|
Log in to post
|
Print Thread |
|
|
|
|
|
Off-Topic
|
|
eddie1261
Unregistered
|
|
eddie1261
Unregistered
|
I'm also interested to know more about the statement "Korg keyboards for one." I should add that the only Korg I have is a Krome 61 key with a 120v power power pack that transforms down to 12v. MIDI as well as OS and patch updating are done thru the MIDI port and my Focusrite interface. It has a USB connection on it but I have never used it.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jul 2015
Posts: 2,741
Veteran
|
Veteran
Joined: Jul 2015
Posts: 2,741 |
Eddie, I also have a seven-port USB/5v with multiple 110v AC outlets. I use it to charge the zillion lights on my recumbent bikes.
For 5v stuff for the computer, I use individual modules to power the mouse, for example. I also have a digital microscope on my desk to look at insects/diseases for identification on plants I grow that uses USB power. The individual modules are of various ampere ratings, from the type to charge the cell phones to slightly larger ones for higher ampere rated devices.
The seven-port device is okay for the garage but sort of clunky for the computer desk.
All this stuff has an ampere/milliampere rating that needs to be considered and matched to the use.
I have never looked at the output of any of these devices with an oscilloscope to see how much noise/ripple they generate or even measured the voltage to see how close to 5v dc they are.
I have a bunch of them, so I may go bust one of them up and look to see how it is made and do some testing. Not that they have caused me any known problems.
Billy
“Amazing! I’ll be working with Jaco Pastorius, Charlie Parker, Art Tatum, and Buddy Rich, and you’re telling me it’s not that great of a gig?
“Well…” Saint Peter, hesitated, “God’s got this girlfriend who thinks she can sing…”
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jan 2015
Posts: 2,643
Veteran
|
|
Veteran
Joined: Jan 2015
Posts: 2,643 |
Some devices may not work well on an externally powered USB hub. Curiously I found my new BiaB audiophile version didn't want to. No big issue as I chose to copy to the internal drive anyway. I've generally reckoned that most things will work wherever, provided the port supports the throughput OK.
Jazz relative beginner, starting at a much older age than was helpful.
AVL:MXE Linux; Windows 11
BIAB2026 Audiophile, a bunch of other software.
Kawai MP6, Ui24R, Focusrite Saffire Pro40 and Scarletts
.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Dec 2003
Posts: 24,551
Veteran
|
|
Veteran
Joined: Dec 2003
Posts: 24,551 |
Some devices may not work well on an externally powered USB hub. Curiously I found my new BiaB audiophile version didn't want to. No big issue as I chose to copy to the internal drive anyway. I've generally reckoned that most things will work wherever, provided the port supports the throughput OK. A few years ago my PGM hard drive would not run from a powered hub. I haven't tried that again since then.
Back in my day the only time we started panic buying was when the bartender shouted "last call"!
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
|
eddie1261
Unregistered
|
|
eddie1261
Unregistered
|
A few years ago my PGM hard drive would not run from a powered hub. I haven't tried that again since then. But it ran okay on bus power... that is really weird. The power on this 10 port hub is exactly what comes from the USB bus on the computer. I had the VOM out yesterday and tested.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Nov 2003
Posts: 621
Journeyman
|
|
Journeyman
Joined: Nov 2003
Posts: 621 |
But it ran okay on bus power... that is really weird. The power on this 10 port hub is exactly what comes from the USB bus on the computer. I had the VOM out yesterday and tested.
But is it supplying enough amperage?
Byron Dickens BIAB. CbB. Mixbus 32C 8 HP Envy. Intel core i7. 16GB RAM W10. Focusrite Scarlett 18i 20. Various instruments played with varying degrees of proficiency. https://soundcloud.com/athanorsoundlabs
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
|
eddie1261
Unregistered
|
|
eddie1261
Unregistered
|
But is it supplying enough amperage?
Yep. Exactly mirrored the power on the USB3 port on my Dell. Very strange that stuff doesn't work. Mario, do you have to use that cable that allows you to plug into 2 ports? That would double the amps.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Dec 2003
Posts: 24,551
Veteran
|
|
Veteran
Joined: Dec 2003
Posts: 24,551 |
But is it supplying enough amperage?
Yep. Exactly mirrored the power on the USB3 port on my Dell. Very strange that stuff doesn't work. Mario, do you have to use that cable that allows you to plug into 2 ports? That would double the amps. Yes I did. But it was on a Win 10 machine or maybe when it was Win 7. It was USB2. It was some time ago.
Back in my day the only time we started panic buying was when the bartender shouted "last call"!
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jun 2012
Posts: 21,073
Veteran
|
|
Veteran
Joined: Jun 2012
Posts: 21,073 |
If it is a powered USB hub, running from the mains electricity, then surely it is designed to supply adequate power for the device loads.
