbars, refreshed windows, smoother workflows, a new dark mode option, and more. The brand-new side toolbar provides quicker access to key windows, while the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, creating a flexible, clutter-free workspace. We have an amazing new “AI-Notes” feature. This transcribes polyphonic audio into MIDI so you can view it in notation or play it back as MIDI. You can process an entire track (all pitched instruments and drums) or focus on individual parts like drums, bass, guitars/piano, or vocals. There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
There are over 100 new features in Band-in-a-Box® 2026 for Windows®.
When you order purchase Band-in-a-Box® 2026 before 11:59 PM PST on January 15th, you'll also receive a Free Bonus PAK packed with exciting new add-ons.
Upgrade to Band-in-a-Box® 2026 for Windows® today! Check out the Band-in-a-Box® packages page for all the purchase options available.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean