Originally Posted By: dpresley
Yes . Your workaround converts to mono. Once converted it seems to continue to work for more recordings. This is an obvious bug that should be fixed.

Why have a nono option if it doesn't work.


What sort of an interface are you using, if any at all when you do your recordings? This is more just a general piece of information and not necessarily specific to Band-in-a-Box, but often when you only hear a recording out of one channel, it can be because you’re using a two-channel audio interface and the program you're recording in to is expecting the left signal on input one and the right signal on input two. If you only have one microphone and it’s connected to Input 1 on your audio interface, you’ll only record to the left channel and the right channel will be empty.


Cheers,
Ember