Eddie, are there any specifications in terms of wattage etc on the hub?
BIAB & RB2026 Win.(Audiophile), Windows 10 Pro & Windows 11, Cakewalk Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Session Keys Grand S & Electric R, Kontakt, Focusrite 18i20, KetronSD2, NS40M, Pioneer Active Monitors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
|
eddie1261
Unregistered
|
|
eddie1261
Unregistered
|
The Amazon link: https://www.amazon.com/dp/B07Q3TYF15?psc=1&ref=ppx_yo2ov_dt_b_product_detailsACASIS 10 Ports 48W USB 3.0 Data Hub - with Individual On/Off Switches and 12V/4A Power So it delivers 4 amps at each output. I currently have the wireless keyboard and mouse adapter, a Samsung tablet, an iPad, a Garmin GPS tracker and 2 cell phones plugged into it and have seen no performance anomalies at all. When you think about it, the connection going from the power strip to the computer probably doesn't have anything connected to pin 1 and pin 4 where the power runs, only 2 and 3 where the data runs. The ports in the strip, obviously, and wired for +5v on pin 1 and ground on pin 4 on one side and of course reverse on the other so the hot sides mate.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jul 2000
Posts: 6,493
Veteran
|
|
Veteran
Joined: Jul 2000
Posts: 6,493 |
I have a footpedal on my computer that allows me to program it and use it for keystroke function(s) that I might find repetitive for a particular task. There is a little app that programs what the pedal does. The app can't see the pedal if plugged into a powered USB hub.
After programming the pedal, I can move it back to the powered hub and it will work just fine, but if I want to change it to something else, I have to move it to the computer itself.
I don't know why, I just deal with it.
Insights and incites by Notes ♫
Bob "Notes" Norton  Norton Music
https://www.nortonmusic.com
100% MIDI Super-Styles recorded by live, pro, studio musicians for a live groove
& Fake Disks for MIDI and/or RealTracks
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jun 2012
Posts: 21,073
Veteran
|
|
Veteran
Joined: Jun 2012
Posts: 21,073 |
I think we're nearly on the same page. The USB power is normally 5 volts, and that powered hub is certainly capable of delivering that 5 volts together with the power required (Watts). If there is an issue with any connection to another device, it's unlikely to be because the powered hub cannot supply the required current to maintain the 5 volt supply.
BIAB & RB2026 Win.(Audiophile), Windows 10 Pro & Windows 11, Cakewalk Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Session Keys Grand S & Electric R, Kontakt, Focusrite 18i20, KetronSD2, NS40M, Pioneer Active Monitors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
|
eddie1261
Unregistered
|
|
eddie1261
Unregistered
|
One thing to remember is that ALL USB connections are powered. Bus power delivers the same 5v as an external hub. I have looked into this topic for years and nobody has ever been able to sell me a reason why some random device cares whether it is powered by bus power or external power. My best guess is that the issue is not the power side but the data stream side. It may be that external hubs (and I will call them that because as I said, ALL USB ports are powered from somewhere) with several devices connected were trying to pass too much data through a USB 2.0 port. USB 2.9 passed data at 480 mbps. 3.0 will pass data 10 times faster at almost 5gbps. (I actually had someone try to tell me one time that you shouldn't plug a 2.0 device into a 3.0 port. Amazing. That's like saying that if your water supply is only 480 psi that pushing that water through a hose that supports 4800 psi means the water won't flow.) I would buy it if they said not to WASTE a 3.0 port with a 2.0 device and then not have a 3.0 port available when you need it. That made me question why PC manufacturers would put BOTH on a computer. If 3.0 is available, and since you put 2 of them on "this" model apparently it is, why not make them ALL 3.0 and remove the mystery?
Shall we get into the conversation as to whether even passive hubs (with no wall power supply) are in a real sense "powered" hubs because the plug into the computer and thus are bus powered?
I only bought this things because I wanted more ports but didn't want to strain my power supply. I am moving the same amount of data as I always did. And data isn't moving through it unless I make it move. There are 4 devices that are just charging. Like the GHOS for example. It does nothing with data until I start the Garmin Express software to check for updates. There are a lot of people who don't understand basic concepts yet postulate theories. Like with amperage. A power supply isn't "shoving" amperes out all the time. It delivers them when you request them, and then when the load stops, it goes back to wait status. I ran into this a lot with people who thought they understood solar power and calculating how much battery was needed. Yet they didn't get that adding a second battery in parallel maintains the 12v but adds amps. One guy literally argued with me that adding a second battery would mean I then had 24v. No concept of parallel vs series.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jan 2015
Posts: 2,643
Veteran
|
|
Veteran
Joined: Jan 2015
Posts: 2,643 |
One thing to remember is that ALL USB connections are powered. That's correct and quite fundamental. The USB protocol uses the power on/off to do things like USB device resets and to start up the enumeration process, whereby the device introduces itself to the host and they negotiate what the device wants and what the host and/or hub says it can have. USB ports have rules about what power can be taken from them and a unpowered hub can supply only what is allowed by the port into which it is plugged. Powered hubs have local autonomy on the power they can supply. My best guess is that the issue is not the power side but the data stream side. It could be both ... if the device says it wants 1A and the host or hub says it can't supply that, then the device will not operate or will operate in a lower-power mode. It may be that external hubs (and I will call them that because as I said, ALL USB ports are powered from somewhere) with several devices connected were trying to pass too much data through a USB 2.0 port. The device/hub/host will all also negotiate a throughput, but it will only be as fast as the whole chain can accept. I remember a time when thing like memory sticks would get an on-screen prompt that says they "may run faster if plugged into a USB ?.? port". Possibly that's now seen as "too hard for the average user", or maybe "Oh, they'll try another port anyway". Shall we get into the conversation as to whether even passive hubs (with no wall power supply) are in a real sense "powered" hubs because the plug into the computer and thus are bus powered? No, please don't. Better would be self-powered hubs versus host-powered hubs.
Jazz relative beginner, starting at a much older age than was helpful.
AVL:MXE Linux; Windows 11
BIAB2026 Audiophile, a bunch of other software.
Kawai MP6, Ui24R, Focusrite Saffire Pro40 and Scarletts
.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jul 2000
Posts: 27,509
Veteran
|
|
Veteran
Joined: Jul 2000
Posts: 27,509 |
...I remember a time when thing like memory sticks would get an on-screen prompt that says they "may run faster if plugged into a USB ?.? port". Possibly that's now seen as "too hard for the average user", or maybe "Oh, they'll try another port anyway"... Now that's funny. And you're right, I don't see that message anymore. I made the assumption, probably wrong, that USB 3 is ubiquitous enough now.
BIAB 2026 Win Audiophile. Software: Fender Studio One 8, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Presonus Quantom HD8 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
|
eddie1261
Unregistered
|
|
eddie1261
Unregistered
|
Now that's funny. And you're right, I don't see that message anymore. I made the assumption, probably wrong, that USB 3 is ubiquitous enough now. What's funny about that for me Matt is the concept that Fred The User can perceive that a file loads faster or slower. When you consider that to load a non executable file first the computer launches the executable attached to the file type, again, Fred The User doesn't even understand that to view that picture of Fluffy the Cat you are first launching the program you have assigned to open images. Or to play sound files, or edit word processor docs... Not one bit of that has anything to do with the speed of a USB port. I used to LOVE walking into a house to diagnose a problem and sit down at a real piece of crap computer with 4gb of RAM in it, double digit gigabytes of temp files, 4 years of browser history and a complaint that "the internet connection is really slow". Well, no it isn't. It's just that everything you do is first searching through your cache to see if that 3mb image is already on your hard drive before downloading it again. All this on a 12 mpbs connection. I did my best to be tactful but at a point you run out of polite ways to say "The problem is that you have no idea what you are doing here." I usually dump my tmp file folder several times PER DAY! Then there was the call where the issue was the CD burner wasn't working and "making a funny noise". I drove all the way over to that house, opened the CD drive to make sure the CD wasn't all scratched up to find that they had grabbed 2 CDs when they went to put a CD in to burn it. And the one who called me at 11:15pm to tell me that her kids were playing the pinball game and the computer froze, and it won't shut off even with the power button. I said "You woke me up for THAT? Have you even considered pulling the power cord out of the wall?" She sheepishly said "No." I tried to resist but I had to say it. "You are a JUDGE on the SUPREME COURT of Ohio! You are the most brilliant woman I have ever known and it never occurred to you to pull the power cord?" She just laughed and said "Nope. Go back to bed. I'll send you a check." Or the guy who held a Masters in Chemical Engineering who took my suggestion to order more RAM. He ordered an 8gb stick. The next week he called me to tell me he tried to install it and it took some force but he got it in and now the computer won't boot up. I went over there to find he had managed to force it into an IDE slot. I have NO idea how he even managed to make it fit. Matt, if you come to Herbstock I bet we could trade "IT Stories of the Damned" for hours.
Last edited by eddie1261; 01/05/23 07:08 AM.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Dec 2013
Posts: 2,732
Veteran
|
|
Veteran
Joined: Dec 2013
Posts: 2,732 |
LOL, good stuff there, Eddie. Luckily, I haven't had to deal with customers like that in my IT history.
 Steve BIAB/RB 2022, Pro Tools 2020, Korg N5, JBL LSR 4328 Powered Monitors, AKG/Shure Mics.
PC: Win11 PRO, 4 TB M2 SSD, 2 TB HD, 128 GB Memory
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
Update to Build 10 of RealBand® 2026 for Windows®!
If you're already using RealBand 2026 for Windows, download build 10 to get all the latest additions and enhancements.
Band-in-a-Box® 2025 for Mac® users: Build 904 now available!
If you're already using Band-in-a-Box® 2025 for Mac®, make sure to grab the latest update! Build 904 is now available for download and includes the newest additions and enhancements from our team.
Band-in-a-Box® 2026 for Windows® users: Build 1237 is now available!
Already a Band-in-a-Box 2026 for Windows user? Stay up to date and download the build 1237 to get all the latest additions and enhancements.
PowerTracks Pro 2026 for Windows is Here!
PowerTracks 2026 is here—bringing powerful new enhancements designed to make your production workflow faster, smoother, and more intuitive than ever.
The enhanced Mixer now shows Track Type and Instrument icons for instant track recognition, while a new grid option simplifies editing views. Non-floating windows adopt a modern title bar style, replacing the legacy blue bar.
The Master Volume is now applied at the end of the audio chain for consistent levels and full-signal master effects.
Tablature now includes a “Save bends when saving XML” option for improved compatibility with PG Music tools. Plus, you can instantly match all track heights with a simple Ctrl-release after resizing, and Add2 chords from MGU/SGU files are now fully supported... and more!
Get started today—first-time packages start at just $49.
Already using PowerTracks Pro Audio? Upgrade for as little as $29 and enjoy the latest improvements!
Order now!
Band-in-a-Box 2026 for Windows Special Offers End Tomorrow (January 15th, 2026) at 11:59 PM PST!
Time really is running out! Save up to 50% on Band-in-a-Box® 2026 for Windows® upgrades and receive a FREE Bonus PAK—only when you order by 11:59 PM PST on Thursday, January 15, 2026!
We've added many major new features and new content in a redesigned Band-in-a-Box® 2026 for Windows®!
Version 2026 introduces a modernized GUI redesign across the program, with updated toolbars, refreshed windows, smoother workflows, and a new Dark Mode option. There’s also a new side toolbar for quicker access to commonly used windows, and the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, making it easier to customize your workspace.
Another exciting new addition is the new AI-Notes feature, which can transcribe polyphonic audio into MIDI. You can view the results in notation or play them back as MIDI, and choose whether to process an entire track or focus on specific parts like drums, bass, guitars/piano, or vocals. There's over 100 new features in Band-in-a-Box® 2026 for Windows®.
There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
Upgrade your Band-in-a-Box for Windows to save up to 50% on most Band-in-a-Box® 2026 upgrade packages!
Plus, when you order your Band-in-a-Box® 2026 upgrade during our special, you'll receive a Free Bonus PAK of exciting new add-ons.
If you need any help deciding which package is the best option for you, just let us know. We are here to help!
Band-in-a-Box® 2026 for Windows® Special Offers Extended Until January 15, 2026!
Good news! You still have time to upgrade to the latest version of Band-in-a-Box® for Windows® and save. Our Band-in-a-Box® 2026 for Windows® special now runs through January 15, 2025!
We've packed Band-in-a-Box® 2026 with major new features, enhancements, and an incredible lineup of new content! The program now sports a sleek, modern GUI redesign across the entire interface, including updated toolbars, refreshed windows, smoother workflows, a new dark mode option, and more. The brand-new side toolbar provides quicker access to key windows, while the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, creating a flexible, clutter-free workspace. We have an amazing new “AI-Notes” feature. This transcribes polyphonic audio into MIDI so you can view it in notation or play it back as MIDI. You can process an entire track (all pitched instruments and drums) or focus on individual parts like drums, bass, guitars/piano, or vocals. There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
There are over 100 new features in Band-in-a-Box® 2026 for Windows®.
When you order purchase Band-in-a-Box® 2026 before 11:59 PM PST on January 15th, you'll also receive a Free Bonus PAK packed with exciting new add-ons.
Upgrade to Band-in-a-Box® 2026 for Windows® today! Check out the Band-in-a-Box® packages page for all the purchase options available.
Happy New Year!
Thank you for being part of the Band-in-a-Box® community.
Wishing you and yours a very happy 2026—Happy New Year from all of us at PG Music!
|
|
|
|
|
|
|
|
|
|
|
|
Forums57
Topics86,078
Posts799,817
Members40,028
| |
Most Online44,367
Mar 4th, 2026
|
|
|
|
|
|
|
|
|
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean