Lobster.
Please run this test.
1. In ptw drivers hilite the first 4 channels in the input drivers screen.INSTEAD OF 13/14 .
ie INPUT PORTS 1 and 3...1/2 and 3/4...per your drivers graphic up thread.
2. Make sure you clik on trak 1 in the traks view per pg faq.
3. Now in line input 1 of mtk attach a drum machine or whatever and hit record in ptw…for a few seconds….and stop. DO YOU SEE in ptw trak 1 a waveform ? ..IF YOU DO…proceed to next step..
4. Attach drum machine to mtk input 2…and repeat.
ie Same steps…DO YOU SEE A RECORDED WAVEFORM ON TRAK 2 in ptw.
Repeat for attaching drum machine to input 3 of mtk…etc etc.

This everything on 14 you mention i dont see in the user manual of the mtk.
What page do you see that on ? cos it doesnt make sense to me, but i’m prepared to be proved wrong.


Please run the drum machine test BUT NOT AT HUGE LEVELS TO START and get back to me...also tell me if you see levels on the ptw recording and playback meters.

NOTE THIS FROM THE PG FAQ !!

Note: Multi-port audio recording will only work if (1) the current audio track is a Stereo audio track -or- the current audio track is Mono and the input channel is set to L+R (Options | Preferences | Audio) and (2) there are multiple audio input ports selected in Options | Preferences | Audio | Drivers. BUT YOU HAVENT SELECTED MULTIPLE INPUT PORTS.
please read faq above.

Best
om

Last edited by justanoldmuso; 02/21/22 11:37 AM.
my songs....mixed for good earbuds...(fyi..my vocs on all songs..)
https://soundcloud.com/alfsongs
(90 songs created useing bb/rb)
(lots of tips of mine in pg tips forum.)