The batch renaming in irfanview is for graphic files not audio files (BiaB, wav, mp3, etc).
Paj, if you use it for audio files please let us know how you do it. I tried and it will not work audio files. Note that I am using the latest version of irfanview. Maybe a previous version works for audio?
The bumper sticker said "I'm a veterinarian, therefore I can drive like an animal". Suddenly I realized how many proctologists are on the road.
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
There's certainly a possibility that the renaming issue is a limitation of Windows file names.
I know from experience that Windows doesn't handle all characters in file names as well as it might.
FWIW, I often avoid characters that are not in the normal alphabet and a few others like .-_ to avoid the risk of untoward interpretation as special characters like $ : ! ( ) and so on. In my case that's because I often use scripts like bash or Python to manipulate files, when some special characters can cause mayhem.
Jazz relative beginner, starting at a much older age than was helpful. AVL:MXE Linux; Windows 11 BIAB2026 Audiophile, a bunch of other software. Kawai MP6, Ui24R, Focusrite Saffire Pro40 and Scarletts .
There's certainly a possibility that the renaming issue is a limitation of Windows file names.
I know from experience that Windows doesn't handle all characters in file names as well as it might.
FWIW, I often avoid characters that are not in the normal alphabet and a few others like .-_ to avoid the risk of untoward interpretation as special characters like $ : ! ( ) and so on. In my case that's because I often use scripts like bash or Python to manipulate files, when some special characters can cause mayhem.
I am sure that is not the problem here.
I took one of the files that just will not rename and put it in a directory all by itself. I then renamed it simply 1.sgu on the hard drive.
Now the embedded name of the song was "Off Minor". That is about as simple as you can get. When I tried to rename it via the long filename utility, BIAB simply renamed it 1.sgu.sgu on the hardrive. It if worked properly, the file should have been renamed Off Minor.sgu
That did not happen.
That in essence is the problem. I have over 300 of these song files in my collection, dating back from the very early days of BIAB, that just simply cannot be renamed by the program. I can only assume that they might have been created by one of the earliest versions of BIAB and is just not comparable with being renamed. They open just fine in the program and they do play properly, ya just can't rename any of them using the built-in utility.
Like I said, anyone can go grab the song files I put on dropbox and play with them yourself to see if you can come up with a solution.
BIAB2026 Windows 10 Pro (Never Windows 11!) WA6NCB
After testing using the songs you supplied in your dropbox link, it appears that the | File | File utilities... | Auto-rename song files to Long File Names.. | isn't working. I'll be sure to pass this along to our developers so they can create a fix for future update.
After testing using the songs you supplied in your dropbox link, it appears that the | File | File utilities... | Auto-rename song files to Long File Names.. | isn't working. I'll be sure to pass this along to our developers so they can create a fix for future update.
Thanks Jerry for looking into this. Feel free to grab all the files on the DropBox link to pass along to the Developers. I will leave them up until they can come up with a fix.
UPDATE: I just tried a little experiment which might get you going in the right direction. I noticed that everyone of the 350 song files had the same style, ZZJAZZ.STY, assigned to them. After BIAB suggested the better RT style (_JAZFRED.STY) I decided to bulk change the style of all the songs using the File-File Utilities-Change all songs in the current folder to a specific style...
Once all 350 songs were changed to _JAZFRED.STY, I then used the Long Filename utility. Lo and behold, everyone of the songs were renamed to the proper long file name on the hardrive.
I am beginning to think that the problem just might not be in the BIAB program but might have been in the song files themself.
Anyways, by changing all the songs to a new style, the Long Filename routine works. On the files where I did not change the style, I am unable to rename them.
The other drawback of using this method is that I also have a directory with 532 songs but those are a mixed batch of old styles such as ZZJAZZ ZZBOSSA ZZCOUNTRY and so on, so I cannot just bulk change those to a single style.
Anyways, the common denominator is that all of the songs that I was never able to auto rename were songs dating back to the beginning of BIAB.
Have fun with this one.
BIAB2026 Windows 10 Pro (Never Windows 11!) WA6NCB
The batch renaming in irfanview is for graphic files not audio files (BiaB, wav, mp3, etc).
Mario: It's for any files. The default viewer comes up for "Common Graphic Files"---just use the dropdown to select "All (*.*)" files
Paj, if you use it for audio files please let us know how you do it. I tried and it will not work audio files. Note that I am using the latest version of irfanview. Maybe a previous version works for audio?
[i][/i]
I haven't found a type of Window file it will not rename, with many options for the process. The file conversion process may be graphics specific but the renaming is definitely not---and there's really no reason it should be. I've been using it for renaming going on two decades or so.
Mario, I hesitate to give a step by step, not only because the info can be garnered in the iView help files, but mainly because some *%^&*@ will follow the directions and permanently loose/screw-up their files. So . . .
DISCLAIMER: DON'T FOLLOW THE FOLLOWING DIRECTIONS WITH IRREPLACEABLE OR UN-ARCHIVED FILES UNTIL YOU HAVE TRIED THEM WITH SCRATCH FILES AND ARE SURE HOW TO SUCCESSFULLY DO THE BATCH RENAME. ESPECIALLY AVOID ANY "REPLACE/RENAME ORIGINAL FILES" OPTIONS UNTIL/UNLESS YOU ACTUALLY KNOW WHAT YOU'RE DOING AND ACCEPT RESPONSIBILTY FOR THE RESULTS.
. . . but Mario, since it's you:
(1) Select Batch Conversion/Rename from the File Menu. You'll get this window: https://www.dropbox.com/s/kpeqz8grbrwbs43/BatchRenameScreen1%28Marked%29.jpg?dl=0 (2) Select Batch Rename (3) Use the "Files of type" dropdown window to select "All (*.*)" files (4) Navigate to and select (highlight) the files you want to rename in the "Look in:" window, then use the buttons above the "Input files:" window to add them to the input files list. (5) Set your desired naming pattern in "Batch rename settings: Name pattern" window. Definitely click on the [Options] button to bring up the options window---and then click on the [Help] button to see the renaming patterns/options that are available to you. In my example I rename the files "NewNameForOldnames001...006 https://www.dropbox.com/s/bmqem9lwvw6rufv/BatchRenameScreen2%28Marked%29.jpg?dl=0 https://www.dropbox.com/s/1grgvk3o4aw15io/BatchRenameScreen3%28Marked%29.jpg?dl=0
(6) Select your Output Folder. This could be any existing folder or a folder that is created by/during the renaming process. In my example, I "Browsed" to my original folder, selected that, and added "\Renames" at the end of the line to create a target folder that didn't exist. (7) Select the [Run test rename] for a non-destructive test run. If your satisfied with the displayed results, select the [Start Batch] button.
Sorry I didn't reply sooner---life.
Paj 8^)
BTW: iView 4.59 64-bit. Also worked with v4.54 32-bit.
OK. there are a few people on this topic who do not understand the problem both Roycol and myself ran into.
It has absolutely nothing to do with renaming existing file names to new file names. Heck I can do that with a myriad of file renaming utilities all day long and in my sleep. Been doing that since the days of DOS 2.2
If you read my posts, the problem is that when using the built-in file renaming utility to convert 8.x names to long file names, on some files it will just not work. The built in utility is supposed to 'read' the name of the song file contained within the SGx or MGx file structure and port that name over as a new file name that is no longer in the 8.x format. It only occurs on a very small sample of files I have in my collection, which Jerry at PG Music was able to duplicate and confirm, following my instructions and sample song files I posted on Dropbox.
Again, this has nothing to do with renaming a file to another name of your choosing. It has everything to do with getting the name of the song that is located inside the actual song file structure. See the graphic. There is absolutely no file renaming utility that can read the internal file structure of the BIAB song file and use that information to rename a file, except as provided by PGMUSIC via the Long File Name Utility....that I am aware of. Not a one of the popular file renaming programs out there will do that either singularly or in batches.
Last edited by jcland; 06/11/2204:13 PM.
BIAB2026 Windows 10 Pro (Never Windows 11!) WA6NCB
OK. there are a few people on this topic who do not understand the problem both Roycol and myself ran into.
It has absolutely nothing to do with renaming existing file names to new file names. Heck I can do that with a myriad of file renaming utilities all day long and in my sleep. Been doing that since the days of DOS 2.2
If you read my posts, the problem is that when using the built-in file renaming utility to convert 8.x names to long file names, on some files it will just not work. The built in utility is supposed to 'read' the name of the song file contained within the SGx or MGx file structure and port that name over as a new file name that is no longer in the 8.x format. It only occurs on a very small sample of files I have in my collection, which Jerry at PG Music was able to duplicate and confirm, following my instructions and sample song files I posted on Dropbox.
Again, this has nothing to do with renaming a file to another name of your choosing. It has everything to do with getting the name of the song that is located inside the actual song file structure. See the graphic. There is absolutely no file renaming utility that can read the internal file structure of the BIAB song file and use that information to rename a file, except as provided by PGMUSIC via the Long File Name Utility....that I am aware of. Not a one of the popular file renaming programs out there will do that either singularly or in batches.
I don't think they do not understand, I think they just got off on the topic of renaming files. You got a good response above from PG Music that they will pass on to the developers and then also we found out it seems to be only with the files with the old standard BIAB styles ZZ etc. All of this while using the programs built in utility for renaming files to long file names. Good find of a problem that will now hopefully be fixed.
My wife asked if I had seen the dog bowl. I told her I didn't even know he could.
Band-in-a-Box® 2025 for Mac® users: Build 904 now available!
If you're already using Band-in-a-Box® 2025 for Mac®, make sure to grab the latest update! Build 904 is now available for download and includes the newest additions and enhancements from our team.
PowerTracks 2026 is here—bringing powerful new enhancements designed to make your production workflow faster, smoother, and more intuitive than ever.
The enhanced Mixer now shows Track Type and Instrument icons for instant track recognition, while a new grid option simplifies editing views. Non-floating windows adopt a modern title bar style, replacing the legacy blue bar.
The Master Volume is now applied at the end of the audio chain for consistent levels and full-signal master effects.
Tablature now includes a “Save bends when saving XML” option for improved compatibility with PG Music tools. Plus, you can instantly match all track heights with a simple Ctrl-release after resizing, and Add2 chords from MGU/SGU files are now fully supported... and more!
Get started today—first-time packages start at just $49.
Already using PowerTracks Pro Audio? Upgrade for as little as $29 and enjoy the latest improvements!
Band-in-a-Box 2026 for Windows Special Offers End Tomorrow (January 15th, 2026) at 11:59 PM PST!
Time really is running out! Save up to 50% on Band-in-a-Box® 2026 for Windows® upgrades and receive a FREE Bonus PAK—only when you order by 11:59 PM PST on Thursday, January 15, 2026!
We've added many major new features and new content in a redesigned Band-in-a-Box® 2026 for Windows®!
Version 2026 introduces a modernized GUI redesign across the program, with updated toolbars, refreshed windows, smoother workflows, and a new Dark Mode option. There’s also a new side toolbar for quicker access to commonly used windows, and the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, making it easier to customize your workspace.
Another exciting new addition is the new AI-Notes feature, which can transcribe polyphonic audio into MIDI. You can view the results in notation or play them back as MIDI, and choose whether to process an entire track or focus on specific parts like drums, bass, guitars/piano, or vocals. There's over 100 new features in Band-in-a-Box® 2026 for Windows®.
There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
Upgrade your Band-in-a-Box for Windows to save up to 50% on most Band-in-a-Box® 2026 upgrade packages!
Plus, when you order your Band-in-a-Box® 2026 upgrade during our special, you'll receive a Free Bonus PAK of exciting new add-ons.
If you need any help deciding which package is the best option for you, just let us know. We are here to help!
Band-in-a-Box® 2026 for Windows® Special Offers Extended Until January 15, 2026!
Good news! You still have time to upgrade to the latest version of Band-in-a-Box® for Windows® and save. Our Band-in-a-Box® 2026 for Windows® special now runs through January 15, 2025!
We've packed Band-in-a-Box® 2026 with major new features, enhancements, and an incredible lineup of new content! The program now sports a sleek, modern GUI redesign across the entire interface, including updated toolbars, refreshed windows, smoother workflows, a new dark mode option, and more. The brand-new side toolbar provides quicker access to key windows, while the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, creating a flexible, clutter-free workspace. We have an amazing new “AI-Notes” feature. This transcribes polyphonic audio into MIDI so you can view it in notation or play it back as MIDI. You can process an entire track (all pitched instruments and drums) or focus on individual parts like drums, bass, guitars/piano, or vocals. There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
There are over 100 new features in Band-in-a-Box® 2026 for Windows®.
When you order purchase Band-in-a-Box® 2026 before 11:59 PM PST on January 15th, you'll also receive a Free Bonus PAK packed with exciting new add-ons.
Upgrade to Band-in-a-Box® 2026 for Windows® today! Check out the Band-in-a-Box® packages page for all the purchase options available.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean