Gents,

I think I got lucky! Well I checked every cable from the PA to the speakers and the monitor over backwards time and time again . . . BUT, I did not check the 1/8 headphone to RCA connectors to the PA! I only go to this point as when I was doing one of the previous checks "the good side" of the stereo output quit. Silence, now nothing from either channel and I thought well great now I have blown the other side now. Then I thought, hey check from the source i.e. the earphone jack to the PA wires. But surely these little wires that never get moved and are velcroed into place could not have been damaged . . . . wrong I guess as now with a new 10.00 set of earphone to RCA cables from Radio Shack both channels are putting out like a Heidi Fleiss employee on a weekend night when the Fleet is in town.

I will now keep backups of even something as simple as this.

Hopefully this was all there was to it, and thanks again for all the wonderful support and suggestions.

Later,