I did a quick project on BIAB 2022. I rendered using the usual dialog, choosing no full render, render individual tracks, each track dry and center, no normalization.
When playing the project within BIAB, it all sounded fine with the mixer faders at their default positions. But the rendered file is probably 24 dB too hot in the bass track -- it is loud and completely distorted. The other tracks rendered fine (in their individual files.)
I tried pulling back the bass fader before rendering,m but that didn't work. I was able to get a usable file by pulling down the complete "This song" fader. That got the bass below the distortion level.
This never happened to me on any previous release. Anybody else seeing this behavior?
I did a quick project on BIAB 2022. I rendered using the usual dialog, choosing no full render, render individual tracks, each track dry and center, no normalization.
When playing the project within BIAB, it all sounded fine with the mixer faders at their default positions. But the rendered file is probably 24 dB too hot in the bass track -- it is loud and completely distorted. The other tracks rendered fine (in their individual files.)
I tried pulling back the bass fader before rendering,m but that didn't work. I was able to get a usable file by pulling down the complete "This song" fader. That got the bass below the distortion level.
This never happened to me on any previous release. Anybody else seeing this behavior?
I just tried this with that style and it worked fine.
The mixed track WAV (all tracks in one file) was fine and the individual tracks including the bass were also fine (separate WAVs for each track).
i assume youve pulled down the fader in the mixer on the bass trak ?...that dont work ? post a pik of the audio edit window for bass trak plz after being genned. best om
my songs....mixed for good earbuds...(fyi..my vocs on all songs..) https://soundcloud.com/alfsongs (90 songs created useing bb/rb) (lots of tips of mine in pg tips forum.)
i assume youve pulled down the fader in the mixer on the bass trak ?...that dont work ? post a pik of the audio edit window for bass trak plz after being genned. best om
No, As I recall, the track fader was reset automatically when I did the render, but the "This Song" was not. At least that is my recollection. I will do some additional testing Friday. Maybe I overlooked something obvious.
I loaded the demo song for _SJAZZC2 style and certainly did not find the bass to be too loud. Actually, if anything it was sitting a little in the background.
The levels were all set to 90 when I loaded the song:
BIAB & RB2025 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
I was able to do further testing. It happens on other styles. I installed at level 904, but updated to 905, and the problem is still present. To notice the problem, one does need to listen carefully, and perhaps use studio-grade speakers. On my system, the problem is blatantly obvious, but on other systems, it may not be so obvious. In all cases, the bass is at the expected level in the mix when playing directly under BIAB, but it renders about 6dB higher when you send it to WAV. That is always wrong, but depending on the style it may or may not sound distorted. With _SJAZZC2, it is horribly distorted. With _PROMSP it is twice too loud, but not badly distorted.
I was able to create a very simple song from scratch using all defaults, no special settings, and the problem is there every time. The problem is not strictly related to the rendering dialog. The same problem happens if I render a track by dragging onto the "WAV" part of the widget and then drag the rendered file to my song folder. And it happens every time, only on bass -- the other instruments are always fine.
Here is a guide to the attached files:
Loud bass _SJAZZC2.TXT is the BIAB file (in text form) of the file I started with
Played from BIAB live.mp3 is what the full mix sounds like when played under BIAB using default mixer settings. Sounds perfectly normal.
Played from BIAB live.png is a screen shot of that file in Audacity. Notice that with all the instruments in the mix, it is never close to clipping.
Bass line dragged.mp3 is the sound file when I drag-render just the bass track
Bass line dragged.png is that same file displayed in Audacity. Notice the bass track alone is much hotter than the entire mix file, and is badly clipped.
I didn't change any mixer settings -- or any other settings -- any time when saving these examples. Also note that I did not request normalization -- indeed, I didn't even use the render dialog. These are the levels that BIAB used on its own.
Aha. I think I know what is happening here. The tracks that render as stereo are coming out at the right level. The tracks that render as mono have a routing problem internal to BIAB that is doubling their level. I used _PROMSP which has 2 guitars that render mono, and those guitars are both double loud.
This is undoubtedly a bug. I'm sure it never worked like this before I have done dozens (maybe hundreds) of projects like this and would have noticed a doubling of the volume for sure.
As a test, could you try manually saving the bass to a wav file rather than dragging it.
To do this...
1. Right click on the Bass track
2. Select "Track Actions"
3. Select "Save Track as WAV File" (double check which directory it's being saved to... by default, the file will save in the same directory as the song file and it will be called "[song title] BBBass_Real_SingleRender.wav"
3. Select "Save Track as WAV File" (double check which directory it's being saved to... by default, the file will save in the same directory as the song file and it will be called "[song title] BBBass_Real_SingleRender.wav"
4. Now load that saved WAV into Audacity
Is this any better?
No. That WAV file is double loud and clipped, just like the results when dragging or when using the render dialog.. (It is mono, as expected.)
There was an issue with an earlier test version where all the channels were getting summed if you selected Solo or Mute the buttons, but I thought that was resolved.
Did you mute or solo any tracks when creating the output audio?
BIAB & RB2025 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
There was an issue with an earlier test release where all the channels were getting summed if you selected Solo or Mute the buttons, but I thought that was resolved.
Did you mute or solo any tracks when creating the output audio?
I did some solo/mute operations at first, but the files I loaded above were all done without any solo or mute. And the file I created from scratch (not loaded above) had the same problem even though I never touched solo or mute on that file.
Perhaps this is another variation of the bug you referred to. It does seem the mono tracks are being double-summed.
When you click on the "Plugins" tab on the Mixer, what does it day for the Bass track? Is it four "none" like shown on the image below?
Also, under "Options", try "Return to Factory settings" using the MOST option first up and then the ALL option if the "most" one doesn't seem to make a difference. I've often found that when BIAB does something it never used to, "Return to factory settings" solves the problem.
Lastly, is it possible that there might be a setting, or a plugin, on the Audacity track that's causing the volume increase?
Hi all! Pumps2 (and anyone else experiencing this issue) - on the mixer, are your "this song" and "all songs" faders set higher than zero? That's the only way I was able to duplicate this issue.
Cari amici
È stata aggerate la versione in Italiano del programma più amato dagli appassionati di musica, il nostro Band-in-a-Box.
Questo è il link alla nuova versione 2025.
Di seguito i link per scaricare il pacchetti di lingua italiana aggiornati per Band-in-a-Box e RealBand, anche per chi avesse già comprato la nuova versione in inglese.
Band-in-a-Box® 2025 pour Windows est disponible en Français.
Le téléchargement se fait à partir du site PG Music
Pour ceux qui auraient déjà acheté la version 2025 de Band-in-a-Box (et qui donc ont une version anglaise), il est possible de "franciser" cette version avec les patchs suivants:
Band-in-a-Box 2025 für Windows Deutsch ist verfügbar!
Die deutsche Version Band-in-a-Box® 2025 für Windows ist ab sofort verfügbar!
Alle die bereits die englische Version von Band-in-a-Box und RealBand 2024 installiert haben, finden hier die Installationsdateien für das Sprachenupdate:
Update Your Band-in-a-Box® 2025 to Build 1128 for Windows Today!
Already using Band-in-a-Box 2025 for Windows®? Download Build 1128 now from our Support Page to enjoy the latest enhancements and improvements from our team.
Already using RealBand® 2025 for Windows®? Download Build 5 now from our Support Page to ensure you have the latest enhancements and improvements from our team.
PowerTracks Pro Audio 2025 is here! This new version introduces many features, including VST3 support, the ability to load or import a .FLAC file, a reset option for track height in the Tracks window, a taller Timeline on the Notation window toolbar, new freeze buttons in the Tracks window, three toolbar modes (two rows, single row, and none), the improved Select Patch dialog with text-based search and numeric patch display, a new button in the DirectX/VST window to copy an effects group, and more!
First-time packages start at only $49. Already a PowerTracks Pro Audio user? Upgrade for as little as $29!
Video: Summary of the New Band-in-a-Box® App for iOS®
Join Tobin as he takes you on a tour of the new Band-in-a-Box® app for iOS®! Designed for musicians, singer-songwriters, and educators, this powerful tool lets you create, play, and transfer songs effortlessly on your iPhone® or iPad®—anytime, anywhere.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean