I upgraded from v2019 to v2022 yesterday and just a few minutes ago installed the Build 914 update. I was hoping this update might take care of the problem I'm having, but no joy.
First off, let me state that I was NOT having this problem with v2019. It didn't appear until just a short while ago when I loaded an existing tune and tried to change an instrument. Specifically, in the bass track, "Finger Slap Bass" was selected and I wanted to change this to "Slap Bass 1". When I did so, the bass channel's instrument remained unchanged BUT the melody channel's instrument was switched to Slap Bass. WTF. I tried again just to make sure I hadn't made a fumble-fingered mistake, but nope. Just now, to see if this sort of thing was occurring with any other channels, I tried the Piano channel, and changed its instrument -- or tried to. Sure enough, the instrument didn't change, but the melody's instrument did. Next, I tried changing the melody instrument. Well, at least this channel works as intended. But apparently, none of the others do.
Just in case it should matter, although I don't see why it should, I have Cakewalk's TTS-1 indicated as the default synth.
I went to Options>Preferences and looked around in the MIDI File, MIDI Options, and Overrides tabs, but the settings there -- which I'm assuming are 2022's default settings? -- all looked reasonable. At least nothing jumped out at me as being obviously wrong.
So, anyway, I'm hoping one of you can point out what BiaB is doing wrong here. It ain't me, because I haven't changed a thing. This is all BiaB.
Wish I could help you Michael, God knows I have tried to figure this all out since I use a lot of midi. In the past I have opted to take the midi out of BIAB as quickly as possible and figure it all out in my DAW, which has worked well for me. But I would like to do more in BIAB with Midi. However, my conclusion at this time is that this is a bad time to try to figure out the midi routing and patch assignments in BIAB due to the recent update. I have just seen the strangest stuff, similar to what you are reporting here. All I can offer is, keep reporting and things will get fixed or someone will come along who knows a lot more about this then you and I.
Mario, I've tried it on two songs so far, and it's doing the exact same thing with both of them. No, the tracks aren't frozen. They're MIDI. What's the point?
If you could duplicate this, it would be most helpful. Oh, one more thing I didn't mention earlier -- both tunes I tried this out on are MIDI only. No Real Tracks, just in case that might matter for some reason.
Dan, like you, I export my BiaB files to my DAW (Cakewalk), where I do most of my production and edits, including final instrument assignments. But still, when working in BiaB, I like to have things sound as close as I can to the way I'm picturing it. I don't know about the rest of the folks here, but when I select a style, to me that's just a starting point. I will almost always change instrument assignments as I develop a song. It would be extremely limiting to be stuck with a style's default instrumentation.
At this point, I'm convinced this is BiaB problem, since, as I mentioned above, I haven't changed a thing. Prior to the upgrade, I could change instruments either on the fly or with the song idle, didn't matter. Hopefully, the staff will find a workaround to this and will include a fix in an upcoming Build.
I got some unexpected available time so I ran some experiments. Here is what I found:
1- using both versions 912 and 914 I changed instruments and the change worked as expected. BUT I reread you message and found out that you had a melody track whereas I didn't in these experiments.
2 - using only version 914 I changed instruments but they did not change! They stayed the same sound even though the track IDs changed. The melody track was not affected like in your case.
Note I mostly work in MIDI and all of these experiments were MIDI only with no frozen tracks. Also I tried the above on 3 or 4 different existing songs and the results were always as stated above.
The conclusion is there is a bug in 2022 BiaB version 914 and maybe other versions. You may want to report this to PGmusic and reference this thread.
Like Dan I get out of BiaB as fast as I can. I do all of my instrument changes in my DAW, Studio One Pro 5.
(edit) would others please try this and report what you see. Thanx!
Last edited by MarioD; 01/02/2208:26 AM.
Principal: Your child always causes trouble in school. Me: My child causes trouble at home, do I ever call you?
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
I love that Mario used the same wording as I did: "..as fast as I can" . We both appreciate the sense of urgency for taking the midi into our DAW to process further. There is definately a lesson to be learned by our common experience.
as already reported in several other threads, I also still have that Midi patch problem - on the Soloist track, on the Utility Tracks and sometimes also on the Melody Track. It's definately a bug (since BiaB 2022, no matter which patch) - and unfortunately there has not been much reaction from PG to this, so far.
Since I use BiaB as a Playalong Tool and not for creating backing tracks or other kinds of music production, leaving BiaB as fast as I can is no solution for me :-)
Since the beginning of December, I'm quite patient on this, but a "We're working on it" from PG would really be appreciated by now.
Last edited by MoveToGroove; 01/02/2209:31 AM.
BiaB UltraPak+ 2026; Windows 10 Bass: Intermediate; Piano: Beginner I came to this forum in order to suggest feature improvements for non-professional musicians like myself that use BiaB mainly as a playalong tool and as a learning tool
I wanted to throw this out there as it may explain some of the things being reported.
I don't know this for a fact, but I believe some of the PG "demos" in recent years have essentially hard-coded the arrangments in such a manner that you can't adjust them fully. I think we have seen this with multistyles and/or multidrum demos. So while some of the demos are good starting points for our own arrangments, it could be that others are not so flexible. This is just fodder for thought until someone who knows better comes along.
Dan, it doesn't happen only with the Demo Songs, and it worked fine in BiaB 2020 (I skipped BiaB 2021, but I think others have reported that also it still worked fine in BiaB 2021).
Last edited by MoveToGroove; 01/02/2209:53 AM.
BiaB UltraPak+ 2026; Windows 10 Bass: Intermediate; Piano: Beginner I came to this forum in order to suggest feature improvements for non-professional musicians like myself that use BiaB mainly as a playalong tool and as a learning tool
Dan, interesting your observation, but in my case, no demos, or portions thereof, were used.
I haven't read up on any of these past experiences with MIDI tracks being locked -- or situations to that effect -- but it sure seems high time to me that PGM should have addressed this.
I tried the Piano channel, and changed its instrument -- or tried to. Sure enough, the instrument didn't change, but the melody's instrument did.
I can't seem to duplicate this problem. Does this happen with the ZZJAZZ demo song? -If so, can you tell us the specific steps you are using to change the patch? -If not, what style/song does it happen with?
I've had this happen to me before (and reported it, just to be told, by PGMusic support, that it was by design)...
When I right click on the description of a track that I want to change, instead of right clicking on the track name... The focus of the track doesn't shift.
However, the right click menu does come up, on the track that you right clicked on, and it makes you think that you are changing instruments on that track. But you are really modifying the track previously highlighted (because to focus didn't change when you right clicked on the track that you thought you were modifying.
Apparently this is "By Design"... See attached screen shots...
I attach a video with a little "medley" of my midi problems:
Example 1, after File - Open: Melody should be Vibraphone, but plays Piano. Example 2, after loading Demo Song Soloist should be Guitar, but plays Piano (some other times horn) Example 3, after Drag&Drop a midi: Imported tracks all play Piano
Last edited by MoveToGroove; 01/06/2205:39 AM.
BiaB UltraPak+ 2026; Windows 10 Bass: Intermediate; Piano: Beginner I came to this forum in order to suggest feature improvements for non-professional musicians like myself that use BiaB mainly as a playalong tool and as a learning tool
MoveToGroove,I did exactly the same manipulations as you and everything worked. So I can't help, just understand that you're disappointed, at the very least. I will rather think of a bad config. You must have already returned to the basic parameters, so that's not it. Really weird. Good luck! What is your Vsti/Dxi by default?
I attach a video with a little "medley" of my midi problems:
Example 1, after File - Open: Melody should be Vibraphone, but plays Piano. Example 2, after loading Demo Song Soloist should be Guitar, but plays Piano (some other times horn) Example 3, after Drag&Drop a midi: Imported tracks all play Piano
These are quite often due to embedded patch changes imported with MIDI. You could try step-editing the MIDI and deleting any you find.
I believe I've had cases in past versions where it isn't embedded CCs, though.
Last edited by Gordon Scott; 01/06/2206:44 AM.
Jazz relative beginner, starting at a much older age than was helpful. AVL:MXE Linux; Windows 11 BIAB2025 Audiophile, a bunch of other software. Kawai MP6, Ui24R, Focusrite Saffire Pro40 and Scarletts .
thanks for feeling with me, it's really annoying, since more than half of what I'd like to use BiaB for doesn't work. My Settings are as follows:
BiaB UltraPak+ 2026; Windows 10 Bass: Intermediate; Piano: Beginner I came to this forum in order to suggest feature improvements for non-professional musicians like myself that use BiaB mainly as a playalong tool and as a learning tool
this happens with many demo songs and with literally all my midis (no matter if created earlier in BiaB by myself or bought from whichever Midi Shop), and I didn't have any problems with midi patches before I installed BiaB 2022, and there are also other users that have these problems.
Last edited by MoveToGroove; 01/06/2207:24 AM.
BiaB UltraPak+ 2026; Windows 10 Bass: Intermediate; Piano: Beginner I came to this forum in order to suggest feature improvements for non-professional musicians like myself that use BiaB mainly as a playalong tool and as a learning tool
My advice would be to go back to your old version (which worked) by monitoring the forums for a possible fix. A very sad solution, but which would undoubtedly allow you to take advantage of the software? Because you could enjoy 100% of the old version? They will necessarily release a fix since there is a referenced midi problem.
yes, I have already installed my old version on a second computer. However, I hope that the issue will be fixed soon by PG, since I'd like to use the new features as well, for sure.
BiaB UltraPak+ 2026; Windows 10 Bass: Intermediate; Piano: Beginner I came to this forum in order to suggest feature improvements for non-professional musicians like myself that use BiaB mainly as a playalong tool and as a learning tool
i got exactly same problem.reported to support early december but getting nothing back except the usual ...return to factory settings run as admin delete the Mysetup.dk intrface.bbw files, roll back to previous year that it worked(making my latest purchase of bb pointless (haha)
i have given up on this problem now and have to rechannel all midi which goes on to utility tracks everytime. im exhausted the amount of times i have re booted and rolled back and tried all combinations of drivers for something that definatley worked on the 2021 version.
i dont mess around with settings on installs, i just let everythin default so everything should be as last year.
anyway, my heads in the cuckoo nest now and im done.
rebuilt styles,songs and real tracks. win 10...amd a10 radeon r6 4c+6g 1.8ghz 64 bit hp envy biab 2023 with 1004 build. styles 1 to 429 plus extras 1,2,3,4 and 6. running as admin,cleaned up returned to factory settings.
Band-in-a-Box 2026 for Windows Special Offers End Tomorrow (January 15th, 2026) at 11:59 PM PST!
Time really is running out! Save up to 50% on Band-in-a-Box® 2026 for Windows® upgrades and receive a FREE Bonus PAK—only when you order by 11:59 PM PST on Thursday, January 15, 2026!
We've added many major new features and new content in a redesigned Band-in-a-Box® 2026 for Windows®!
Version 2026 introduces a modernized GUI redesign across the program, with updated toolbars, refreshed windows, smoother workflows, and a new Dark Mode option. There’s also a new side toolbar for quicker access to commonly used windows, and the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, making it easier to customize your workspace.
Another exciting new addition is the new AI-Notes feature, which can transcribe polyphonic audio into MIDI. You can view the results in notation or play them back as MIDI, and choose whether to process an entire track or focus on specific parts like drums, bass, guitars/piano, or vocals. There's over 100 new features in Band-in-a-Box® 2026 for Windows®.
There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
Upgrade your Band-in-a-Box for Windows to save up to 50% on most Band-in-a-Box® 2026 upgrade packages!
Plus, when you order your Band-in-a-Box® 2026 upgrade during our special, you'll receive a Free Bonus PAK of exciting new add-ons.
If you need any help deciding which package is the best option for you, just let us know. We are here to help!
Band-in-a-Box® 2026 for Windows® Special Offers Extended Until January 15, 2026!
Good news! You still have time to upgrade to the latest version of Band-in-a-Box® for Windows® and save. Our Band-in-a-Box® 2026 for Windows® special now runs through January 15, 2025!
We've packed Band-in-a-Box® 2026 with major new features, enhancements, and an incredible lineup of new content! The program now sports a sleek, modern GUI redesign across the entire interface, including updated toolbars, refreshed windows, smoother workflows, a new dark mode option, and more. The brand-new side toolbar provides quicker access to key windows, while the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, creating a flexible, clutter-free workspace. We have an amazing new “AI-Notes” feature. This transcribes polyphonic audio into MIDI so you can view it in notation or play it back as MIDI. You can process an entire track (all pitched instruments and drums) or focus on individual parts like drums, bass, guitars/piano, or vocals. There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
There are over 100 new features in Band-in-a-Box® 2026 for Windows®.
When you order purchase Band-in-a-Box® 2026 before 11:59 PM PST on January 15th, you'll also receive a Free Bonus PAK packed with exciting new add-ons.
Upgrade to Band-in-a-Box® 2026 for Windows® today! Check out the Band-in-a-Box® packages page for all the purchase options available.
Band-in-a-Box 2026 Video: The Newly Designed Piano Roll Window
In this video, we explore the updated Piano Roll, complete with a modernized look and exciting new features. You’ll see new filtering options that make it easy to focus on specific note groups, smoother and more intuitive note entry and editing, and enhanced options for zooming, looping, and more.
Band-in-a-Box 2026 Video: AI Stems & Notes - split polyphonic audio into instruments and transcribe
This video demonstrates how to use the new AI-Notes feature together with the AI-Stems splitter, allowing you to select an audio file and have it separated into individual stems while transcribing each one to its own MIDI track. AI-Notes converts polyphonic audio—either full mixes or individual instruments—into MIDI that you can view in notation or play back instantly.
Bonus PAK and 49-PAK for Band-in-a-Box® 2026 for Windows®
With your version 2026 for Windows Pro, MegaPAK, UltraPAK, UltraPAK+, Audiophile Edition or PlusPAK purchase, we'll include a Bonus PAK full of great new Add-ons for FREE! Or upgrade to the 2026 49-PAK for only $49 to receive even more NEW Add-ons including 20 additional RealTracks!
These PAKs are loaded with additional add-ons to supercharge your Band-in-a-Box®!
This Free Bonus PAK includes:
The 2026 RealCombos Booster PAK:
-For Pro customers, this includes 27 new RealTracks and 23 new RealStyles.
-For MegaPAK customers, this includes 25 new RealTracks and 23 new RealStyles.
-For UltraPAK customers, this includes 12 new RealStyles.
MIDI Styles Set 92: Look Ma! More MIDI 15: Latin Jazz
MIDI SuperTracks Set 46: Piano & Organ
Instrumental Studies Set 24: Groovin' Blues Soloing
Artist Performance Set 19: Songs with Vocals 9
Playable RealTracks Set 5
RealDrums Stems Set 9: Cool Brushes
SynthMaster Sounds Set 1 (with audio demos)
Android Band-in-a-Box® App (included)
Looking for more great add-ons, then upgrade to the 2026 49-PAK for just $49 and you'll get:
20 Bonus Unreleased RealTracks and RealDrums with 20 RealStyle.
FLAC Files (lossless audio files) for the 20 Bonus Unreleased RealTracks and RealDrums
MIDI Styles Set 93: Look Ma! More MIDI 16: SynthMaster
MIDI SuperTracks Set 47: More SynthMaster
Instrumental Studies 25 - Soul Jazz Guitar Soloing
Artist Performance Set 20: Songs with Vocals 10
RealDrums Stems Set 10: Groovin' Sticks
SynthMaster Sounds & Styles Set 2 (sounds & styles with audio demos)
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
. We both appreciate the sense of urgency for taking the midi into our DAW to process further. There is definately a lesson to be learned by our common experience. 
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean