PL, Fantastic. You often provide sensational workarounds, and these are greatly appreciated. No doubt there is a big effort to develop these.
But, with respect, we're looking for this feature to be an integrated part of the program. I think you will agree that this would be the most appropriate delivery mechanism.
I suspect that the count-in is perhaps hard-coded to the song's time-signature, but it should be able to be 'modified' to suit the correct timing of that critical first bar. That's the reality.
Can you imagine a band leader who delivers a 4/4 count-in to the band members who then must start playing in 3/4? No, neither can I, but that's what BiaB does in these circumstances.
Sorry I have to say this, but it's way past time for this issue to be resolved. It may be difficult, but it's not impossible.
BIAB & RB2025 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
Sorry I have to say this, but it's way past time for this issue to be resolved. It may be difficult, but it's not impossible.
+1
I totally agree with that. It's really rather fundamental.
I rather suspect there's some nasty under the surface that makes it very difficult ... perhaps backward compatibility issues?
I do wonder if it's tied in with the rather limited handling generally of time signatures. I appreciate that there are some weird ones around(*), but 5/4 and 12/8 are pretty common and 7/8 is not exactly rare.
(*)My wife wanted to sing with the band and wanted "Light Flight" as done by Pentangle. No worries ... the verses are in 5/4+5/4+2/4 and the chorus in 6/4.
Even Pentangle admitted they'd never worked out how to count it in properly :-)
Jazz relative beginner, starting at a much older age than was helpful. AVL:MXE Linux; Windows 11 BIAB2025 Audiophile, a bunch of other software. Kawai MP6, Ui24R, Focusrite Saffire Pro40 and Scarletts .
What I'm saying is there is no reason I can see that the method I describe can't be integrated into Biab now, like today, if I had the source code I would code it now and upload it. Whatever the first time signature is set to it will play 2 bars of that then start play at bar 1 or a custom start point. Maybe it's because they spend 6 months re-programming Mac that there is not the time left to fit these things in, I don't know......
If a song has a mix of 3/4 and 4/4 time signatures, and needs to start in 3/4, it needs to use a 4/4 style and use F5 to set the first bar to 3/4. However, this means that the count-in will be in 4/4 when the song then actually starts in 3/4.
It seems to me that it would be a whole lot more practical if Band In A Box just produced the count-in using the same time-signature as the first bar of the song. If the first bar plays in 3/4, the count in should automatically be in 3/4. This would be a great improvement.
Hopefully there is still interest from the BiaB fraternity. Feel free to comment.
BIAB & RB2025 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
I suppose if it's using a 4/4 style that 4/4 Drum will have a 4/4 count-in recorded in it, it would have to load a count-in from a 3/4 recorded drum RealDrum and set the 2 count-in bars to 3/4 but then if you have to use a 4/4 style when you have 3/4 changes then there must be a big issue stopping this if it hasn't been done by now ?
Quote:
We plan to add support for floating point tempos and any time signature, in BiaB, plug-in
maybe when this is overhauled and updated other issue will be then doable ?
I see I was the first +1 ten years ago, but I'm changing my mind. This feature as it is now makes counting in a song more adventurous to follow, and who wouldn't want that? Are all 88,000+ of you not up to the challenge? No? You would like this fixed?
BIAB 2025 Win Audiophile. Software: Studio One 7 Pro, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus 192 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.
I see I was the first +1 ten years ago, but I'm changing my mind. This feature as it is now makes counting in a song more adventurous to follow, and who wouldn't want that? Are all 88,000+ of you not up to the challenge? No? You would like this fixed?
Well, this made me smile (if I didn't laugh I'd cry). I also witnessed the use of the word 'Whoa' from this thread. Very appropriate.
Any more takers? (This is a really important bug that needs resolving)
BIAB & RB2025 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
Jazz relative beginner, starting at a much older age than was helpful. AVL:MXE Linux; Windows 11 BIAB2025 Audiophile, a bunch of other software. Kawai MP6, Ui24R, Focusrite Saffire Pro40 and Scarletts .
If a song has a mix of 3/4 and 4/4 time signatures, and needs to start in 3/4, it needs to use a 4/4 style and use F5 to set the first bar to 3/4. However, this means that the count-in will be in 4/4 when the song then actually starts in 3/4.
It seems to me that it would be a whole lot more practical if Band In A Box just produced the count-in using the same time-signature as the first bar of the song. If the first bar plays in 3/4, the count in should automatically be in 3/4. This would be a great improvement.
Hope others approve.
Regards Trevor
07/07/2016 01:13 PM
Originally Posted By: PeterGannon
Good points.
07/28/2023 05:40 PM89410 views
Originally Posted By: AudioTrack
Another nudge. PG Music agree it's a good idea.
There are lots of "good ideas" here but I thought you had to get 100,000 views, 10 pages and 10 years first ? Is this another issue where you are stuck:
Quote:
Get your programming sorted so you can implement things easily and quickly for both Win and Mac. It's like the time signatures saga that got stuck in the way they are for so long because of how they were made, it's the same with the programming way you have been stuck in for so long. All of these issues are now manifesting, the dam is starting to show it's leaks, the lid is blowing off the pressure cooker because they kept being put off for song long. Really you need to bite the bullet and New Ways of Doing Things, Quantum Leaps In Thinking You have an old car with a good engine but you keep patching the body up, going off half cocked.
Quote:
... and the 255 bar limit and I'm sure some other things.
Notes: For time signature higher than 4/4, each bar is spread out over 2 or more bars (e.g. 5/4 will be written as 3/4+2/4). So would you need 4 pre roll bars to get a 5/4 count-in to fit ? The only way I can see is have it work like the AutoHotkey script play the count-in with a metronome without playing bars -1 and 0 then start play at bar 1 OR any chosen bar to start the count-off as Reaper can do. Unless you add RealTimeSignatures so then the count-in bars will be in the real time signature and can then play the correct 2 bar count-in.
Hey can I do a + 1 Too?!?!?! I wanna say Whoa like Matt did!
(Obvious attempt to boost post count)
Hey maybe by the time this gets fixed Audio track will be call four dimensional-Ai-track, Musocity will be Nursinghomecity, Rustyspoon will get new silverware, and well Matt will still be Matt
HP Win 11 12 gig ram, Mac mini Sonoma with 16 gig of ram, BiaB 2025, Realband, Reaper 7, Harrison Mixbus 9 32c , Melodyne 5 editor, Presonus Audiobox 1818VSL, Presonus control app.
Well, in a nutshell, the program creator favored the idea many years ago, and years later still states it's a good idea. But this serious deficiency still exists in 2013.
This issue does need serious attention.
The count-in to a song is there for very good musical reasons. At the very least it tells the performers a:) when to start, b:) the song tempo, and c:) the time signature.
Musicians need an accurate count-in. Simple. Receiving a 4/4 count-in for the start of a 3/4 song is way beyond crazy. It's an extremely serious program deficiency.
BIAB & RB2025 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
Video: Band-in-a-Box® 2025 for Mac®: VST3 Plugin Support
Band-in-a-Box® 2025 for Mac® now includes support for VST3 plugins, alongside VST and AU. Use them with MIDI or audio tracks for even more creative possibilities in your music production.
Band-in-a-Box® 2025 for Macs®: VST3 Plugin Support
Video: Band-in-a-Box® 2025 for Mac®: Using VST3 Plugins
With the release of Band-in-a-Box® 2025 for Mac, we’re rolling out a collection of brand-new videos on our YouTube channel. We’ll also keep this forum post updated so you can easily find all the latest videos in one convenient spot.
From overviews of new features and walkthroughs of the 202 new RealTracks, to highlights of XPro Styles PAK 8, Xtra Styles PAKs 18, the 2025 49-PAK, and in-depth tutorials — you’ll find everything you need to explore what’s new in Band-in-a-Box® 2025.
Band-in-a-Box® 2025 for Mac is here, packed with major new features and an incredible collection of available new content! This includes 202 RealTracks (in Sets 449-467), plus 20 bonus Unreleased RealTracks in the 2025 49-PAK. There are new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 4, two new sets of “RealDrums Stems,” XPro Styles PAK 8, Xtra Styles PAK 19, and more!
Special Offers
Upgrade to Band-in-a-Box® 2025 for Mac with savings of up to 50% on most upgrade packages during our special—available until July 31, 2025! Visit our Band-in-a-Box® packages page for all the purchase options available.
2025 Free Bonus PAK & 49-PAK Add-ons
We've packed our Free Bonus PAK & 49-PAK with some incredible Add-ons! The Free Bonus PAK is automatically included with most Band-in-a-Box® for Mac 2025 packages, but for even more Add-ons (including 20 Unreleased RealTracks!) upgrade to the 2025 49-PAK for only $49. You can see the full lists of items in each package, and listen to demos here.
If you have any questions, feel free to connect with us directly—we’re here to help!
Cari amici
È stata aggerate la versione in Italiano del programma più amato dagli appassionati di musica, il nostro Band-in-a-Box.
Questo è il link alla nuova versione 2025.
Di seguito i link per scaricare il pacchetti di lingua italiana aggiornati per Band-in-a-Box e RealBand, anche per chi avesse già comprato la nuova versione in inglese.
Band-in-a-Box® 2025 pour Windows est disponible en Français.
Le téléchargement se fait à partir du site PG Music
Pour ceux qui auraient déjà acheté la version 2025 de Band-in-a-Box (et qui donc ont une version anglaise), il est possible de "franciser" cette version avec les patchs suivants:
Band-in-a-Box 2025 für Windows Deutsch ist verfügbar!
Die deutsche Version Band-in-a-Box® 2025 für Windows ist ab sofort verfügbar!
Alle die bereits die englische Version von Band-in-a-Box und RealBand 2024 installiert haben, finden hier die Installationsdateien für das Sprachenupdate:
Update Your Band-in-a-Box® 2025 to Build 1128 for Windows Today!
Already using Band-in-a-Box 2025 for Windows®? Download Build 1128 now from our Support Page to enjoy the latest enhancements and improvements from our team.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.