Does anybody use a wall powered USB hub like this? I just got one and will be installing it in a few minutes. I have a 7 port now and it's really clunky. It won't make the PC run any better or anything but it will keep be from powering that many devices from the PC power supply. Between dongles for the mouse and keyboard, the camera, the Focusrite, the GPS, the Bose headphones and the et cetera... the 7 port is full. Any time I want to pop a thumb drive on to do file management I have to unplug something. 3 more ports will help. And each port is switchable so I can turn the power to each port on and off if I cared to.
I have one and it worked for a while. After a few weeks, my PC (Windows 11 up to date) started acting out. I took it off the pc and the machine started to work as before.
I use 2 of them 7 ports a piece and have had nothing but good experiences with both. I have lots of stuff that requires USB and powered hubs make a lot of sense to reduce the power coming from the PC.
My wife asked if I had seen the dog bowl. I told her I didn't even know he could.
Inateck PCIe to USB 3.2 Gen 2 Extension Card with 16 Gbps Bandwidth, 6 USB Type-A and 2 USB Type-C Ports, RedComets U22
I can tell you it was a b... to install. The tolerances were tight. But working well for past week or two. I went with the PCIe because all the stuff I have to plug in is already taking up precious desktop space. I'm also sure the red color, implying this to be very fast, helped in my descision.
Plug the hub into a USB 3 port on the back of your computer. Better, get what Dan has (I have one of those, older than his).
Problems some people run into relate to power and interrupts.
Each USB port supports a maximum power drain. There are utilities that can make it easier to view this. Each USB port may use its own channel or share with others, and devices sharing the same channel may or may not work well together. For example, I would make sure any digital audio equipment was placed on different interrupts. This may require experimentation.
BIAB 2026 Win Audiophile. Software: Fender Studio One 8, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Presonus Quantom HD8 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.
I purchased the card with two priorities, number of USB ports and speed. Number because no manchines give you enough USB ports for all the devices they have, and speed, because I move a lot of data to external drives for backup storage of VI libraries and pictues and business. And moving 6TB of data can take over a day or 2 with USB 2.0.
This card does share the speed (as they all will) and I liked how it showed what was shared.
I need all 10 of the ports. And I don't have a slot on this mobo for it. My only PCIe is where my video card is. My main problem is that I just too much crap that needs to be charged that I barely use. My Garmin GPS stays plugged in so it updates but I so rarely go anywhere I don't even really need the thing with Waze on my phone. The Bose QC-35 headphones that I bought because I could and rarely use have to stay charged. And some are stupid. The camera that sticks to the dashboard and records stuff in front of me, phones, Echo Dot... I really am an over consumer, so with all that stuff I wanted to not over consume power from one USB port.
Matt, is there still such a thing as IRQ conflicts? I haven't seen one of those in years. Don't the newer operating systems allocate those in a way that there is no conflict possible? I thought there was a change in one of the OS upgrades (like back after XP) that allowed for more IRQs but I could be wrong.
I remember setting IRQs on modems with jumpers. I used to know the numbers. 3 or 4 for modem, keyboard was 1, printer was 7... that is taking me WAY back to DOS!
Some devices may not work well on an externally powered USB hub. I forget what it was exactly.... but I did have something that said explicitly in the setup instructions NOT to run it off of a powered hub but to connect it directly to a USB port on the computer.
You can find my music at: www.herbhartley.com Add nothing that adds nothing to the music. You can make excuses or you can make progress but not both.
The magic you are looking for is in the work you are avoiding.
Well, I have often read the advice that a mouse and a keyboard should not be plugged into a USB hub on a Windows-based computer, although I forgot why if I ever did know. This is NOT the case with Macs.
Most Windows-based computers I've seen expect that the two USB ports in the upper left of the back panel will be used for mouse and keyboard.
If there is something else besides those two, I'm interested in learning about that, too.
BIAB 2026 Win Audiophile. Software: Fender Studio One 8, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Presonus Quantom HD8 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.
Some devices may not work well on an externally powered USB hub. I forget what it was exactly.... but I did have something that said explicitly in the setup instructions NOT to run it off of a powered hub but to connect it directly to a USB port on the computer.
Korg keyboards for one.
Byron Dickens
BIAB. CbB. Mixbus 32C 8 HP Envy. Intel core i7. 16GB RAM W10. Focusrite Scarlett 18i 20. Various instruments played with varying degrees of proficiency.
I'm not following why would I plug my Korg keyboard into a USB port other than using that USB port to transfer MIDI data to the computer, which I would kind of wave off by saying that I have never used USB for MIDI. And even in that case, plugging the keyboard into a
The voltage delivered from this hub is the same 5v as what is delivered by the computer. I have read over a dozen articles about these self powered hubs vs bus powered and the ones that speak of any sort of anomaly are 10 years old or older. Currently I have the dongles for my mouse and keyboard, my Garmin GPS, my Samsung tablet, my iPad, and cell phones plugged into the self powered hub and I have seen nothing wrong.
If anybody has had an issue PLEASE DO tell me so I can test it out. I will literally go buy whatever hardware resulted in a problem to test it because I'm a nerd like that.
Byron can you expand on why a Korg keyboard would have issues, and if you have seen it yourself or read that somewhere? Since, as I said. you don't actually power the keyboard by USB, but just pass MIDI through it, I'd be interested to know more.
I'm also interested to know more about the statement "Korg keyboards for one."
I would like to know how the keyboard is connected, and for what purpose (playing, downloading etc?), any software applications in use (BiaB?, others?) and what are the exact problems that were experienced. Such information would be most useful.
BIAB & RB2026 Win.(Audiophile), Windows 10 Pro & Windows 11, Cakewalk Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Session Keys Grand S & Electric R, Kontakt, Focusrite 18i20, KetronSD2, NS40M, Pioneer Active Monitors.
Take note of Jim's article and its mention of Selective Suspend.
You can do this from Control Panel, Power Options (and that's about the only place I need to make adjustments in Windows now). Under the USB power settings, Selective Suspend should be Disabled.
BIAB 2026 Win Audiophile. Software: Fender Studio One 8, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Presonus Quantom HD8 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.
Korg tells you in the documentation that they don't work plugged in to a hub.
They are correct.
Last edited by Byron Dickens; 01/02/2312:57 PM.
Byron Dickens
BIAB. CbB. Mixbus 32C 8 HP Envy. Intel core i7. 16GB RAM W10. Focusrite Scarlett 18i 20. Various instruments played with varying degrees of proficiency.
Band-in-a-Box® 2025 for Mac® users: Build 904 now available!
If you're already using Band-in-a-Box® 2025 for Mac®, make sure to grab the latest update! Build 904 is now available for download and includes the newest additions and enhancements from our team.
PowerTracks 2026 is here—bringing powerful new enhancements designed to make your production workflow faster, smoother, and more intuitive than ever.
The enhanced Mixer now shows Track Type and Instrument icons for instant track recognition, while a new grid option simplifies editing views. Non-floating windows adopt a modern title bar style, replacing the legacy blue bar.
The Master Volume is now applied at the end of the audio chain for consistent levels and full-signal master effects.
Tablature now includes a “Save bends when saving XML” option for improved compatibility with PG Music tools. Plus, you can instantly match all track heights with a simple Ctrl-release after resizing, and Add2 chords from MGU/SGU files are now fully supported... and more!
Get started today—first-time packages start at just $49.
Already using PowerTracks Pro Audio? Upgrade for as little as $29 and enjoy the latest improvements!
Band-in-a-Box 2026 for Windows Special Offers End Tomorrow (January 15th, 2026) at 11:59 PM PST!
Time really is running out! Save up to 50% on Band-in-a-Box® 2026 for Windows® upgrades and receive a FREE Bonus PAK—only when you order by 11:59 PM PST on Thursday, January 15, 2026!
We've added many major new features and new content in a redesigned Band-in-a-Box® 2026 for Windows®!
Version 2026 introduces a modernized GUI redesign across the program, with updated toolbars, refreshed windows, smoother workflows, and a new Dark Mode option. There’s also a new side toolbar for quicker access to commonly used windows, and the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, making it easier to customize your workspace.
Another exciting new addition is the new AI-Notes feature, which can transcribe polyphonic audio into MIDI. You can view the results in notation or play them back as MIDI, and choose whether to process an entire track or focus on specific parts like drums, bass, guitars/piano, or vocals. There's over 100 new features in Band-in-a-Box® 2026 for Windows®.
There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
Upgrade your Band-in-a-Box for Windows to save up to 50% on most Band-in-a-Box® 2026 upgrade packages!
Plus, when you order your Band-in-a-Box® 2026 upgrade during our special, you'll receive a Free Bonus PAK of exciting new add-ons.
If you need any help deciding which package is the best option for you, just let us know. We are here to help!
Band-in-a-Box® 2026 for Windows® Special Offers Extended Until January 15, 2026!
Good news! You still have time to upgrade to the latest version of Band-in-a-Box® for Windows® and save. Our Band-in-a-Box® 2026 for Windows® special now runs through January 15, 2025!
We've packed Band-in-a-Box® 2026 with major new features, enhancements, and an incredible lineup of new content! The program now sports a sleek, modern GUI redesign across the entire interface, including updated toolbars, refreshed windows, smoother workflows, a new dark mode option, and more. The brand-new side toolbar provides quicker access to key windows, while the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, creating a flexible, clutter-free workspace. We have an amazing new “AI-Notes” feature. This transcribes polyphonic audio into MIDI so you can view it in notation or play it back as MIDI. You can process an entire track (all pitched instruments and drums) or focus on individual parts like drums, bass, guitars/piano, or vocals. There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
There are over 100 new features in Band-in-a-Box® 2026 for Windows®.
When you order purchase Band-in-a-Box® 2026 before 11:59 PM PST on January 15th, you'll also receive a Free Bonus PAK packed with exciting new add-ons.
Upgrade to Band-in-a-Box® 2026 for Windows® today! Check out the Band-in-a-Box® packages page for all the purchase options available.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean